mirror controls MERCEDES-BENZ GL320CDI 2007 X164 User Guide

214 Controls in detail
Good visibility
Glare through a side window
1Sun visor
2Additional sun visor*
Swing sun visor1 down.
Disengage sun visor1 from
mounting7 (
page 213).
Pivot sun visor1 to the side.
Adjust sun visor1 by pushing or pull-
ing in the direction of arrows.
Swing down additional sun visor*2
when you experience additional glare
through the windshield.
Rear panorama roof sunshade
The rear panorama roof sunshade over the
third-row seats prevents the sun from shin-
ing directly into the vehicle.
You can open and close the sunshade by
hand.1Mounting
2Clip
3Handle
4Button
Closing
Grasp on handle3 and insert clips2
into mounting1.
The third-row sunshade engages.
Opening
Press on button4 to disengage the
third-row sunshade from mounting1.
!To avoid damage to vanity mirror cover4
(
page 213), make sure it is closed before
pivoting sun visor1 to the side.
!Always guide the sunshade. Do not let it
snap back abruptly, as it could be damaged.

296 Controls in detail
Driving systems
The rear view camera is an optical parking
aid. It shows you the area behind the vehi-
cle in the COMAND system display when
reverse gearR is engaged, for example
during parallel parking.
The rear view camera is located near the
tailgate handle.
1Rear view cameraSwitching the rear view camera on and
off
Switch on the ignition (page 42).
Shift the automatic transmission in
positionR (
page 194).
The area behind the vehicle appears in
the COMAND system display.
Shift the automatic transmission
intoP,N orD to switch off the rear
view camera.
iThe area behind the vehicle is shown in the
COMAND system display as a mirror image, like
in the rear view mirror.
iThe image from the rear view camera will no
longer be displayed if you select another
function on the COMAND system while reverse
gearR is engaged. To display the image again,
disengage and reengage reverse gearR.

334 Controls in detail
Useful features
Emergency calls
An emergency call is initiated automatical-
ly following an accident in which the emer-
gency tensioning devices (ETDs) or
air bags deploy.
An emergency call can also be initiated
manually by opening the cover next to the
interior rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. See (
page 335) for
instructions on initiating an emergency call
manually.Once the emergency call is in progress, the
indicator lamp on the SOS button will
begin to flash. The message
Connecting call appears in the multifunc-
tion display. When the connection is estab-
lished, the message
Call connected
appears in the multifunction display. All in-
formation relevant to the emergency, such
as the location of the vehicle (determined
by the GPS satellite location system), vehi-
cle model, identification number and color
are generated.
A voice connection between the Response
Center and the occupants of the vehicle
will be established automatically soon af-
ter the emergency call has been initiated.
The Response Center will attempt to
determine more precisely the nature of the
accident provided they can speak to an
occupant of the vehicle.The Tele Aid system is available if

it has been activated and is operation-
al. Activation requires a subscription
for monitoring services, connection
and cellular air time

vehicle battery power is available

the relevant cellular phone network
and GPS signals are available and pass
the information on to the Response
Center
iLocation of the vehicle on a map is only pos-
sible if the vehicle is able to receive signals from
the GPS satellite network and pass the informa-
tion on to the Response Center.

340 Controls in detail
Useful features
Interior rear view mirror with integrated
remote control
1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control but-
tonProgramming the integrated remote
control
Step 1:
Switch on the ignition (page 42).
Warning!G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
– signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.
When programming a garage door opener,
park the vehicle outside the garage.
Do not run the engine while programming
the integrated remote control. Inhalation of
exhaust gas is hazardous to your health.
All exhaust gas contains carbon monoxide
(CO), and inhaling it can cause unconscious-
ness and possible death.

579 Index
Instruments and controls see Cockpit
Interior lighting 151
Delayed shut-off 180
Interior rear view mirror 52
Antiglare positions 210
Auto-dimming mirrors* 211
Interior storage spaces see
Storage compartments
Intermittent wiping
Windshield wipers 64
J
Jack 496, 497
Lifting the vehicle 524
Jump starting 538
K
Key, Mechanical 500
Key, SmartKey 114
Batteries 122, 506
Battery check lamp 114
Checking battery condition 122
Closing the power windows
(Convenience closing feature) 252
Closing the tilt/sliding sunroof*
(Convenience closing feature) 252Closing, Power tailgate* 128
Factory setting 116
Locking/unlocking 40, 71, 114
Locking/unlocking, Global
setting 116
Loss of 122
Messages in the
multifunction display 480
Opening the power windows
(Summer opening feature) 251
Opening the tilt/sliding sunroof*
(Summer opening feature) 251
Remote control 114
Replacing batteries 506
Selective setting 116
Starter switch positions 42
Starting the engine 57
Turning off the engine 70
Key, SmartKey with KEYLESS-GO*
Batteries 122, 506
Battery check lamp 117
Checking battery condition 122
Closing the power windows
(Convenience closing feature) 252Closing the tilt/sliding sunroof*
(Convenience closing feature) 252
Closing/locking, Power
tailgate* 129
Factory setting 120
Important notes 119
Locking/unlocking 41, 71, 117
Locking/unlocking, Global
setting 120
Loss of 122
Messages in the
multifunction display 479, 480
Opening the power windows
(Summer opening feature) 251
Opening the tilt/sliding sunroof*
(Summer opening feature) 251
Remote control 117
Replacing batteries 506
Selective setting 121
Start/stop button 43
Starter switch positions 42, 43
Starting the engine 59
Turning off the engine 70