automatic transmission MERCEDES-BENZ EQE SALOON 2022 Owners Manual

R
Immediately change out of clo thing
which has been contaminated with
electrolyte.
R If an allergic reaction occurs, seek
medical attention immediatel y.The inside
rearview mir ror and the outside mir ror
on the driver's side will automatically go into anti-
dazzle mode if light from a headlamp hits the sen-
sor on the inside rearview mir ror.
Syst
Syst em limits em limits
The system will not go into anti-dazzle mode if: R The vehicle is switched o..
R Reversege ar is engaged.
R The interior lighting is switched on. F
F
r
ront-passeng
ont-passeng er outside mirr
er outside mirr or par
or parking position
king position
function
function The parking position makes parking easier. The front-passenger outside mir
rorwill swivel
down wards in the direction of there ar wheel on
th e front passenger's side when:
R the parking position is stored (/ page 159).
R the front-passenger mir ror is selected.
R reve rsege ar is engaged.
The front-passenger outside mir rorwill mo veback
to its original position when:
R you shiT the transmission toano ther transmis-
sion position.
R you are tr avelling at a speed greater than
15 km/h.
R you press the button forth e outside mir ror on
th e driver's side. S
S
t
tor
or ing t
ing t he par
he par king position of t
king position of t he fr
he front-
ont-
passeng
passeng er outside mirr
er outside mirr or usingrev
or using rever
erse g
se g ear
ear S S
t
t or or ing
ing #
Select the front-passenger outside mir ror
using button 2. #
Engage reve rsege ar. #
Movethe front-passenger outside mir ror into
th e desired parking position using button 1. Light and sight
159
159

R
you press button 1twice more. #
T
To switc
o switc h on t
h on the v
he vehicle:
ehicle: press button 1
twice.
Indicator and warning lamps light up on the
driver's displa y.
The vehicle is switched o. again if one of thefo l-
lowing conditions is met:
R you do not start theve hicle within 15 minutes
and the transmission is in position jorthe
electric parking brake is applied.
R you press button 1once. S S
t
tar
ar ting t
ting t he v
he vehicle
ehicle S
S
t
tar
ar ting t
ting t he v
he vehicle wit
ehicle wit h t
h the st
he st ar
ar t/st
t/st op butt
op butt on
on
R
R eq
eq uir
uir ements:
ements:
R theke y is in theve hicle and is recognised. #
ShiT the transmission toposition jori. #
Depress the brake pedal and press button 1
once.
R theve hicle is star ted. R
theõ display appears on the driver's
displa y:theve hicle can be driven. #
Ifth eve hicle does not start: switch o. non-
essential consumers and press but ton1
once. #
Ifth eve hicle still does not start and thePlace
the key in the marked space See Owner's
Manual display message appears on the driv-
er's displa y: starttheve hicle with theke y in
th e mar ked space (emer gency ope ration
mode) (/ page 180).
% You can switch o. theve hicle while driving. To
do this, press button 1for about thre e sec-
onds or press button 1thre e times within
th re e seconds. The transmission will shiT to
neutral iautomaticall y.When you press but-
to n1 again, theve hicle will start again and
yo u can engage drive position hagain. Be
sure toobser vethe saf ety no tes conce rning
th is under "Driving tips" (/ page 181).
Obser veany information rega rding display mes-
sages that may be displ ayed on the driver's dis-
pla y. S
S t tar
ar ting t
ting t he v
he vehicle wit
ehicle wit h t
h the ke
he key in t
y in t he mark
he mark ed
ed
space (emerg
space (emerg ency oper
ency operation mode)
ation mode)
If th eve hicle does not start and thePlace the
key in the marked space See Owner's Manual
display message appears on the driver's displa y,
yo u can start theve hicle in emer gency ope ration
mode. #
Make sure that mar ked space 2is em pty. #
Remo vekey1 from theke yring. #
Place key1 in mar ked space 2onthe sym-
bol.
The vehicle will start aTer a short time. 180 180
Driving and parking

Eng
Eng
aging neutr
aging neutr al N
al N #
Depress the brake pedal and push the DIRECT
SELECT le ver up or down tothe /rst point of
re sis tance, holding it there until the transmis-
sion position iis shown on the driver's dis-
pla y.
Subse quently releasing the brake pedal will allow
yo uto mo vetheve hicle freel y,e.g. topush it or
to w it away.
If y
If y ou w
ou w ant t
ant the tr
he tr ansmission t
ansmission t o r
o remain in neutr
emain in neutr al
al
N ev
N even if t
en if t he v
he vehicle is switc
ehicle is switc hed
hedo.:
o.: #
Start theve hicle. #
Depress the brake pedal and engage neutral
i. #
Release the brake pedal. #
Switch o. theve hicle.
% Ifyo uth en exitth eve hicle leaving theke y in
th eve hicle, the transmission will remain in
neut rali.
Eng
Eng aging par
aging par k position P
k position P #
Obser vethe no tes on parking theve hicle
(/ page 212). #
Depress the brake pedal until theve hicle
comes toa standstill. #
When theve hicle is at a standstill, press but-
to nj.
Pa rk position is only engaged when the trans-
mission position display jis shown in the
driver's displa y.If no transmission position dis-
play jappears, secure theve hicle toprev ent
it from rolling away.
Pa rk position jis engaged automatically if one
of thefo llowing conditions is met:
R You switch theve hicle o. in transmission posi-
tion hork.
R You open the driver's door when theve hicle is
at a standstill or when driving at a very low
speed and the transmission is in position h
or k.
% Tomanoeuv rewith an open driver's door,
open the driver's door while at a standstill and
engage transmission position hork again.
% Ifyo u ha veengaged park position jor
switched o. theve hicle and no transmission position displ
ayis displa yed, secure theve hi-
cle from rolling away (/ page 215).
Eng
Eng aging dr
aging dr iv
ive position D
e position D #
Dep ress the brake pedal and push the DIRECT
SELECT le ver down past the /r stpoint of
re sis tance. F
F
unction of t
unction of t he 4MA
he 4MATIC
TIC
The 0exible all-wheel distribution of the 4MATIC
means the drive is alw ays ideal lydist ributed
between bo thaxles. Depending on the situation,
only the front axle or only there ar axle can be
driven, or the drive can be distributed continu-
ously between bo thaxles.
This means that recuperation can be used even
more e.ectively and thera nge of theve hicle can
be increased (/ page 184).
To get her with ESP ®
and 4ETS, 4MATIC impr oves
th e traction of your vehicle whene ver a driven
wheel spins due toinsu1cient traction.
If yo ufa ilto adapt your driving style, 4MATIC can
neither reduce therisk of an accident nor override
th e la wsof ph ysics. It cannot take into account 192
192
Driving and parking

#
Remo vecharging cable connector 3from
th eve hicle soc ket within 30 seconds.
ATer the 30 seconds ha veelapsed, theve hicle
soc ket will be loc ked again and thech arging
process will resume.
% Ifyo u cannot remo vethech arging cable con-
nector, repeat the unlocking procedure. If the
ch arging cable connector is still loc ked, con-
ta ct a quali/ed specialist workshop.
% Status displ ay1 indicator lamp remains lit
fo r some time aTer thech arging cable con-
nector has been remo ved and then goes out. #
Close the soc ket 0ap.
Fo rve hicles with an elect ric soc ket 0ap,
obser vethefo llowing no tes on closing the
soc ket 0ap. #
Remo vethech arging cable connector from
th e mains soc ket, or from the soc ket on the
wa llbox/charging station, and st owtheve hi-
cle's charging cable safely in theve hicle
(/ page 193). The elect
ric soc ket 0ap closes automatically in
th efo llowing situations:
R shortly aTer thech arging cable connector has
been remo ved
R aTer the soc ket 0ap has been tapped in the
direction toclose it
R aTer transmission position i,hork has
been engaged
A
A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he electr
he electric
ic
soc ke
soc ket
t0ap
0ap
If an obstacle impedes the electric soc ket 0ap
during the closing process, the soc ket 0ap opens
again automatically and the driver's display sho ws
a cor responding display message. The automatic
re ve rsing function is only an aid and is not a sub-
stitute foryo ur attentiveness. #
When closing the soc ket 0ap, make sure that
no body parts or objects are in the closing
area. S
S
t
tar
ar ting t
ting t he dir
he dir ect curr
ect curr ent c
ent char
harging pr
ging process ocess
(mode 4)
(mode 4) &
D
DAN
AN GER
GER Risk of death when charging at a
damaged soc ket
The charging process uses high voltage.
If th ech arging cable, theve hicle soc ket or the
mains soc ket are damaged, you could receive
an elect ric shoc k. #
Only use an undamaged charging cable. #
Avoid mechanical damage such as crush-
ing, abrading or driving overth e cable. #
Have a damaged vehicle soc ketre placed
at a quali/ed specialist workshop as
soon as possible. #
Never connect thech arging cable to a
damaged vehicle soc ket. Driving and parking
205
205

%
Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop.
% Status displ ay1 indicator lamp remains lit
fo r some time aTer thech arging cable con-
nector has been remo ved and then goes out. #
Insert soc ket co ver4 into the lo werve hicle
soc ket connection. #
Close the soc ket 0ap.
Fo rve hicles with an elect ric soc ket 0ap,
obser vethe no tes at the end of the section. Combo 2 v
Combo 2 v
ehicle socket
ehicle soc ket #
Press charging inter ruption button 2.
The charging process is ended. Status displ ay
1 lights up white. The vehicle soc ket is
unloc ked. #
Remo vecharging cable connector 3from
th eve hicle soc ket. %
Ifyo u cannot remo vethech arging cable con-
nector, unlock theve hicle and repeat the pro-
cedure. If thech arging cable connector is still
loc ked, contact a quali/ed specialist work-
shop.
% Status displ ay1 indicator lamp remains lit
fo r some time aTer thech arging cable con-
nector has been remo ved and then goes out. #
Insert soc ket co ver4 into the lo werve hicle
soc ket connection. #
Close the soc ket 0ap.
Fo rve hicles with an elect ric soc ket 0ap,
obser vethefo llowing no tes on closing the
soc ket 0ap.
The electric soc ket 0ap closes automatically in
th efo llowing situations:
R shortly aTer thech arging cable connector has
been remo ved
R aTer the soc ket 0ap has been tapped in the
direction toclose it
R aTer the transmission position i,hork
has been engaged Driving and parking
209
209

re
lie vesth e load on the brake system and pre-
ve nts the brakes from overheating and wearing
to oqu ickl y.
Do not use cruise control in thefo llowing situa-
tions:
R in tra1c situations which requ ire frequent
ch anges of speed, e.g. in heavy tra1c, on
winding roads
R on slippery roads. Accelerating can cause the
drive wheels tolose traction and theve hicle
could then skid.
R when visibility is poor
F
F unction of t
unction of t he limit
he limiter
er
The limiter restricts the speed of theve hicle. To
re duce the speed tothe set speed, the limiter
applies the brakes automaticall y.
Yo u can limit the speed as follo ws:
R V
V ar
ar iable:
iable: for a short-term speed restriction,
e.g. in built-up areas
R P
P er
er manent
manent :
:fo r a longer-term speed restric-
tion, e.g. in winter ty remode Yo
u can store any speed abo ve20 km/h up tothe
maximum design speed or up tothe set winter
tyre limit. You can also per form settings while the
ve hicle is stationary if theve hicle has been star-
te d.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 217).
Mer
Mer cedes‑
cedes‑ AMG v
AMG vehicles:
ehicles: the limiter is available
up toa maximum speed of 250 km/h.
Displ ay
Display s in t
s in the dr
he dr iv
iver's display
er's display
R È (gre y): variable limi ter is selected but not
yet activated.
R È (0ashes grey):variable limi ter is temp o-
rari lypassive.
R È (gre en): variable limi ter is activated.
A stored speed appears under theÈ display
and is indicated in the speedome ter.
If yo u depress the accelerator pedal be yond the
pressure point (kickdown), theva riable limi ter
switches topassive mode. The Èpassive
message appears in the driver's display and the
È display 0ashes. The
variable limi ter is reactivated in thefo llowing
situations:
R Ifth eve hicle speed drops below the stored
speed.
R Ifth e stored speed is called up.
R Ifyo u store a new speed.
Oper
Oper ating cr
ating cr uise contr
uise control or t ol or the v
he var
ariable limit
iable limit er
er &
W
WARNING
ARNING Risk of accident due tostored
speed
If yo u call up the stored speed and this is
lo we rth an your cur rent speed, theve hicle
decelerates. #
Take into account the tra1c situation
before calling up the stored speed. R
R
eq
eq uir
uir ements:
ements:
Cruise control R Cruise control is selected.
R ESP ®
must be activated, but not inter vening.
R The vehicle speed is at least 20 km/h.
R The transmission is in position h.228
228
Driving and parking

Please no
tethat you can only use Remo te
Pa rking Assist if you ha veava lid driving
licence and are in a /t state todrive.
Re mo teParking Assist par ksyour vehicle or exits
th e parking space while you are outside of your
ve hicle. You can monitor the manoeuvring and
parking procedure on your mobile phone.
Wi th Remo teParking Assist, you can car ryout all
th e parking procedures of Active Parking Assist.
Yo u can also position theve hicle directly in front
of a garage or a driv eway entrance and then use
Re mo teParking Assist toenter or exit a parking
space.
Re mo teParking Assist manages pulling away,
braking and steering. While Remo teParking Assist
is active, theve hicle is loc ked.
Re mo teParking Assist is only an aid. It is not a
substitute foryo ur attention tothe sur roundings.
The responsibility for safe manoeuvring and par k-
ing remains with you. Inter rupt or term inate the
parking procedure if necessar y.Make sure that no
persons, animals or objects etc. are in the
manoeuv ring range. Make sure toalso pay atten-
tion toother vehicles. Syst
Syst em limits em limits
If th e system de tects a malfunction or a system
limit during the manoeuvring or parking proce-
dure, the procedure will be cancelled:
R The vehicle is brought toa standstill.
R Transmission position jis selected and the
electric parking brake is applied automaticall y.
R The vehicle is switched o..
R The vehicle remains loc ked.
If th e parking manoeuvre is cancelled, a cor re-
sponding message is displa yed on the mobile
phone.
Depending on the situation, you can then take
cont rol of the procedure, manoeuvre theve hicle
back tothe starting position or manually take con-
trol of theve hicle.
The system limits of Active Parking Assist apply
(/ page 275).
Cer tain environmental conditions, suc has snowfall
or heavy rain, may lead toa parking space being
measured inaccurately or toconnection problems
with the mobile phone. Only use Remo teParking
Assist on le vel, high-g rip gr ound. During
the parking procedure, you should not
stand more than appr ox. 3.0 m away from the
ve hicle. Atgre ater dis tances, the procedure will
be inter rupted and a cor responding message will
be displ ayed on the mobile phone. If you mo ve
closer totheve hicle, you will be able tocontinue
th e procedure.
Oper
Oper ating R ating R emot
emote P
e Par
arking Assist
king Assist
R
R eq
eq uir
uir ements:
ements:
Fo rth eRe mo teParking Assist function, you
re qu ire a mobile phone and the cur rent Remo te
Pa rking Assist App foryo ur vehicle type.
% A list of compatible phones can be found at:
https://www.mercedes-benz-mobile.com/
The following operating systems are suppor ted:
R Android™
R Apple ®
iOS &
W
WARNING
ARNING Danger due toinsu1cient view
of theve hicle sur roundings
If yo u manoeuvre, park or exit a parking space
with theve hicle using Remo teParking Assist,
obser vethefo llowing: Driving and parking
281
281

%
Alternati vely,yo u can begin parking with
Ac tive Parking Assist (/ page 277) and con-
tinue with theRe mo teParking Assist from any
ve hicle position. Todo this, stop the parking
process and adjust thege arbox setting j. #
Switch o. theve hicle and exit it with thekey.
S
S t
tar
ar ting t
ting t he par
he par king pr
king pr ocedur
ocedur e wit
e without selecting
hout selecting
in adv
in adv ance
ance #
Stop theve hicle and select transmission posi-
tion j. #
Switch o. theve hicle and exit it with thekey.
S
S t
tar
ar ting t
ting t he par
he par king pr
king pr ocedur
ocedur e while outside t
e while outside t he
he
v
v ehicle
ehicle #
Unlock theve hicle.
Carr Carr ying out a par ying out a par king pr
king procedur
ocedur e wit
e with R
h R emo te
emo te
P
P ar
ar king Assist
king Assist
% Keep theve hicle key with you during the par k-
ing procedure. You can cancel the parking
procedure and bring theve hicle toa standstill
by pressing a button on thekey.
% On completion of the parking procedure, the
ve hicle is loc ked. If
yo u ha vestar tedth e parking procedure as
described abo ve,th eve hicle is ready toconnect
to your mobile phone for a limited time. #
Start theRe mo teParking Assist App on the
mobile phone and connect totheve hicle. #
Follow the inst ructions of theRe mo teParking
Assist App.
% The turn signal indicator is automatically
switched on when starting parking and
switched o. when it is comple ted.
% Ifth e connection between theve hicle and the
mobile phone is inter rupted while a parking
manoeuvre is being per form ed, the manoeu-
vre can be continued if the connection is re-
established within a short time. &
W WARNING
ARNING Risk of accident due tovehicle
swinging out while parking or pulling out
of a parking space
While parking or pulling out of a parking
space, theve hicle swings out and can drive
onto areas of the oncoming lane. This could cause
youto collide with objects or
ot her road users. #
Pay attention toobjects and other road
users. #
Where necessar y,stop theve hicle or
cancel the parking procedure with
Re mo teParking Assist. #
ATer ending the parking procedure, ensure
th at all vehicle doors, wind ows and the boot
are closed. Secure theve hicle against rolling
awa y.
Cancelling t Cancelling t he par
he parking pr
king pr ocedure
ocedure
Yo u can cancel the parking procedure of Remo te
Pa rking Assist at any time and bring theve hicle to
a standstill. #
Cancel the parking procedure in theRe mo te
Pa rking Assist App.
or #
Press a button on theve hicle key.
or #
Pull a door handle. Driving and parking
283
283

Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating mobile communication equipment in
th eve hicle. &
W
WARNING
ARNING Risk of injury due toobjects
being st owed incor rectly
If objects in theve hicle interior are st owed
incor rectl y,they can slide or be thro wn around
and hit vehicle occupants. In addition, cup
holders, open st owage spaces and mobile
phone recep tacles cannot alw aysreta in all
objects within.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Always st owobjects so that they cannot
be thro wn around in such situations. #
Always make sure that objects do not
pr otru de from st owage spaces, lug gage
nets or st owage nets. #
Close the loc kable st owage spaces
before starting a jou rney. #
Always st owand secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot/load compartment. Obser
vethe additional information on st owing
mobile communications devices cor rectl y:
R Loading theve hicle (/ page 124)
Blu et
Bluet ooth
oo th® ®
connection:
connection:
The menu view and theav ailable functions in the
te lephone menu are in part dependent on the
Blue tooth ®
pro/le of the connected mobile
phone. If the mobile phone supports all thefo l-
lowing Blue tooth ®
pro/les, the full range of fea-
tures is available:
R PBAP (Phone Book Access Pro/le)
- The contacts on the mobile phone are
shown automatically on the multimedia
system.
R MAP (Message Access Pro/le)
- The mobile phone message functions can
be used on the multimedia system.
R HFP (hands-free pro/le) -
Wireless telephony is available on the mul-
timedia system.
R SAP (SIM Access Pro/le)
- The car telephone has access tothe SIM
card data and dials into the mobile phone
network via theex terior aerial.
Ir re specti veofthis, Blue tooth ®
audio functionality
can byused with any mobile radio unit.
Fo r information on thera nge of functions of the
mobile radio unit tobe connected, see the manu-
fa cturer's operating instructions.
N
N e etw
tw or
ork connection:
k connection:
The following cases can lead tothe call being dis-
connected while theve hicle is in motion:
R You switch into a transmission/reception sta-
tion, in which no communication channel is
free.
R The SIM card used is not compatible with the
network available
R A mobile phone with "Twincard" is log ged into
th e network with the second SIM card at the
same time 342
342
MBUX multimedia system

More information on Mercedes me: https://
ww w.mercedes.me
T
T r
ransf
ansf err
erred dat
ed dat a dur
a during a Mer
ing a Mer cedes me call
cedes me call
If yo u initiate a service call using Mercedes me,
data is transfer redto enable targeted advice and
an e1cient service.
The following requ irements must be ful/lled for
th e transfer of the data:
R The vehicle is switched on.
R The required da tatransfer tech nology is sup-
por tedby the mobile phone network pr ovider.
R The quality of the mobile connection is su1-
cient.
Multi-s tage transfer depends on thefo llowing fac-
to rs:
R Reason forth e initiation of the call
R The available mobile phone transmission tech-
nology.
R The activated Mercedes me connect services.
R The service selected in thevo ice control sys-
te m. %
A prom ptfor consent tothe data transfer only
occurs if the cor responding Mercedes me
connect service is not activated.
Dat
Dat a tr
a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e no
e no t activ
t activ at
ated
ed
If no Mercedes me connect services are activated
and the data pr otection prom pthas been con-
/rmed thefo llowing data is transmitted:
R Vehicle identi/cation number
R Time of the call
R Reason forth e initiation of the call
R Con/ rmation of the data pr otection prompt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle
If a call is made for a service appointment via the
service reminder, thefo llowing data is also trans-
mitted:
R Current mileage and maintenance data If a call is made aTer automatic accident or break-
down de
tection using the multimedia system, the
fo llowing data is also transmitted:
R Current mileage and maintenance data
R Current vehicle location
If Ac cident and Breakdown Management is called
via thevo ice control system and no service has
been activated, but the data pr otection query has
been con/ rmed, thefo llowing data can also be
called up from theve hicle bythe Mercedes-Benz
Customer Centre:
R Current vehicle location
If th e data pr otection prom pthas been rejec ted,
th efo llowing data is transmitted toenable targe-
te d advice and an e1cient service:
R Reason forth e initiation of the call
R Rejection of the data pr otection prom pt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle MBUX multimedia system
347 347