clock setting MERCEDES-BENZ ML320 1997 Complete Owner's Manual

5
Remove key and engage steering lock

6
Unscrew bolt (32c)

Hold the steering wheel (32).


Installation:
Replace bolt (32c).


*BA46.10-P-1001-02A

7
Pull off steering wheel (32)

Pass cables carefully through the openings.


Installation:
Align recesses of the splines

in the steering wheel with the markings on the

steering shaft (arrows).

8
Check fanfare horns and airbag clock spring

contact (A45) for damage

The clock spring contact must not be

turned while the steering wheel is removed

otherwise it will be damaged.

Visual inspection, replace clock spring

contact if necessary:

#

Removing and installing clock spring contact

AR46.10-P-0200GH

9
Install in the reverse order

10
Carry out road test

Tests during the road test:

Turn signal canceling:

When the steering wheel is offset by

more than 1 tooth, satisfactory resetting of the

turn signal is no longer guaranteed.

Airbag indicator lamp:

The SRS indicator lamp must not light up

on full steering lock in both directions.

Steering wheel position:

If the steering wheel is crooked, adjust it

by max. 1 tooth. If the difference is greater:

#

Check toe on front axle and adjust if

necessary, see:

#

Performing chassis alignment check

AR40.20-P-0200A

Steering wheel

Number

Designation
Model 163

BA46.10-P-1001-02A
Bolt, steering wheel to steering shaft
Nm
80

Copyright DaimlerChrysler AG 09.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 2