navigation MERCEDES-BENZ M-Class 2005 W163 Comand Manual

24 At a glanceQuick reference MCSEntering an address number
The input screen appears if you have en-
tered the street name and the address
numbers for this street are stored on the
navigation DVD.
Use the joystick to select the first num-
ber of the desired address number and
press .
The character will appear in the num-
ber window.

To enter more characters, repeat the
above step.

To correct the last character, use the
joystick to select Delete and press
.

When the address number is displayed,
use the joystick to select Done and
press .
If the city name was not previously en-
tered, the City Name menu will appear.

Once you have entered the complete
address, the Confirm Destination menu
appears.

Use the joystick to select OK to
Proceed and press .
The MCS begins calculating the route.



iNumbers can also be entered using the
number keypad.
If a character is not available, it will au-
tomatically be shaded out. Use “N”, “E”,
“W” or “S” only if the address number
contains such a character. The MCS will
automatically differentiate north, east,
west and south street names.




30 AudioRadio operationThis chapter will provide detailed informa-
tion on: 
Radio operation

Tape operation

CD operation* and

Sound adjustments
If you have not done so already, please
familiarize yourself with these functions by
reading the “At a glance” chapter.
Main FM radio menu
Press .
The radio is switched on and the sta-
tion last tuned to will begin to play.

Press any system key, e.g. .
MCS will switch to the tape mode.
Switching radio operation oniYou can operate the telephone and the
navigation system while the radio is on.
Switching another system on

44 AudioTape operationListening to a cassette
To begin tape playback:
Insert a cassette into the cassette
compartment. Tape playback will begin
automatically (
page 40).

Press if a cassette has already
been inserted.The telephone and navigation functions
can be used while a tape is playing.
Switch off tape operation

Eject the cassette, switch to the radio
or CD mode or switch off the MCS.
The following screen messages can appear
after is pressed:

NO TAPE... - no cassette is inserted. In-
sert a cassette.

TAPE ERROR, TAPE MAY BE TOO TIGHT
- the cassette cannot be played. The
tape is too tight or is damaged. The
MCS will switch to the radio mode.
I
Press the softkey SIDE.
The other side of the tape automatical-
ly starts to play. The side selected is
displayed in the main tape menu.
Listening to a cassetteiThe cassette side facing upward is con-
sidered SIDE 1.
Error messages
Changing sidesiWhen the end of the tape has been
reached, the cassette changes sides au-
tomatically.

50 AudioCD operation
CD player locations
The single CD player* is located behind
the MCS control panel
You can play audio CDs or read data
from the navigation DVD.

The 6 disc CD changer*.
The status line in the main CD menu indi-
cates which component is being used for
CD playback.Tips on caring for your CDs

Only touch the CD on the sides.

Avoid touching the CD recording sur-
face with your fingers.

Clean the CD with a dry, lint-free cloth.
Wipe the CD in a straight line from the
center. Never wipe the CD in a circular
motion.

Do not use rubbing alcohol or solvents
to clean the CDs.

Do not expose the CDs to heat or direct
sunlight.

Do not write or put stickers on CDs.
General information on CD modeWarning
G
The single CD player and CD changer are
Class 1 laser products. There is a danger of
invisible laser radiation if the cover is
opened or damaged.
Do not remove the cover. The single CD
player and the CD changer do not contain
any parts which can be serviced by the user.
For safety reasons, have any necessary ser-
vice work performed only by qualified per-
sonnel.
!Use only CDs with a diameter of 12 cm;
do not use 8-cm CDs.
An 8-cm CD adapter may cause damage
to the CD changer and should not be
used.

51 Audio
CD operation
Inserting or ejecting a CD (Single CD
player*)
Inserting
Press .
The control panel is lowered.

Insert the CD into the CD slot with the
label side up. The CD will automatically
be fed into the CD player.
The control panel closes automatically
after a few seconds.Ejecting

Press .

Press to eject the CD.

Press .
The control panel is raised. After the
CD has been ejected, the MCS will
switch to the last audio mode.
Inserting or ejecting a CDiIf an audio CD is inserted, an audio CD
icon is displayed when in the radio
or tape mode.
iIf the control panel is in the down posi-
tion for more than 20 seconds, two suc-
cessive beeps will be heard.
This will continue at five second inter-
vals until the control panel is returned to
its normal position.
Press to return the control panel
to its closed position.
!A lowered control panel can easily be
damaged. As soon as the CD is ejected,
close the control panel.
Do not place anything on the lowered
control panel. iIf you do not remove an ejected CD, the
CD drive automatically retrieves it after
10 seconds.
The CD drive can read either
Navigation DVDs or

Audio CDs.

56 AudioCD operation
MCS with single CD player*
CD operation begins:
Automatically, by inserting a CD
(page 51)
The playback starts at Track 1.

By pressing when a CD is already
inserted in the CD slot, playback starts
at Track 1.
The telephone functions can be used while
a CD is playing.
To stop CD playback

Eject the CD, switch to the radio or
tape mode, or switch off the MCS.MCS with CD changer*
CD changer operation begins:

Press when CDs are inserted in
the CD changer (
page 52).
The playback starts at Track 1 of the
first CD.
The telephone and navigation functions
can be used while a CD is playing.
To stop CD playback

Switch to the radio or tape mode or
switch off the MCS.
Switching CD operation on and offiThe navigation functions can be used
while a CD is playing in the CD-changer.
MCS with navigation system:
Navigation is only possible when a navi-
gation DVD is inserted in the single CD
player.

57 Audio
CD operation
MCS with single CD player* and CD
changer*
If you press , the MCS starts the CD
m o d e t h a t w a s l a s t a c t i v a t e d . T o s w i t c h b e -
tween CD modes, press again.
Single CD player playback
Single CD player playback begins:
Automatically, by inserting a CD,
(page 51) The playback starts at
Track 1.

By pressing when a CD is already
inserted in the CD slot, playback starts
at Track 1.
To stop CD playback

Eject the CD
or

Switch to the radio, tape or CD changer
or

Switch off the MCSCD changer playback
CD changer operation begins:

By pressing when CDs are insert-
ed in the CD changer, (
page 52).
Playback starts at Track 1.
To stop CD playback

Switch to the radio
or

Switch to tape or single CD player
mode
or

Switch off the MCSThe following error messages can appear
after is pressed:

NO CD - there is no CD inserted. Insert
a CD.

CD ERROR - the inserted CD can not
be read. The CD may be inserted incor-
rectly, be damaged, or is not an audio
CD. The CD may be copy protected. If it
is a recorded CD (instead of a stamped
CD), the quality may be poor or the for-
matting incorrect.

Single CD mode: NAVIGATION
DISC INSERTED... - a navigation
DVD is inserted in the CD slot. Replace
the DVD with an audio CD.Error messages

84 Telephone*Telephone* operation
Press .
The menu to enter the unlock code ap-
pears.
Entering the unlock code

Use the number keys through
to enter the unlock code.
Asterisks instead of digits will appear in
the input line.If the code entered is correct and the
phone is registered in a network, the
phone is ready for use.If the telephone is ready for operation,
READY appears. The graphic (left) depicts
strong signal reception. If you are not in a
home network, the roaming indicator R is
shown.

Switch to an audio mode, navigation
mode*.

Allow the telephone to switch to sleep
mode.
or

Switch off the MCS system.
Switching telephone operation on
iTimeport phones use a three-digit code.
V60 phones use a four-digit code. The
head unit unlocks the phone using the
first three digits of the four-digit V60 un-
lock code.
Your unlock code prevents unautho-
rized persons from using your tele-
phone. Be sure to memorize this code
carefully.
If you enter an incorrect code, the sys-
tem returns to the menu for entering the
unlock code.
You must always enter the unlock code
when you switch on the telephone in
locked mode.
Switching telephone operation off

93 Navigation*
Important notes
Quick reference
Destination input
Route guidance
Destination memory
Settings

94 Navigation*Important notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion- let voice
instructions guide you. Stop at a safe loca-
tion before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
The route calculated by the MCS is a
recommendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict the MCS
instructions.
Warning
G
The DVD reader contains a Class 1 laser
product. There is a danger of invisible laser
radiation if the cover is opened or damaged.
Do not remove the cover. The DVD reader
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any service work which may be necessary
performed only by qualified personnel.
!MCS calculates the route with the help
of data stored on the navigation DVD.
Only use Mercedes-Benz navigation
DVDs. Using other navigation DVDs
might lead to malfunctions.
Because of changes in local traffic pat-
terns (e.g. road work) and/or incom-
plete data, errors in calculation may
occur.
As a result, the recommended route
may deviate from the ideal route. The
data stored on the DVD only reflects lo-
cal conditions at the time of produc-
tion. DVD maps do not cover all areas
nor all routes within an area.