MERCEDES-BENZ GLC COUPE 2022 Owners Manual

obser
vethe no tes on cold tyres
(/ page 365).
% The values displa yed in the on-board com-
puter may deviate from those of the tyre pres-
sure gauge as they referto sea le vel.At high
ele vations, the tyre pressure values indicated
by a pressure gauge are higher than those
shown bythe on-board computer. In this case,
do not reduce the tyre pressure.
R
R est
est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e monit
e monit or
oring syst
ing syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating status on all of
th e wheels (/ page 365).
Re start the tyre pressure monitoring system in the
fo llowing situations:
R The tyre pressure has changed.
R The wheels or tyres ha vebeen changed or
ne wly /tted. On-board computer:
4 Service 5
Tyres #
Swipe down wards on Touch Control on the
leT-hand side of the steering wheel.
The Use current tyre pressures as new refer-
ence values? message is shown in the multi-
function displa y. #
Torestart, press Touch Control on the leT-
hand side of the steering wheel.
The Tyre press. monitor restarted message is
shown in the multifunction displa y.
Cur rent wa rning message s are deleted and
th eye llow h warning lamp goes out.
ATer you ha vebeen driving for a few minutes,
th e system checks whe ther the cur rent tyre
pressures are within the speci/ed range. The
cur rent tyre pressures are then accep ted as
re fere nce values and monitored.
Be sure toalso pay attention tothefo llowing rela-
te dto pic:
R Notes on tyre pressure (/ page 365) T
T
yr
yr e pr
e pr essur
essur e loss w
e loss w ar
arning syst
ning syst em
em F
F
unction of t
unction of t he tyr
he tyre pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em
em
The tyre pressure loss warning system warnsthe
driver bymeans of display messages when there
is a se vere tyre pressure loss.
Syst
Syst em limits
em limits
The system may be impaired or may not function
particula rly in thefo llowing situations:
R incor rect refere nce values were ta ught in
R sudden pressure loss caused byafo re ign
object penetrating the tyre, forex ample
R aneven pressure loss on more than one tyre
occurs
The system has a restric ted or dela yed function
particular lyin thefo llowing situations:
R poor ground conditions, e.g. snow or grav el
R driving with snow chains
R when adopting a very sporty driving st yle with
high cornering speeds or sudden acceleration
R driving with a very heavy or lar getrailer
R driving with a high load 368
368
Wheels and tyres

The tyre pressure loss
warning system is only an
aid. It is the driver's responsibility toset the tyre
pressure tothere commended cold tyre pressure
suitable forth e operating situation and tocheck
it.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 365)
R Displ aymessages about the tyres
(/ page 460)
R
R est est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating condition on
each of thefo ur wheels (/ page 365).
Re start the tyre pressure loss warning system in
th efo llowing situations:
R The tyre pressure has changed.
R The wheels or tyres ha vebeen changed or
ne wly /tted. On-board computer:
4 Service 5
Tyres #
Swipe down wards on Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator active Restart: press
Touch Control message is shown in the multifunc-
tion display #
Toinitiate a restart, press Touch Control on
th e leT-hand side of the steering wheel.
The Tyre pressure now OK? message is
shown in the multifunction displa y. #
Select Yes. #
Tocon/rm restart, press Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator restarted message is
shown in the multifunction displa y.
Be su retoalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 365) Wheel c
Wheel c
hange
hange N
No
ot
tes on selecting,
es on selecting, /tting
/ttingand r
and replacing tyr
eplacing tyr es
es *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of accident due toincor-
re ct wheel and tyre dimensions
If wheels and tyres of the wrong size are /t ted,
th e service brakes or components in the brake
system and in the wheel suspension may be
damaged. #
Alwaysre place wheels and tyres with
th ose that ful/l the speci/cations of the
original part.
Fo r wheels, pay attention tothefo llowing:
R Designation
R Type Wheels and tyres
369
369

Fo
r tyres, pay attention tothefo llowing:
R Designation
R Manufacturer
R Type &
W
WARNING
ARNING Risk of inju rythro ugh exceed-
ing the speci/ed tyre load-bearing capa-
city or the permissible speed rating
Exceeding the load-bearing capacity of the
tyres can lead totyre damage and could cause
th e tyres toexplode. #
Therefore, only use tyre types and sizes
appr ovedfo ryo ur vehicle model. #
Obser vethe tyre load-bearing capacity
ra ting and speed rating requ ired foryo ur
ve hicle. *
N NOOTE
TE Vehicle and tyre damage caused by
non-appro ved tyre types and sizes Fo
r saf etyre asons, only use tyres, wheels and
accessories which ha vebeen specially
appr oved byMercedes-Benz foryo ur vehicle.
These tyres are special lyadap tedto the active
saf ety sy stems, su chas ABS, ESP ®
and
4MATIC, and mar ked as follo ws:
R MO = Mercedes-Benz Original
R MOE = Mercedes-Benz Original Ex tended
(run-0at tyres only for cer tain wheels)
R MO1 = Mercedes-Benz Original (only cer-
ta in AMG tyres)
Otherwise, cer tain properties, such as han-
dling characteristics, vehicle noise emissions,
consu mption, etc. could be adversely a.ec-
te d. Furthermore, other tyre sizes could result
in the tyres rubbing against the body and axle
components when loaded. This could result in
damage tothe tyre or theve hicle. Only use tyres, wheels and accessories
that
ha ve been checked and recommended by
Mercedes-Benz. *
N
NOOTE
TE Risk todriving saf ety from retrea-
ded tyres Re
treaded tyres are neither tested nor recom-
mended byMercedes-Benz, since pr evious
damage cannot alw ays be de tected on retrea-
ded tyres.
Fo rth is reason driving saf ety cann otbe guar-
anteed. #
Do not use used tyres if you ha veno
information about their pr evious usage. *
N NOOTE
TE Possible wheel and tyre damage
when driving over obstacles Lar
gewheels ha vea smaller section width. As
th e section width decreases, therisk of
wheels and tyres being damaged when driving
ov er obstacles increases. 370 370
Wheels and tyres

#
Avoid obstacles or drive especially care-
full y. #
Reduce your speed when driving over
ke rbs, speed bumps, manhole co vers
and po tholes. #
Avoid particular lyhigh kerbs. *
N
NO OTE
TE Possible wheel and tyre damage
when parking on kerbs or in po tholes Pa
rking on kerbs or in po tholes can damage
th e wheels and tyres. #
Only park on le vel sur faces if possible. #
Avoid kerbs and po tholes when parking. *
N
NO OTE
TE Damage toelectronic component
parts due tothe use of ty re-/tting tools V
V
ehicles wit
ehicles wit h tyr
h tyr e pr
e pressur
essur e monit
e monit or
or ing sy
ing sy s-
s-
t
t em:
em: there are electronic component parts in
th e wheel.
If ty re-/tting tools are positioned in the area of
th eva lve, the electronic components could be
damaged. #
Tyre-/tting tools should not be applied in
th e area of theva lve. #
Always ha vetyres changed at a quali/ed
specialist workshop. *
N
NOOTE
TE Damage tosummer tyres at low
ambient temp eratures At
low ambient temp eratures, tears could form
when driving with summer tyres, causing per-
manent damage tothe tyre. #
Attemp eratures below 7 °C use i
M+S tyres. Ac
cessory parts which are not appr oved foryo ur
ve hicle byMercedes-Benz, or which are not used
cor rectl y,can impair the operating saf ety.
Before purchasing and using non-appro ved acces-
sories, visit a quali/ed specialist workshop and
enquire about:
R Suitability
R Legal stipulations
R Factory recommendations &
W WARNING
ARNING Risk of accident with high per-
fo rm ance tyres
The special tyre tread in combination with the
optimised tyre compound means that therisk
of skidding and hydroplaning on wetro ads is
increased.
In addition, the tyre grip is greatly reduced at
a low outside temp erature and tyre running
te mp erature. #
Switch on the ESP ®
and adapt your driv-
ing style accordingl y. #
Use i M+S tyres at outside temp era-
tures of less than 10 °C. #
Only use the tyres forth eir intended pur-
pose. Obser
vethefo llowing when selecting, /tting and
re placing tyres:
R Countr y-speci/c requ irements for tyre
appr oval that de/ne a speci/c tyre type for
yo ur vehicle. Wheels and tyres
371 371

R
Furthermore, the use of cer tain tyre types in
cer tain regions and areas of operation can be
high lybene/cial.
R Only use tyres and wheels of the same type
(summer tyres, winter tyres, MOExtended
tyres) and the same make.
R Only /t wheels of the same size on one axle
(leT and right).
It is only permissible to/t a di.e rent wheel
size in theev ent of a 0at tyre in order todrive
to the specialist workshop.
R Do not make any modi/cations tothe brake
system, the wheels or the tyres.
The use of shims or brake dust shields is not
permitted and may in validate theve hicle's
ge neral ope rating permit.
R V
V ehicles wit
ehicles wit h a tyr h a tyre pr
e pressur
essur e monit
e monit or
or ing sy
ing sy s-
s-
t
t em:
em: all /t tedwheels must be equipped with
functioning sensors forth e tyre pressure mon-
itoring system.
R Attemp eratures below 7 °C use winter tyres
or all-season tyres mar kedi M+Sfor all
wheels. Wi
nter tyres pr ovide the best possible grip in
wintry road conditions.
R For M+S tyres, only use tyres with the same
tread.
R Obser vethe maximum permissible speed for
th e M+S tyres /t ted.
If th e tyre's maximum speed is below that of
th eve hicle, this must be indicated byan
appropriate label in the driver's /eld of vision.
R Run in new tyres at moderate speeds forthe
/r st 100 km.
R Replace the tyres aTer six years at the latest,
re ga rdless of wear.
R When r
When r eplacing wit
eplacing wit h tyr
h tyres t
es that do no
hat do no t f
t featur
eatur e
e
r
r un-0at
un-0at c
char
har act
act er
er is
istics:
tics: vehicles with
MOExtended tyres are not equipped with a
TIREFIT kit at thefa ctor y.Equip theve hicle
with a TIREFIT kit aTer replacing with tyres
th at do not feature run-0at characteristics,
e.g. winter tyres.
% You can permanently limit the maximum
speed for driving with winter tyres
(/ page 224). Fo
r more information on wheels and tyres, con-
ta ct a quali/ed specialist workshop.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 365)
R Tyre pressure table (/ page 366)
R Notes on the emer gency spa rewheel
(/ page 379) N
No
ot
tes on int
es on int erc
erchanging wheels
hanging wheels &
W
WARNING
ARNING Risk of injury thro ugh di.erent
wheel sizes
Inter changing the front and rear wheels can
se verely impair the driving characteristics.
The disk brakes or wheel suspension compo-
nents may also be damaged. #
Only inter change the front and rear
wheels if the wheels and tyres ha vethe
same dimensions. 372
372
Wheels and tyres

Inter
changing the front and rear wheels if the
wheels or tyres ha vedi.erent dimensions can
re nder thege neral ope rating permit in valid.
Obser vethe inst ructions and saf ety no tes on
"Changing a wheel" (/ page 369)
The wear patterns on the front and rear wheels
di.er:
R front wheels wear more on the tyre shoulder
R rear wheels wear more in the centre of the
tyre
Do not drive with tyres that ha vetoo little tread
dep th. This signi/cantly reduces traction on wet
ro ads (aquaplaning).
On vehicles with the same front and rear wheel
size, you can inter change the wheels every
5,000 to10,000 km, depending on thewe ar.
Ensu rethe direction of rotation is maintained for
th e wheels. N
No
ot
tes on st
es on st or
oring wheels
ing wheels When storing wheels, obser
vethefo llowing no tes:
R ATer removing wheels, store them in a cool,
dry and preferably dark place.
R Protect the tyres from contact with oil, grease
or fuel. Ov
Ov
er
ervie
vie w of t
w of t he tyr
he tyr e-c
e-chang
hang e t
e tool kit
ool kit *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. Apart from some countr
y-speci/c variants, vehi-
cles are not equipped with a tyre-change tool kit.
Fo r more information on which tyre-changing
to ols are requ ired and appr ovedfo r per form ing a
wheel change on your vehicle, consult a quali/ed
specialist workshop.
Yo ure qu ire thefo llowing tools, fore xamp le,to
ch ange a wheel:
R Jack R
Chock
R Wheel wrench
R Centring pin
% The jack weighs appr oximately 3.4 kg.
The maximum load capacity of the jack can
be found on the stic ker a1xed tothe jac k.
The jack is maintenance-free. If there is a
malfunction, please contact a quali/ed spe-
cialist workshop.
The tyre-change tool kit is located under the load
compartment 0oor.
% Depending on the model, the tyre change tool
kit may be located in other positions under
th e load compartment 0oor. Wheels and tyres
373
373

1
Jack
2 Ratchet for jack
3 Wheel wrench
4 Folding chock
5 Centring pin
6 Socket wrench forra tchet Pr
Pr
epar
epar ing t
ing the v
he vehicle f
ehicle f or a wheel c
or a wheel c hange
hange R R
eq eq uir
uir ements:
ements:
R The vehicle is not on a slope.
R The vehicle is on solid, non-slippery and le vel
gr ound.
R The requ ired tyre-change tool kit is available.
% Ifyo ur vehicle is not equipped with the tyre-
ch ange tool kit, consult a quali/ed specialist
wo rkshop to/nd out about sui table tools. #
Apply the electric parking brake manuall y. #
Movethe front wheels tothe straight-ahead
position. #
ShiT the transmission toposition j. #
V
V ehicles wit
ehicles wit h lev
h level contr
el contr ol syst
ol system:
em:setthe nor-
mal vehicle le vel (/ page 246). #
Switch o. theve hicle. #
Make sure that theve hicle cann otbe star ted. #
Place choc ks orother suitable items under the
front and rear of the wheel that is diagonal ly
opposite the wheel you wish tochange. #
If necessar y,remo vethe wheel trim/hub caps
(/ page 374). #
Raise theve hicle (/ page 375). R
R
emo
emo ving and
ving and /tting
/ttingt
the wheel tr
he wheel tr im/hub caps
im/hub caps R
R
eq
eq uir
uir ements:
ements:
R The vehicle is prepared for a wheel change
(/ page 374).
Plas
Plas tic hub cap
tic hub cap #
T
To r
o r emov
emov e:
e:turn the centre co ver of the hub
cap anti-clockwise and remo vethe hub cap. #
T
To
o /t:
/t: make sure that the centre co ver of the
hub cap is turned anti-clockwise. #
Position the hub cap and turn the centre co ver
clockwise until the hub cap engages ph ysically
and audibl y. 374
374
Wheels and tyres

Aluminium hub cap
Aluminium hub cap
#
T
To r
o r emov
emov e:
e:position soc ket2 from the tyre-
ch ange tool kit on hub cap 1. #
Position wheel spanner 3on soc ket2. #
Using wheel spanner 3, turn hub cap1
anti-clockwise and remo veit. #
T To o /t:
/t: follow the inst ructions abo veinreve rse
order.
% Speci/ed Speci/ed tight tightening t
ening t orq
orque:ue: 25 Nm. R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheel R R
eq eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (/ page 374).
Impor tant no tes on using the jack:
R Use only a vehicle-speci/c jack that has been
appr ovedby Mercedes-Benz toraise theve hi-
cle.
R The jack is only designed forra ising and hold-
ing theve hicle for a short time while a wheel
is being changed and not for maintenance
wo rkunder theve hicle.
R The jack must be placed on a /rm, 0at and
non-slip sur face. If necessar y,use a lar ge, 0at,
load-bearing, non-slip underla y.
R The foot ofthe jack must be positioned verti-
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands or feet under theve hi-
cle.
R Never lie under theve hicle. Wheels and tyres
375
375

R
Do not start theve hicle and do not release the
electric parking brake.
R Do not open or close any doors or theta ilgate. #
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe
scr ews comple tely. Po
sition of the jack support points
* N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of injury from incor rect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip wi th theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of th
e jack must be positioned vertically
under the jacking point of theve hicle. *
N
NOOTE
TE Damage totheve hicle due tothe
jack If
yo u do not position the jack at the jack sup-
port points pr ovided forth is purpose, you
could damage your vehicle. #
Only position the jack at the jack sup-
port points pr ovided forth is purpose. #
Take thera tchet out of the tyre-change tool kit
and place it on the he xagon nut of the jack so
th at the letters "AUF" are visible. 376
376
Wheels and tyres

#
Position support 2of jack 4on jack sup-
port point 1. #
Turn ratchet 3clockwise until support 2
sits comple tely on jack support point 1and
th e base of the jack lies evenly on thegr ound. #
Turn ratchet 3until the tyre is raised a maxi-
mum of 3 cm from thegr ound. #
Loosen and remo vethe wheel (/ page 377). R
R
emo
emo ving a wheel
ving a wheel R R
eq
eq uir uir ements:
ements:
R The vehicle is raised (/ page 375).
* NO
NOTE
TEMercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. When
changing a wheel, avoid applying any force
to the brake discs, since this could impair the
le ve l of comfort when braking.
* N
NOOTE
TE Damage tothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe uppermost wheel bolt com-
ple tely. #
Screw cent ring pin 1into theth re ad ins tead
of the wheel bolt. #
Unscr ewthere maining wheel bolts com-
ple tely. #
Remo vethe wheel. F F
itting a ne
itting a ne w wheel
w wheel R
R
eq
eq uir
uir ements:
ements:
R The wheel tobe changed is remo ved and the
cent ring pin is sc rewe d in (/ page 377). Wheels and tyres
377
377