key MERCEDES-BENZ ML-Class 2007 W166 Comand Manual

109 Rear Audio/Video*
Rear Seat Entertainment (RSE) operation*
Soft key functions
4:3, 16:9 or Zoom soft key:
You can change the aspect ratio.
Full scn. soft key:
The soft key display disappears.
Tone soft key:
Brings you to the tone menu, where you
can set Bass and Treble (
page 107).
Bright., Contr. and Color soft
key
s:
Allow you to adjust brightness, cont-
rast and color (
page 107).
Changing the aspect ratio
You can manually change the aspect ratio
during playback. To do this, use the top left
soft key. The soft key changes each time
you press the thumb wheel. Possible aspect ratios are:
4:3, 16:9 and
Zoom.
The soft key indicates the aspect ratio to
which you will change when you press the
thumb wheel.
Turn the thumb wheel to highlight the
top left soft key and press the thumb
wheel in succession until the desired
aspect ratio is set.
Displaying full screen
Turn the thumb wheel to highlight the
Full scn. soft key and press to se-
lect.
The soft keys disappear. The full screen
will appear.You can set the settings for both monitors
separately. To switch between monitors
(
page 90).
Press on the remote.
The System menu will appear.
ML class illustrated
System settings

110 Rear Audio/Video*
Rear Seat Entertainment (RSE) operation*
You can use the following functions:
Bright. soft key:
Adjusts the display brightness.
Design soft key:
Sets the display dimming characteris-
tics.
Pic off soft key:
Switches the monitor off and on. This is
also possible by pressing on the
remote (
page 112).
Lang. soft key:
Selects the language for the menu text
displays.
Speaker soft key:
Selects the source of the speakers
(
page 111).Adjusting the display brightness
Turn the thumb wheel to highlight the
Bright. soft key and press to select.
Press H or h direction to adjust the
brightness.
Press E.
The setting is applied. The System
menu will appear.
Setting the display dimming characteri-
stics
Turn the thumb wheel to highlight the
Design soft key and press to select.
Press G or g to select an entry.
Day Mode
The display is continuously set to
daylight design.
Night Mode
The display is continuously set to night-
time design.
Automatic
The display changes depending on the
ambient light sensor in the vehicle.
Press E.
The setting is applied. The System
menu will appear.
Switching the monitor on and off
Turn the thumb wheel to highlight the
Pic off soft key and press to select.
The monitor is switched off.
Press the thumb wheel again.
The monitor is switched on again.

111 Rear Audio/Video*
Rear Seat Entertainment (RSE) operation*
Selecting the language
Turn the thumb wheel to highlight the
Lang. soft key and press to select.
The languages list will appear.
Press G or g to select the desired
language.
or
Select Instrument cluster.
The display will use the same language
as is set in instrument cluster.
Press E.
The setting is applied. The System
menu will appear.Selecting the source of the speakers
If two audio sources (eg audio CD and
AUX 2) are playing back simultaneously,
one at the left monitor the other at the
right monitor, you can select which source
can be played through the vehicle
speakers via the COMAND AUX channel.
At the COMAND, you can set the volume,
bass and treble, balance and fader and
sound functions* (
page 82).
Turn the thumb wheel to highlight the
Speaker soft key and press to select.
Press G or g to select Left
source
or Right source.
Press E.
The setting is applied. The System
menu will appear.RSE is set to playback
At the COMAND open the Audio menu
(
page 42).
Press the AUX soft key.
Playback begins.
Press during playback (CD or
MP3 CD mode, DVD mode).
The respective operation is muted and
theß symbol is displayed in the status
bar of the corresponding main menu.
Press again.
Playback will resume.
The ß disappears from the status bar.
RSE audio playback through
speakers
Muting on/off

112 Rear Audio/Video*
Rear Seat Entertainment (RSE) operation*
In the CD menu (page 97), MP3 CD
menu (
page 99) or AUX menu
(
page 108) turn the thumb wheel to
highlight the
Bass or Treble soft key
and press to select.
Press H or h.
Bass or Treble is adjusted.
Press E or wait until the display
changes.
The new setting is saved.
Press on remote.
The monitor is switched off.
Press on remote again.
The monitor is switched on again.
Setting bass and treblei
Press H or h and keep it depressed
to move the slider continuously.
Release the soft key to set the current
value.
Monitor off /on

117 Satellite radio*
Subscribing

Subscribing
Press B to switch to satellite radio
operation.
The Satellite radio main menu will ap-
pear and displays the
Weather chan-
nel. You cannnot select any other
station.
Press the Service soft key to display
the Service information display.
The Service information display will ap-
pear.
Service information display
1Phone number of the provider,
(SIRIUS) or “Call Service Provider”
2The Electronical Serial Number (ESN)
of your satellite receiver
Contact satellite radio service provider
at the telephone number displayed in
the screen.After the connection is made:
Follow the instructions given by the
operator.
The activation process may take up to
10 minutes. If it is successful, you will
see the display with the message
Acquiring Signal... (page 118)
followed by the Satellite radio main
menu (
page 118).
Subscribing to satellite radioi
Depending on subscription status, soft
keys may or may not appear on the left
and right side of the service information
display.
i
Credit card information may be re-
quired for your application.
The activation process takes up to ap-
proximately 10 minutes.
If a satellite receiver is not installed or
not properly installed:
The message
No Satellite Radio
will appear.

118 Satellite radio*
Satellite radio operation

Satellite radio operation
See “Subscribing to satellite radio” for im-
portant subscription information
(
page 117).
Press B to switch to satellite radio
operation.
The message will appear at start up or
when the signal is not available.After the COMAND acquires the
signal, the Satellite radio main menu will
appear. The station last tuned to will begin
to play.
Satellite radio main menu
1Program category
2Station name
3Memory preset selected if available
and channel number
Switching on
i
No Satellite receiver:
The message
No Satellite Radio
will appear in a window.
i
The Sound soft key is available if
COMAND is equipped with a sound
amplifier*.
i
You can display 2 in full:
Station information (page 122)

119 Satellite radio*
Satellite radio operation
Muting
Press J while listening to the satel-
lite radio.
The symbol R will appear in the status
bar.
Press J again to resume listening to
the current station.
The symbol R will have disappeared.Satellite radio stations are split up into ca-
tegories. You can select between various
c a t e g o r i e s s u c h a s N e w s , S p o r t s N e w s a n d
Country Music, if available. The category
list is sorted alphabetically.
Selecting a program category
Push the joystick to H or h while
the Satellite radio main menu
(
page 118) is being displayed.
The previous or next program category
(alphabetical order) will appear in the
display. The station last tuned in the
new category will begin to play.
At the beginning of the category list the
category
ALL will appear. This category
is sorted numerically (by channel
numbers) and displays all available
channels.You can use the following functions:
Automatic tuning
Automatic station scan (page 120)
Station selection via direct channel
entry (
page 120)
Station selection from the preset menu
(
page 122)
Automatic tuning
Push the joystick to gor G while
the Satellite radio main menu is being
displayed.
or
Press d or D.
The satellite radio will tune in to the nu-
merically previous or next receivable
station in the selected category.
i
COMAND will also deactivate muting if
you
Press A, B, g, h
Change the volume at COMAND or
the multifunction steering wheel
Operate the joystick
Press any keypad button except #
Press j or k at the
multifunction steering wheel if the
audio menu is selected.
Changing the program categorySelecting a station

120 Satellite radio*
Satellite radio operation
Automatic station scan
The stations in the selected category can
be scanned in numerical order for 8 se-
conds each.
In the Satellite radio main menu, press
the
Scan soft key.
The scan function will begin.Ending scan function and playing a
station
Press the Scan soft key again.
The station selected will appear with
the station name.
Scan will appear in
white lettering again.Station selection via direct channel
entry
Press *.
Input line will appear.
Enter the desired channel number with
the number keys, e.g. 24 for chan-
nel 24.
The channel you have selected will be-
gin to play. The corresponding station
name will appear, if station is available.

121 Satellite radio*
Satellite radio operation
You can use the following functions:
Saving stations manually
Selecting a station from the Satellite
preset memory (
page 122)
Selecting a station by entering the
channel number (
page 120)Saving station manually
In the Satellite radio main menu
Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 222).
The satellite radio saves the current
station at the memory preset selected.
The memory preset selected will ap-
pear in the status line, e.g.
SAT2.
On the memory list
In the Satellite radio main menu, press
the
Presets soft key.
The SAT preset memory will appear.
Satellite preset memory
Push the joystick to gor G to se-
lect a memory preset.
Press E longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 222).
The satellite radio saves the current
station at the memory preset selected.
Memory functions
i
There are 10 presets available.

122 Satellite radio*
Satellite radio operation
You will see the Satellite radio main menu
automatically after 8 seconds
if you press s.Selecting a station on the memory list
In the Satellite radio main menu, press
the
Presets soft key.
The Satellite preset memory
(
page 121) will appear.
Push the joystick to gor G to high-
light a memory preset.
Press E.
The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.
In the Satellite radio main menu, press
the
Info soft key.
The information display will appear.
You will see (if available)
the full station name
additional program information
Switching back to the Satellite radio main
menu
Press the Back soft key.
or
Press the Info soft key again.
i
An existing entry is overwritten in the
memory list when a new input is given.
If the message
Updating station
list
appears the presets may be over-
written.
Displaying information