light MERCEDES-BENZ G-Class 2007 W463 Comand Manual

150 Navigation*
During route guidance
This function allows you to select an
intermediate destination while route
guidance is active. A stopover destination
may be a gas station or a restaurant or any
other place. When the route to the
stopover destination is calculated, the
system calculates the route from the
stopover destination to the main
destination.
Entering a stopover destination
Activate the soft key display
(
page 146).
Press the Stopovr soft key.
The map is displayed in full view.
or
The Stopover still active menu will
appear (
page 152) if a stopover
already exists.Available soft keys
After pressing a softkey on the left side, a
corresponding list (
page 151) or, if a POI
is close by, the map will appear with one
POI spotlighted (
page 166).
 soft key:
Shows a list of Mercedes-Benz Centers
near your location.
 soft key:
Shows a list of filling stations or the
map with one filling station spotlighted.
 soft key:
Shows a list of parking facilities or the
map with one parking facility
spotlighted.
 soft key:
Shows a list of restaurants or the map
with one restaurant highlighted.
 soft key:
Shows a list of hospitals or the map
with one hospital spotlighted.
If you press this soft key the following
warning message will appear:
Stopover function

151 Navigation*
During route guidance
More soft key:
If you press this soft key, the
Navigation main menu (
page 114)
will appear.
Enter stopover will
appear on the status bar.
You can now enter an stopover
destination by
selecting one from the destination
memory (
page 160)
typing one in the Enter street menu
(
page 118)
selecting one in the Last
destinations
memory
(
page 159)
selecting a Point of interest
(
page 163)
entering a POI by phone number
(
page 167)
selecting one in the Today’s
plan
memory (page 169)
Press a soft key, e.g. .
One of the following displays will
appear
a list with restaurants (see below)
the map with one restaurant
spotlighted if the POI is close by.
Select a POI on the map
(
page 166).
The arrows indicate the direction of the
destination. The distances indicated are
straight line distances to the destination.Selecting a POI in a list
Push the joystick to G or g to
select an entry.
Use the Page soft keys to scroll page-
wise through the list (if available).
Press the Details soft key if required.
Details on the destination are shown.
After you have selected a destination,
press E.
The Start route guidance menu will
appear (
page 135).
Press E.
The system calculates the route to the
selected stopover destination. After
that, the route to the main destination
is also calculated from the stopover
destination.

166 Navigation*
POIs (Points of Interest)
Press c.
The full view of the map will appear.
Your current position and the special
destinations are indicated by symbols.
Press any soft key.
The soft key displays will appear.
If required, move the map pushing the
joystick to H, h, g, G,F or
f.
Press the POIs soft key.
One of the POI is spotlighted. The name
belonging to it is shown on the status
bar.
Use the Next or Prev. soft key
to select the desired POI.
Press the Details soft key if required.
Details on the POI selected are shown.
Press E.
The Start route guidance menu will
appear (
page 135).
Selecting a POI on the map
i
You can define which symbols will be
shown on the map (
page 154).

167 Navigation*
POIs (Points of Interest)
If a phone number is associated with a POI,
the number can be used to select a
destination and making a call. The
database uses phone numbers in the USA
and Canada.
Activating the Navigation main menu
(
page 114).
Push the joystick to G to select menu
item
Phone number.
Press E.
The
Enter POI phone number menu will
appear.
Use the number keys 1 through 0
to enter the phone number.
or
Push the joystick to h, H, g or
G to select the numbers. After each
selection, press E.
Push the joystick to F or f to
select numbers diagonally.
When the number is complete, the (
field is highlighted.
Press E.
The Start route guidance menu will
appear (
page 135).
Entering a POI by phone number
i
The menu always appears with the “1”
prefix in first line.
i
Numbers not available for entry are
greyed out.
i
Multiple matches to a phone number
can occur if several businesses share a
number, or if a central number is used
to cover multiple locations. In these
cases, you will see a list to choose
among them.

178 Service
SMS*
Press the Detail soft key.
The list entry will appear in full in a
window.
Line-by-line scrolling through the SMS
Received list:
Push the joystick to g or G
to highlight the desired message.
Back to the Service main menu:
Press the Back soft key.
In the SMS Received (page 177) list,
push the joystick to g or G to
highlight the desired message.
Press E.
The message is displayed. In the status
bar, the name or the phone number of
the sender will appear.Line-by-line scrolling through the message
text:
Push the joystick to g or G.
Back to the SMS Received list:
Press the Back soft key.
Reading SMS message received

182 System settings
System settings

System settings
Press C.
In the Service main menu
(
page 176), press the System soft
key.
System settings menu
In the System settings menu you can:
select the time zone and daylight
savings time settings
select the language (page 183)
switch verification and notification
tones on and off (
page 184)
activate and deactivate the Voice
control system* help screen
start Voice control system*
individualization
adjust display settings (page 187)
reset all settings to the factory settings
(
page 189)You can select the applicable time zone
and daylight saving time settings.
In the System settings menu, press the
Time soft key.
The available time zones are shown.
Push the joystick to g or G to
select the time zone.
Press E.
You can now select the daylight saving
time settings.
Activating the System settings
menu
i
Operation of Voice Control is described
in a separate operating guide.
Selecting the time zone

183 System settings
System settings
Push the joystick to g or G to
select the desired entry.
Daylight Savings Time:
Changes from summer to winter time.
Standard Time:
Changes from winter to summer time.
Press E.
The System settings menu will appear.
The setting is saved.The language affects the menu text
displays and the voice output during route
guidance.
In the System settings menu
(
page 182), press the Lang. soft
key.
The languages list will appear.
OptionSymbol
Time change selected_
Time change not
selected-
Selecting the language

188 System settings
System settings
You can use the following functions:
set the display dimming characteristics
adjust the display brightness
Setting the display dimming
characteristics
Push the joystick to G or g to
select an entry.
Day mode
The display is continuously set to
daylight design.
Night mode
The display is continuously set to night-
time design.
Automatic
The display changes depending on the
ambient light sensor in the vehicle.
Press E.
The setting is applied. The System
settings menu will appear.
Adjusting the display brightness
Press the Bright. soft key.
Push the joystick to H or h
direction to adjust the brightness.
or
Press the Bright. soft key longer than
2 seconds.The display brightness changes
gradually. When the slider reaches the
end of the left or right border, it starts
moving into the opposite direction.
Release the Bright. soft key when
the desired brightness is reached.
Confirming the setting
Press the Back soft key.
or
Press E.
The brightness setting is applied.

189 System settings
System settings
In the System settings menu, press the
Reset soft key.
The Reset inquiry menu will appear.
No
is highlighted.If you do not wish to reset to the factory
settings
Press the Back soft key or press E.
The System settings menu will appear.
Accepting the factory settings
Push the joystick to H or h
direction to select
Yes.
Press E.
The inquiry
Do you really want to
reset?
will appear.
Select Yes.
The message
All data has been
reset.
COMAND will now
restart.
will appear.
Resetting all settings to the factory
settings
i
All your personal data, e.g. Last desti-
nation entries or Radio main menu pre-
set entries, will be deleted.
i
The factory settings are:
Time - Central Time
Language - Instrument cluster
Verification tone - On
Notification tone - On
Display setting - Automatic