mirror controls MERCEDES-BENZ ML320 2003 W163 User Guide

133 Controls in detail
Automatic climate control
Adjusting side air outlets
Turn thumbwheel4 (
page 125), to
one of the following positions:Center air outlets
Opening

Turn thumbwheel center air outlet 1
(page 125) upward to position
h
.
Closing

Turn thumbwheel center air outlet 1
downward to position
M
.
Use the left thumbwheel to adjust the cen-
ter air outlets on the left and in the center.
Use the right thumbwheel to adjust the
right center air outlet.Rear passenger compartment air out-
lets
1Adjustable center air outlet, left
2Adjustable center air outlet, right
Symbol
Function
h
Open
l

Ventilation of side win-
dows in area of exterior
mirror
M
Closed
iThe temperature at the air outlets for
the rear passenger compartment is the
same as at the dashboard center air
outlets.

161 Controls in detail
Useful features
Emergency calls
An emergency call is initiated automatical-
ly:

following an accident in which the
emergency tensioning detractors
(ETDs) or airbags deploy,


if the anti-theft alarm or the tow-away
alarm stays on for more than
20 seconds. See anti-theft alarm sys-
tem (
page 78) and tow-away alarm
(
page 79).
An emergency call can also be initiated
manually by opening the cover next to the
inside rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. See below for instructions on
initiating an emergency call manually.
Warning!
G
The Tele Aid control unit is located under
the front passenger seat. If there is accumu-
lation of water or other liquid in this area,
the Tele Aid control unit could suffer an
electrical short circuit making the system in-
operative. In this case the indicator lamp in
the SOS button will not illuminate during or
will remain illuminated after the system
self-check. Have the system checked at the
nearest Mercedes-Benz Light Truck Center
as soon as possible.
If the indicator lamps in the SOS button, in
the Roadside Assistance button and/or in
the Information button do not come on dur-
ing the system self-check or if any of these
indicators remain illuminated constantly in
red and/or the message
TELE AID - VIS-
IT WORKSHOP
is displayed in the MCS dis-
play after the system self-check, a
malfunction in the system has been detect-
ed.
If a malfunction is indicated as outlined
above, the system may not operate as ex-
pected. Have the system checked at the
nearest Mercedes-Benz Light Truck Center
as soon as possible.

169 Controls in detail
Useful features
Programming or reprogramming the in-
tegrated remote control
Turn key in the steering lock to
position1 or2.

Hold the end of the hand-held transmit-
ter of the device you wish to train
approximately 2 to 5 inches (5 cm to
12 cm) away from the surface of the in-
tegrated remote control located on the
inside rear view mirror, keeping the in-
dicator lamp in view.

Using both hands, simultaneously push
the hand-held transmitter button and
the desired integrated remote control
button. Do not release the buttons until
completing next step.

The indicator lamp on the integrated
remote control will flash, first slowly
and then rapidly. The rapid flashing
lamp indicates successful program-
ming of the new frequency signal.
Warning!
G
When programming a garage door opener,
the door moves up or down.
When programming or operating the remote
control make sure there is no possibility of
anyone being injured by the moving door.iCertain types of garage door openers
are incompatible with the integrated
opener. If you should experience diffi-
culties with programming the transmit-
ter, contact your authorized
Mercedes-Benz Center, or call
Mercedes-Benz Customer Assistance
Center (in the USA only) at
1-800-FOR-MERCedes, or Customer
Service (in Canada) at
1-800-387-0100.
iFor operation in the USA only: This de-
vice complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.

307 Index
Headlamps
Automatic control 103
Bi-Xenon 293
Cleaning 220
Cleaning system 121
Cleaning system* 208
Refilling washer fluid 208
Switching off 51
Switching on 46
Washer fluid 290
Washer system 290
Headliner
Cleaning 221
Heated seats 91
Height adjustment
Head restraints 36, 37
Seat belts 43
Steering wheel 37
High beam flasher 47, 102
High beam headlamps
Replacing bulbs 247, 250
Switching on 102
High mounted brake lamp 248
Replacing bulbs 252Hood 202
Closing 203
Opening 202
Hooks
Loading 140
Hydroplaning 183
I
Identification labels 276
Certification label 276
Vehicle identification number
(VIN) 276
Ignition 33
Immobilizer 78
Activating 51, 78
Deactivating 78
Indicator lamp
Adjustable steering column 229
Brake pad wear 234
Coolant 230
Front fog lamps 229
Low engine oil level 229
Indicators, additional
Speedometer display 235
Infant and child restraint systems 63
Installing 67
LATCH child seat mounts 68Inflating
Spare tire 259
Information
About service and warranty 10
Button for Tele Aid* 165
Inside rear view mirror
Antiglare 119
Installing
Head restraint 92
Infant and child restraint systems 67
Wiper blades 254
Instrument cluster 24, 110, 294
Cleaning 221
Coolant temperature gauge 111
Display in the speedometer 111
Illumination 110
Lamps in 233
Outside temperature indicator 112
Instruments and controls see Cockpit 22
Integrated remote control
Canadian programming 171
Erasing memory 171
Hand-held transmitter 169
Operating 171
Rolling code programming 170