manual transmission MERCEDES-BENZ G500 2008 W463 Owner's Manual

163
Controls in detail
Automatic transmission
Shifting procedure
The automatic transmission selects indi-
vidual gears automatically, depending on:

gear selector lever position
D
(
page 164) with gear ranges
(
page 167)

transfer case position ( HIGH or LOW )
(
page 170)

the position of the accelerator pedal
(
page 166)

the vehicle speed When the gear selector lever is in drive
position
D, you can influence transmission
shifting by:

limiting the gear range

changing gears manually
iThe current gear selector lever position P,
R ,N, or D appears in the multifunction display
(
page 164).
Warning!G
It is dangerous to shift the gear selector
lever out of park position P or neutral
position N if the engine spee d is higher than
idle speed. If your foot is not firmly on the
brake pedal, the vehicle could accelerate
quickly forward or reverse. You could lose
control of the vehicle and hit someone or
something. Only shift into gear when the
engine is idling normally a n d w h e n y o u r r i g h t
foot is firmly on the brake pedal.
!Allow engine to warm up under low load use.
Do not place full load on the engine until the
operating temperature has been reached.
Shift into reverse gear R or park position P only
when the vehicle is stopped.
W463.boo Seite 163 Montag, 19 . November 2007 8:41 08

239
Controls in detail
Useful features
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate “training”
button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn” or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s manual. Step 9:
Press the “training” button on the
garage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the
following steps.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the
programmed signal transmitter button
( 2 ,3 ,or 4).
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a
second time to complete the training
process. Step 12:
Confirm the garage door operation by
pressing the programmed signal
transmitter button (
2,3 ,or 4).
Step 13:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Gate operator/Can adian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
iSome garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to
complete the training process.
W463.boo Seite 239 Montag, 19 . November 2007 8:41 08

437
Index
G
Garage door opener 32, 236
Gasoline see Fuel
Gasoline additives 425
GAWR 305
Gear range Automatic transmission 167
Shifting into optimal 169
Transfer case 170
Gear range limit Canceling 169
Gear selector lever 27, 162, 371 Cleaning 321
Lock 54
Position 164
Position (automatic transmission) 27, 163
Unlocking manually 371
Global Locking 102
Unlocking 102
Glove box 25, 215 Closing 215
Locking and unlocking separately 216
Opening 215 Good visibility 177
Gross Axle Weight Rating see GAWR
Gross Trailer Weight see GTW
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GTW 305
GVW 305
GVWR 305
H
Hard plastic trim items, cleaning 321
Hazard warning flasher 124
Switching off 124
Switching on 124
Head restraints 108 Power seats 43
Headlamp cleaning system 275
Headlamps Automatic control 118
Cleaning 318
Cleaning system 177, 275
Switching off 64
Switching on 56
Washer fluid 428
Washer system 428
Headlight switch-off delay see Delayed switch-off, exterior lamps Headliner
Cleaning 321
Heated seats 112
Heated steering wheel 225
Height adjustment Head restraints 43
Seat belt outlet 52
Steering wheel 44
High beam flasher 57, 122
High beam headlamps Messages in display 353
Replacing bulbs 376
Switching on 122
High mounted brake lamp 376 Message in display 352
Hood 267 Closing 269
Message in display 351
Opening 267
Hydroplaning 249
I
Identification labels 410 Certification label 410
Ignition Switching on 54
Ignition (Position in starter switch) 39
W463.boo Seite 437 Montag, 19 . November 2007 8:41 08

438 Index
Immobilizer 95Activating 95
Deactivating 95
Infant and child restraint systems 78 Installing 83
LATCH child seat anchors 82
Information button see Tele Aid
Inside rear view mirror Auto-dimming 177
Installing Cargo compartment cover blind 214
Infant and child restraint systems 83
Wiper blades 387
Instructions Loading 208
Instrument cluster 26, 130 Coolant temperature gauge 131
Digital speedometer 140
Illumination 130
Lamps in 324–332
Multifunction display 133
Outside temperature 140
Outside temperature indicator 132
Selecting language 149
Instrument lighting 130
Instruments and controls see Cockpit Interior lighting
Automatic operation 125
Delayed shut-off 154
Manual operation 126
Interior lighting, front 125
Interior lighting, rear 126
Interior rear view mirror Adjusting 46
Intermittent wipe 60 Activating 60
Deactivating 60
Intermittent wiping 59
J
Jack 365
Jump starting 397 K
Key
Messages in display 351
Key, mechanical 368
Key, SmartKey Battery check lamp 102
Checking the batteries 103
Factory setting 102
Global locking 102
Global unlocking 102
Loss of 103
Positions in starter switch 39
Remote control 100
Restoring to factory setting 103
Selective setting 102
Starting the engine 54
Unlocking with 38
Keys 100
Kickdown (Automatic transmission) 166
Kilometers/miles in speedometer 149
Kilopascal 305
Km/h or mph in speedometer 149
L
Labels, identification 410
Lamp bulbs, exterior 375
Lamp in center console 335
W463.boo Seite 438 Montag, 19 . November 2007 8:41 08

450 Index
Transfer case 170Gear range 170
Messages in display 361
Messages in the multifunction display 172
Switching 170
Transfer case differential lock Switching on 175
Transmission see Automatic transmission
Tread 307
Tread depth 279
Tread depth (tires) 309
Treadwear indicators 307
Trip computer 157
Trip odometer Resetting 131
Trunk see Cargo compartment
Turn signal lamps Messages in display 356–357
Replacing bulbs 376
Turn signals 25, 57 Additional in mirrors 376
Cleaning lenses 318
Front bulbs 376
Indicator lamps 27
Rear bulbs 376 Turning off
Engine 64
TWR 307
U
Uniform Tire Quality Grading Standards 307
Units Setting speedometer units 149
Unlocking 38, 100 Driver’s door in an emergency 368
Fuel filler flap 264
Gear selector lever manually 371
Global 102
In an emergency 368
Selective setting 102
Tailgate in an emergency 369
With the SmartKey 38
Uphill driving Cruise control 198
Upholstery Cleaning 322 Useful features 215
Ashtrays 220
Cigarette lighter 222
Electrical outlets 223
Floormats 224
Storage compartments 215
V
Vehicle Data recording 20
Individual settings 146, 148
Lifting 389
Locking 30
Locking in an emergency 369
Lowering 392
Service battery 394
Towing 399
Unlocking 30
Unlocking in an emergency 368
Vehicle battery 394
Vehicle care 314 Engine cleaning 316
Gear selector lever 321
Headlamps 318
Leather upholstery 322
Light alloy wheels 320
Ornamental moldings 317
W463.boo Seite 450 Montag, 19 . November 2007 8:41 08