glove box MERCEDES-BENZ GL-Class 2010 W463 Comand Manual

XTo select an option: Select Media
Interface in the basic display.
The option list appears. A R dot indicates
the option selected.XSelect an option.
Audio Aux
An external audio source (Aux) can be
connected to COMAND via the 1/8 inch jack
1 located inside the glovebox.
Switching to Audio Aux Mode
From Another Main Function
XSelect Audio£Audio £Aux in the audio
menu display.
i If the last mode was audio Aux mode, you
only need to select Audio.
Within the Audio Function
XSelect Audio£Aux .
The Audio Aux menu appears. The medium
in the external audio source is heard,
provided it is connected and switched to
playback.
i Please see the corresponding operating
instructions on how to operate the external
audio source.
External audio sources may have different
signal levels. You can choose between two
different input gain levels for the Aux input.
R Standard
To be used for external audio sources with
a medium to high signal level.
R Boost
To be used for external audio sources with
a low signal level.
XTo set the desired input gain level:
Select Volume £Standard or Boost .
You can set the following sound properties in
audio Aux mode:
R Volume ( Y page 32)
R Balance and fader ( Y page 33)
R Treble and bass ( Y page 32)
R Surround sound ( Y page 33)
Audio Aux151AudioZ

The way you can control the actions depends
on the DVD.
Video Aux
Aux Connectors
An external video source (Video Aux) can be
connected to COMAND via the Media
Interface ( Y page 146) 1/8 inch jack located
inside the glovebox.
Switching to Video Aux
From Another Main Function
XSelect Video£Video £Video Aux
i
If Video Aux mode was active last, you
only need to select Video.
Within the Video Function
XSelect Video£Video Aux
The Video Aux menu appears. The medium
in the external video source is played,
provided it is connected and switched to
playback.
i Please refer to the relevant operating
guide for operation of the external video
source.
External video sources may have different
audio signal levels. You can choose between
two different input gain levels for the Aux
input.
R Standard
To be used for external sources with a
medium to high audio signal level.
R Boost
To be used for external sources with a low
audio signal level.
XTo set the desired input gain level:
Select Volume £Standard or Boost .
Video Aux Settings
The following settings can be made in Video
Aux mode:
R Volume ( Y page 32)
R Balance and fader ( Y page 33)
Video Aux161VideoZ