MERCEDES-BENZ GLE COUPE 2019 Owners Manual

Engine oil
Note
s on engine oil
Obser vethe no tes on operating fluids
(/ page 562). *
NO
TEEngine dama gecaused byan
incor rect oil filter, incor rect oil or addi‐
tives #
Do not use engine oils or oil filters
which do not cor respond tothe specifi‐
cations explicitly prescribed forthe
service inter vals. #
Do not alter the engine oil or oil filter in
order toachie velonger change inter vals
th an presc ribed. #
Do not use additives. #
Have the engine oil rene we d at regular
inter vals. Mercedes-Benz
recommends that you ha vethe
oil change car ried out at a qualified specialist
wo rkshop.
Only Mercedes-Benz appr oved engine oils may
be used in Mercedes-Benz engines.
Fu rther information on engine oil and oil filters is
av ailable at thefo llowing locations:
R inthe Mercedes-Benz Specifications for
Operating Fluids byentering the designation
- at http://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo app
R at a qualified specialist workshop
Pet rol engines: for cer tain countries, dif fere nt
engine oils can be used in conjunction wi th
re duced maintenance inter vals. %
Further information on dif fere nt engine oils
can be ob tained at a qualified specialist
wo rkshop.
Quality and capacity of engine oil
Missing values werenot available at the time of
going topress.
MB- Freigabe or MB -Appr oval Pe
trol engine sE ngine oil specifica‐
tions
All models MB-Fr
eigabe or MB -Appr oval Diesel engine
sEngine oil specifica‐
tions
All models %
Ifth e engine oils lis ted in theta ble are not
av ailable, you may add a maximum of
1. 0 litr e ofthefo llowing engine oils once
onl y. 568
Tech nical da ta

Engine oils
for one-time filling only in exceptional
cases:
R petrol engines: MB-Freigabe or MB-Appr oval
R diesel engines:
The following values referto an oil change,
including the oil filter.
Missing values werenot available at the time of
going topress.
Re placement amount Mode
lR eplacement
amount
All models Note
s on brake fluid Obser
vethe no tes on operating fluids
(/ page 562). &
WARNING Risk of an accident due to
va pour poc kets form ing in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake fluid. If the boiling point is too lo w,
va pour poc kets may form inthe brake sys‐
te m when the brakes are applied hard.
This impairs the braking ef fect. #
Have the brake fluid rene we d at the
specified inter vals. Ha
ve the brake fluid regularly replaced at a
qu alified specialist workshop.
Only use brake fluid appr ovedby Mercedes-Benz
according toMB-F reigabe or MB-Appr oval 33 1.0.
Yo u can obtain fur ther information on brake fluid
in thefo llowing places:
R inthe Mercedes-Benz Specifications for
Operating Fluids
- at http://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo App
R at a qualified specialist workshop Coolant
Note
s on coolant
Obser vethe no tes on operating fluids
(/ page 562). &
WARNING Risk offire ‑ and inju ryfrom
antifreeze
If antifreeze comes into contact with hot
component parts in the engine compart‐
ment, it may ignite. #
Allow the engine tocool down before
yo uto p up the antif reeze. #
Make sure that no antifreeze spills out
next tothefiller opening. #
Thoroughly clean the antif reeze from
component parts before starting the
ve hicle. Te
ch nical da ta569

*
NO
TEDama gecaused byincor rect cool‐
ant #
Only add coolant that has been pre‐
mixed with therequ ired antifreeze pro‐
te ction.
Information on coolant is available at thefo l‐
lowing locations:
R inthe Mercedes-Benz Specification for
Operating Fluids 310.1
- at http://be vo.mercedes-benz.com
- inthe Mercedes-Benz BeVo app
R at a qualified specialist workshop *
NO
TEOverheating at high outside tem‐
peratures If an inapp
ropriate coolant is used, the
engine cooling sy stem is not suf ficiently pro‐
te cted against overheating and cor rosion at
high outside temp eratures. #
Alw ays use coolant appr ovedby
Mercedes-Benz. #
Obser vethe instructions in the
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1. Ha
ve the coolant regularly replaced at a qualified
specialist workshop.
The proportion of cor rosion inhibitor/antifreeze
concentrate in the engine cooling sy stem should
be:
R a minimum of 50% (antifreeze pr otection
down toappr oximately -37 °C)
R a maximum of 55% (antifreeze pr otection
down to-45 °C) Note
s on windscreen washer fluid Obser
vethe no tes on operating fluids
(/ page 562). &
WARNING ‑ Risk of fire and injury due to
windscreen washer concentrate
Wi ndsc reen washer concentrate is highly
fl ammable. It could ignite if it comes into con
tact wi thhot engine component parts or
th eex haust sy stem. #
Make sure that no windsc reen washer
concentrate spills out next tothefiller
opening. *
NO
TEDama getotheex terior lighting
due tounsuitable windsc reen washer
fl uid Uns
uitable windsc reen washer fluids may
damage the plastic sur face of theex terior
lighting. #
Only use windscreen washer fluids
which are also suitable for use on plas‐
tic sur faces, e.g. MB SummerFit or MB
Wi nterFit. *
NO
TEBlocked spr aynozzles caused by
mixing windscreen washer fluids #
Do not mix MB SummerFit and MB Win‐
te rFit with other windscreen washer flu‐
ids. 57 0
Tech nical da ta

Do not use di
stilled or de-ionised water asthefill
le ve l sensor may be triggered er roneously.
Re commended windscreen washer fluid:
R Abo vefreezing point: e.g. MB SummerFit
R Below freezing point: e.g. MB WinterFit
Fo rth e cor rect mixing ratio, referto the informa‐
tion on the antif reeze contai ner.
Mix thewa sher fluid with the windscreen washer
fl uid all year round. Ve
hicle data Ve
hicle dimensions The heights speci
fied may vary as a result of the:
R tyres
R load
R condition of the suspension
R optional equipment Missing
values werenot available at the time of
going topress.
Height when opened 1
1
Height
when
opened* 2
2
Head‐
ro om*
Ve hicles with steel
suspension 23
07 mm 1971 mm
Ve hicles with AIR‐
MATIC 2266 mm
-
2341 mm 19
31 mm
-
2006 mm *When
there ar-end lo wering is acti vated, the
va lues are cor respondingly lo wer.
Ve hicle dimensions All models
Ve
hicle lengt h4 939 mm
Ve hicle length, AMG Styling
Ve hicle width including out‐
side mir rors 21
57 mm
Ve hicle width excluding out‐
side mir rors, min. tomax. 20
10 mm -
20 18 mm
Ve hicle height (s teel suspen‐
sion) 17
30 mm
Maximum vehicle height (AIR‐
MATIC) 17
66 mm
Minimum vehicle height (high‐
wa y driving le vel) 17
16 mm
Wheelbase 2935 mm Te
ch nical da ta571

All models
Maximum ground clearance
(s
te el suspension) 206 mm
Maximum ground clearance
(AIRMATIC) 24
9 mm
Minimum ground clea rance
(AIRMATIC) 17
4 mm We
ights and loads Please no
tethat forth e specified vehicle data:
R Items of optional equipment increase the
unladen weight and reduce the pa yload.
R Vehicle-specific weight information can be
fo und on theve hicle identification plate
(/ page 560).
Ro of load All models
Maximum
roof load 75kg Maximum design speeds
The
following values only apply tovehicles with
th e AMG Driver's Package.
Maximum design speeds Mercedes
-AMG GLE 53
4MATIC+
1st gear 50 km/h
2nd gear 83 km/h
3rd gear 119 km/h
4th gear 164 km/h
5th gear 222 km/h
6th gear 250 km/h
7th gear 250 km/h Mercedes
-AMG GLE 63
4MATIC+
1st gear 54km/h
2nd gear 90 km/h Mercedes
-AMG GLE 63
4MATIC+
3rd gear 129 km/h
4th gear 178 km/h
5th gear 240 km/h
6th gear 250 km/h
7th gear 250 km/h Mercedes
-AMG GLE 63 S
4MATIC+
1st gear 54km/h
2nd gear 90 km/h
3rd gear 129 km/h
4th gear 178 km/h
5th gear 240 km/h
6th gear 250 km/h
7th gear 250 km/h572
Tech nical da ta

Mercedes-AMG GLE 63 S
4MATIC+
8th gear 280 km/h
9th gear 280 km/h Off-
road driving vehicle data Fo
rding dep th
* NO
TEDama gecaused bywate r when
fo rd ing Wa
ter can enter the engine compartment
and vehicle interior in thefo llowing cases:
R the maximum permissible ford ing dep th
when driving thro ugh standing water is
ex ceeded
R a bow wavefo rm s during ford ing
R wate r accumulates during ford ing of flow‐
ing water #
Do not exceed the maximum permissi‐
ble ford ing dep thand drive slowly
th ro ugh thewa ter. The specified
value indicates the maximum per‐
missible ford ing dep thforve hicles that are ready
to drive (fuel tank full, all fluids topped up, driver
in theve hicle) and for slow driving thro ugh
st anding water.
Driving thro ugh flow ing wate rre duces the per‐
missible ford ing dep thdue tothe accumulation
of wate r.
Obser vethe no tes on off-road driving and ford‐
ing (/ page186). Model
1 1Fording
dep th
Ve hicles with steel sus‐
pension 50 cm
Ve hicles with AIRMATIC
Ra ised le vel5 0 cm Angle of approach/departure
The speci
fied values are maximum values for
ve hicles that are ready todrive – fuel tank full,
all fluids topped up, with driver. The values
depend on theve hicle tyres and vehicle weight.
Obser vethe no tes on driving in mountainous ter‐
ra in (/ page186). Te
ch nical da ta573

All models (vehi‐
cles without
AMG
Styling) 1 1
Front 2
2Rear
Ve hicles with
st eel suspen‐
sion* 25°
24 °
Ve hicles with
AIRMATIC*
Normal le vel2 5°24 °
Ra ised le vel2 9°27° All models (vehi‐
cles with AMG
Styl
ing) 1 1
Front 2
2Rear
Ve hicles with
st eel suspen‐
sion* 21
°2 2°
Ve hicles with
AIRMATIC*
Normal le vel2 1°21 °
Ra ised le vel2 4°24 ° *Depending on
the tyre size
Maximum gradient climbing ability
The vehicle's gradient climbing ability depends
on thewe ight distribution in theve hicle, thete r‐
ra in conditions and thero ad sur face conditions.
The specified value applies in thefo llowing
cases:
R theve hicle is ready todrive – fuel tank full,
all fluids topped up, driver in theve hicle R
thero ad sur face conditions and thus traction
are good
A gradient climbing ability of 100% cor responds
to an incline of 45°.
Obse rveth e no tes on driving in mountainous ter‐
ra in (/ page186). Mo
del Maximumgra‐
dient climbing ability
All models 80% Tr
ailer hitch Gene
ral no tes on the trailer hit ch Modifications
tothe engine cooling sy stem may
be necessar y,depending on theve hicle model.
The retrofitting of a trailer hitch is only pe rmissi‐
ble if a towing capacity is specified in your vehi‐
cle documents.
Fu rther information can be obtained at a quali‐
fi ed specialist workshop. 574
Tech nical da ta

Mounting dimensions
1
Fastening points
2 Overhang dimension
3 Rear axle centre line The
overhang dimension and fastening points
are valid for a trailer hitch ins talled at thefa c‐
to ry. Model
2 2Over‐
hang dimen‐ sion
All model s1 161 mm Pe
rm issible trailer load The
tongue weight is not included in theto wing
capacity.
To wing capacity Model
Perm issible towing
capacit y,braked (at
a minimum start-off
gr adeability of 12%)
All models 2700 kg
Ve hicles with AIR‐
MATIC and increased
trailer load 3500
kg Maximum
tongue weight *
NO
TEDama gecaused bythe trailer
coming loose If
th eto ngue weight used is too lo w,the
trailer may come loose. #
The tongue weight must not be below
50 kg. #
Use a tongue weight that is as close as
possible tothe maximum permissible
to ngue weight. To
ngue weight Model
Maximumtongue
we ight
All models 108kg
Ve hicles with AIR‐
MATIC and increased
trailer load 14
0kg Te
ch nical da ta575

Pe
rm issible rear axle load (trailer operation) Missing
values werenot available at the time of
going topress.
Axle load Model
Perm issible rear axle load
during trailer operation
To wing
capacity
27 00 kg To
wing
capacity
3500 kg
All models 576
Tech nical da ta

Display messages
Int
roduction Note
s on display messages
Display messages appear on the multifunction
displa y.
Displ aymessa ges with graphic symbols are sim‐
plified in the Owner's Manual and may dif fer
from the symbols on the multifunction displa y.
The multifunction display sho wshigh-priority dis‐
play messages in red. Cer tain display messages
are accompanied byawa rning tone.
Please act in acco rdance with the display mes‐
sages and follow the additional no tes in the
Owner's Manual.
Fo r some display messa ges, a symbol is also
shown:
R Õ Further information
R ¨ Hide display message
Yo u can select the desired symbol byswiping
left or right on the left-hand Touch Control.
Press theÕ symbol toshow fur ther information on
the multifunction displa y.Press the¨
symbol tohide the display message.
Yo u can hide lo w-priority display messages by
pressing button ¤orthe left-hand Touch
Control. The displ aymessa ges will then be
st ored in the message memor y.
Re ctify the cause of a display message as
qu ickly as possible.
High-priority display messages cannot be hid‐
den. The multifunction display sho ws these dis‐
play messages continuously until the cause of
th e display message has been rectified.
Calling up stored displ aymessages
On-boa rdcompu ter:
4 Service 5
1 message
If th ere are no display messages, No messages
will appear on the multifunction displa y. #
Scroll thro ugh the display messages byswip‐
ing upwards or down wards on the left-hand
To uch Control. #
Toexitth e message memor y:press the
¤ button. Display messages and
warning/indicator lamps 577