ESP MERCEDES-BENZ M-Class 2004 W163 Comand Manual

Welcome to MCS!
Please make yourself familiar with your
MCS control unit and read the instructions
in this manual before operating the MCS
system. This will help you derive a greater
benefit from the system. Please also follow
the instructions and warnings contained in
this manual. Ignoring them could result in
damage to the vehicle or personal injury to
you or others.
Your MCS system may have some or all of
the equipment described in this manual.
Therefore, you may find explanations for
optional equipment not installed in your
vehicle. If you have any questions about
the operation of any equipment, your au-
thorized Mercedes-Benz Center will be
glad to demonstrate the proper proce-
dures. We continuously strive to improve our
product and ask for your understanding
that we reserve the right to make changes
in design and equipment. Therefore, infor-
mation, illustrations and descriptions in
this manual might differ from the equip-
ment installed in your vehicle. As such, the
information, illustrations and descriptions
contained in this manual may not be rea-
sonably relied upon in making any claims
with respect to the actual performance of
the product.
These operating instructions form an inte-
gral part of the vehicle and should there-
fore always be kept inside the vehicle and
passed on to the new owner if the vehicle
is sold.
We extend our best wishes for many miles
of safe, pleasurable driving.
Mercedes-Benz USA, LLC
A DaimlerChrysler Company

7 Introduction
Operating safety

Operating safety
Warning
G
Any alterations made to electronic compo-
nents and the software can cause malfunc-
tions.
The radio, amplifier, CD player*, CD chang-
er*, and telephone* are interconnected.
When one of the components is not opera-
tional or has not been removed/replaced
properly, the function of other components
may be impaired.
This condition might seriously impair the op-
erating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
by an authorized Mercedes-Benz Center.
Warning
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings while the vehicle is at a
standstill and operate the system only when
permitted by road, weather and traffic con-
ditions.
Bear in mind that at a speed of just
30 mph (approximately 50 km/h), your car
is covering a distance of 44 feet (approxi-
mately 14 m) every second.
MCS supplies you with the information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we encour-
age the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the MCS screen to read naviga-
tional maps, instructions, or downloaded in-
formation.
While the navigation system* provides di-
rectional assistance, the driver must remain
focused on safe driving behavior, including
attention to traffic and street signs, and
should utilize the system's audio cues while
driving.
The navigation system* does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. This al-
ways remains your personal responsibility
when you drive. DVD maps do not cover all
areas nor all routes within an area.

14 At a glanceQuick reference MCSThis section only provides a brief overview
of the MCS. Please read all instructions
carefully before operating the unit to en-
sure your complete understanding and to
obtain the best possible performance from
the system.
For detailed information, please refer to
the pages indicated and the respective
system chapters.Switching on

Press the rotary/push-button 1.
or

Turn the key in the steering lock to po-
sition 1 or 2 if the MCS has been
switched off by turning the key in the
steering lock to position 0 or removed.The MCS will switch on the last active
source and display the corresponding
menu.
Switching off

Press the rotary/push-button 1.
or

Turn the key in the steering lock to po-
sition 0.
or

Remove the key.
The MCS switches off.
Switching the MCS operating unit on
and off

34 AudioRadio operationStation selection using the number
keypad (presets)
FM- and AM-Bands
Press one of the number keys, such as
.
The radio tunes to the frequency as-
signed to that memory location. If you
have not saved a station to the memory
location, the radio does not change fre-
quencies.
FWeather Band WB
Tune the radio to the selected channel.
The memory preset number appears in
the status line.Station selection using the direct
frequency entry (FM, AM)

Press .
Input line appears in the main radio
menu.

Use the number keys to enter the de-
sired frequency within 8 seconds, e.g.
for 102.7 FM.
The station you have selected begins to
play.
iFM and AM presets are independent.
You can access them only if you are in
the corresponding band.
Saving stations for FM and AM
(page 36).

58 AudioCD operation
CD changer mode: MAG. EMPTY -
there are no CDs in the magazine. Eject
the CD changer magazine and insert
CDs.

CD changer mode: NO MAGAZINE -
there is no magazine in the CD chang-
er. Insert a loaded magazine into the
CD changer.

CD changer mode: CHANGER ERROR
- have the MCS and the CD changer
checked by an authorized Mercedes-
Benz Center.

Press a number key, e.g. to se-
lect the corresponding CD.
The screen as shown above appears for
4 seconds. The selected CD will be
highlighted. If the selected magazine
slot is empty, the NO CD message and
the number of the selected slot ap-
pears on the screen. The next CD in-
serted will be selected.Playback begins with track 1 of the select-
ed CD.
iIn the CD, radio and tape modes icons
are displayed for an inserted CD (single
CD player) or a connected and loaded
CD changer.
Selecting a CD
MCS with CD changer
iAfter the last track of the current CD
has been played, the next CD inserted in
the magazine is selected and playback
continues with track 1.

85 Telephone*
Telephone* operation
If the system detects an incoming call, the
phone rings and CALL appears on the dis-
play. If the telephone number can be iden-
tified, it appears in the display. The
corresponding name is displayed as long
as it has been stored in the phone book.

Press .
The active audio source switches to
mute.
Switching off the microphone for the
hands-free telephone

Press the softkey MUTE.

Press the softkey MUTE again to cancel
muting.
Setting the volume for hands-free opera-
tion
Raising the volume

Turn the rotary/push-button v to the
right.
Lowering the volume

Turn the rotary/push-button v to the
left.Refusing or ending a call

Press .
The main telephone display disappears
and the previous source is restored.
Accepting an incoming call using the
mobile telephone handset
For the location of your telephone, see the
vehicle’s operation instructions.

Press .

Remove the telephone from its cradle
and conduct your call.
The hands-free operation switches off.
Ending a call

Put the phone back in its cradle.
Incoming call

92 Telephone*Emergency callYou can use a mobile communications net-
work to make an emergency call to an
emergency rescue station.
The emergency call is placed as long as the
corresponding mobile communication net-
work is available. To place an emergency
call, switch the telephone on.
Emergency calls may not be possible with
all mobile phone networks, or if certain
network services and/or telephone func-
tions are active. Check with your local net-
work operating company.Initiating an emergency call

Make sure that the main telephone
menu is displayed.

Press the number key longer
than 2 seconds (quick-dialing).
The telephone begins dialing.
The call time appears when the call is
initiated.
Ending or stopping an emergency call

Press .
iThe emergency call is also placed if the
phone is locked.iThis function places a call to a local 9-1-
1 provider. This function does not ini-
tiate a Tele Aid call.
Warning
G
The 9-1-1 emergency call system is a public
service. Using it without due cause is a crim-
inal offense.!If you press the number key long-
er than 2 seconds, the number stored
in memory location “1” (default is 9-1-
1) is dialed.!It is not possible to complete the emer-
gency call if the cellular system is busy.
The message SYSTEM BUSY appears.
Take appropriate measures to alert an
emergency service as soon as possible.

95 Navigation*
Important notes
Travelling abroad
If you intend to travel through different re-
gions or abroad, you will need the respec-
tive navigation DVD.
Contact your Mercedes-Benz Center or
the Customer Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
for available DVDs.
Change the navigation DVD
(page 98).
iThe CD/DVD drive can read navigation
DVDs and playback audio CDs.
If an audio CD is inserted in the CD/
DVD drive and is pressed, the
message MUSIC CD INSERTED
PLEASE REPLACE WITH A NAV-
IGATION DISC is displayed.
Remove the audio CD and insert a
navigation DVD (
page 98).
!GPS (G
lobal P
ositioning S
ystem) sig-
nals received make it possible to deter-
mine the current vehicle position.
Deviations from the actual position
may occur

If the reception of GPS signals is
disturbed, e.g. in parking garages
and tunnels

If road conditions are poor

If your vehicle has been damaged
The MCS may require some time to
find its exact position after your vehi-
cle has been transported by car, train,
or ferry. Moving the vehicle a few yards
is typically enough to remedy this situ-
ation.

144 Navigation*Settings
Use the joystick to select Guidance
Setup and press .
The Guidance Setup menu appears.

Use the joystick to select
Guidance and press .
The Guidance menu appears.

Use the joystick to select one of the fol-
lowing guidance modes and press .
Hybrid: The basic guidance
screen is displayed during a maneu-
ver. Once the maneuver is com-
plete, the MCS returns to the
detailed map display or the respec-
tive audio display.

Arrow: The Basic Guidance
screen is displayed at all times.

Map: The Detailed Map screen is
displayed at all times.

Use the joystick to save the settings,
select Return and press .






147 Navigation*
Settings

Use the joystick to select one of the fol-
lowing POI modes and press .
Show: The selected POI icons are
shown when you select the detail
map display.

Hide: No POI icons are displayed.

Edit: Allows you to select which
POI icons are displayed.

To save the settings, use the joystick to
select Return and press .
When you move the Present Vehicle Posi-
tion icon to any of the visible POI icons and
press , the name, address, and phone
number respective of the POI icon will be
displayed.Editing POI icons
If you select Edit a list of 6 icons ap-
pears. Use the joystick to select up to 3 of
the following icon types. After selecting
each icon, press .

ATM

Bank

Gas Station

Hotel

Parking

Restaurant and type of restaurantYou can set the map display so that north
is always referenced towards the top of the
display or the Present Vehicle Position icon
is always pointing towards the top of the
screen.

Press .

Use the joystick to select SYSTEM
SETUP and press .
The Setup Select menu appears. Setting map and screen orientation