trailer MERCEDES-BENZ ML350 1997 Complete Workshop Manual

[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 1997, Model line: ML350, Model: MERCEDES-BENZ ML350 1997
Pages: 4133, PDF Size: 88.89 MB

Load previous 10 pages

Page 2152 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual COMPONENT LOCATION GRAPHICS
Z54/10In headliner harness, in breakout for W7.
Z55/1In tailgate harness, near breakout to tailgate CL
actuating motor, rear wiper motor & license plate
lights.
Z56/1Beh

Page 2655 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual GENERAL NOTES: PASSENGER CARS - AH00.01-Z-0998AZ
MODEL all
Notes on TowingMODEL 461, 463AH00.60-P-0100-
02GA
Overall vehicle
Overall vehicleFG00AH00.00-Z-9999AZ
Engine
Complete engine,
cr

Page 2849 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual The figure may differ from this, however, depending on quality factors.
The start distance is automatically reset to its initial value by the oil change reset each time the oil is changed.
The start

The figure may differ from this, however, depending on quality factors.
The start distance is automatically reset to its initial value by the oil change reset each time the oil is changed.
The start distance is an internal computed quantity and cannot be displayed in the instrument cluster. It is
possible to display the start distance with the HHT.
What is normally displayed in the instrument cluster is the remaining distance .
The remaining distance is the same as the start distance immediately after the oil change. On engines with oil
sensor (e.g. 112, 113, 166, 611, 668) this applies only, however, if the specified quantity of oil has been added
during the oil change.
The remaining distance is the distance which remains from the current kilometer reading until the next
service. The possible length of the interval is at least as great as the remaining distance displayed
immediately after an oil change, and is at the most twice the start distance.
The remaining distance is dependent on
the start distance
the driving conditions (a weighting of the distance driven takes place)
any oil replenishments in the case of engines with oil sensor (e.g. 112, 113, 166, 611, 668)
Consequently, ASSYST also takes into account the driving conditions: In the case of a favorable weighting
(e.g. small number of cold starts, no high engine revs, small number of short-distance trips, minimum extent of
towing a trailer etc.) and oil replenishments, the driver is provided with a bonus which extends the remaining
distance and thus the service interval. Account is also taken of whether the vehicle is actually driven or whether
the engine runs at idle speed. ASSYST is constantly supplied with the data regarding the current operating
conditions of the vehicle for this purpose.
In the case of the best weighting , only 0.6 km are added for each kilometer driven.
In the case of the most unfavorable weighting of the distance (e.g. frequent short-distance trips, large number
of cold starts), the remaining distance and thus the service interval is smaller than in the case of the most
favorable weighting (assuming identical quality factors).
In the case of the most unfavorable weighting, up to 3 km are added for each kilometer driven.
The start distance and the remaining distance are once again presented in the form of a graph in the diagram
opposite, taking the example of gasoline engines
Each time the oil is changed, the start and remaining distances are set to the initial value. In this case, the
normal value of 15 000 km is entered as the start distance (top bar) (shaded + dark section). The start distance
may differ from 15 000 km (e.g. 14 000 km; shaded section) if the quality factors do not correspond to the basic
setting. In the case of engines fitted with oil sensor (e.g. 112, 113, 166) the start distance may also be less than
15 000 km if the specified oil quantity was not added during the oil change. The remaining distance (bottom
bar) is always 15 000 km, however, immediately after an oil change. In addition, the service interval is
always at least 15 000 km .

2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Saturday, October 02, 2010 3:47:47 PMPage 204 © 2006 Mitchell Repair Information Company, LLC.

Page 3054 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual Repair materials
RETROFITTING & CONVERSION
TABLE OF CONTENTS FOR RETROFITTING AND CONVERTING SPECIAL EQUIPMENT - AN00.10-P-1000NZ
MODEL 163
cleaning agents.
Only for Activated
charcoal filter,

Page 3058 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual CAPACITIES & SPECIFICATIONS
SPECIFIED ENGINE OILS (SERVICE) - OVERVIEW - BB00.40-P-0223-02A
For Mercedes-Benz and Smart
AZ88.30-P-
0008GH
Retrofit styling
spoilerModels 163.113 /154 #A as of 289

CAPACITIES & SPECIFICATIONS
SPECIFIED ENGINE OILS (SERVICE) - OVERVIEW - BB00.40-P-0223-02A
For Mercedes-Benz and Smart
AZ88.30-P-
0008GH
Retrofit styling
spoilerModels 163.113 /154 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175 except styling package,
code U49AZ88.30-P-
0008GH
AZ82.70-P-
0006GH
Retrofit portable
CTELModel 163 as of 1.9.00 up to 30.9.01
portable cellular telephone Nokia 51 xx
and 61xxAZ82.70-P-
0006GH
AZ83.70-P-0009HRetrofitting Telestart
receiverModel 163.###1# up to 31.12.99
Telestart T60 with retrofitted stationary
heaterAZ83.70-P-0009H
AZ83.70-P-
0009HARetrofitting Telestart
receiverModel 163.### 1 # Telestart T70 with
windshield antenna, with retrofitted
stationary heaterAZ83.70-P-
0009HA
AZ83.70-P-
0009HBRetrofitting Telestart
receiverModels
163.113 /128 /136 /154 /157 /172 /174 /175
1# as of 1.9.01 with model year 2002, code
802 Telestart T70 with windshield antenna,
with retrofitted stationary heaterAZ83.70-P-
0009HB
AZ88.30-P-
0004GH
Retrofit step
platformModels 163.136 /154 /172 #A as of
145273,
163.136 /154 /172 #X as of 708319,
163.113/128/157/174/175
with illuminationAZ88.30-P-
0004GH
AZ88.30-P-
0004GI
Retrofit step
platformModels
163.113 /128 /136 /154 /157 /172 /174 /175
without illuminationAZ88.30-P-
0004GI
AZ54.65-P-0001I Retrofit ultrasonic
back-up aidModel 163.1 up to 31.08.01 except spare
wheel holder/spare wheel, code 849,
except trailer hitch, code 550AZ54.65-P-0001I
AZ82.10-P-
0001GHRetrofitting
additional headlampModel 163.113/154 #A as of 289565,
163.113 #X as of 754620,
163.128 /157 /175 except styling package,
code U49, except USA version, code 494a.
with styling spoiler onlyAZ82.10-P-
0001GH
BB00.40-P-0223-02A
Specified engine oils
(service) - overviewFor Mercedes-Benz and
Smart
Sheet 223.2
viscosity classesSheet 224.1 (passenger-car
engines)BB00.40-P-0224-01A

2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Saturday, October 02, 2010 3:47:52 PMPage 413 © 2006 Mitchell Repair Information Company, LLC.

Page 3066 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual Fina Kappa Supra X Total Lubrifiants, Paris la
Defense Cedex, France
Fina Kappa Turbo
DI XX Total Lubrifiants, Paris la
Defense Cedex, France
Forol Unimax
15W40 X Patting d.o.o., Varazdin,
C

Page 3483 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual
GF54.30-P-3002A
Indicator and warning signals triggered over direct lines, function
24.10.96

MODEL
129, 140 as of 1.6.96,

163, 168, 170,

202 as of 1.8.96,

208 up to 31.7.99,

210 as of 1.6.

GF54.30-P-3002A
Indicator and warning signals triggered over direct lines, function
24.10.96

MODEL
129, 140 as of 1.6.96,

163, 168, 170,

202 as of 1.8.96,

208 up to 31.7.99,

210 as of 1.6.96 up to 30.6.99

Indicator and warning signals

Indicator lamps for left turn signal (A1e1) and right turn signal

(A1e2)
The signal in models 129, 140, 170, 202 comes from the

combination relay (turn signals with trailer coupling, rear

window defroster, wiper motor, anti-theft alarm system)

(N10/2), and in model 210 from the multifunction control

module (N10-1) or the driver's side signal acquisition and

actuation module (SAM) (N10/1).

In model 168 the entire turn signal control is located in the

instrument cluster (A1).

Brake fluid / parking brake warning lamp (A1e7)

The signal for the brake fluid comes direct from the brake fluid level switch (S11) (except model 163).

(The signal for the parking brake comes over CAN.)

Low windshield washer fluid level warning lamp (A1e13) except

models 163 and 168
See

document: Coolant/washer fluid level voltage coding, task /

function

-----------------------------------------------------------------------------------------
Low windshield washer fluid level warning lamp (A1e13) as of

01.09.01 for model 163
See document: Displaying washer fluid level, function

Low engine coolant level warning lamp (A1e11) except models

163 and 168
See

document: Coolant/washer fluid level voltage coding, task /

function

Low engine coolant level warning lamp (A1e11) model 163 as of

3.99
See

document: Displaying coolant level, function

Coolant level and temperature warning lamp (A1e11) model 168

as of 9.99
See

document: Displaying coolant level, function

Fuel reserve warning lamp (A1e4)
When the reserve fuel level is reached, this lamp lights up and

goes out again only after refueling is detected. If the vehicle is

refueled with the ignition ON, refueling is detected only if at

least 7 liters of fuel are added.

-----------------------------------------------------------------------------------------

AIRBAG OFF indicator lamp (A1e56), only model 163 except

I

The signal comes from the emergency tensioning retractor

(ETR) control module with airbag (AB, N2/2)

Generator charge indicator/warning lamp (A1e5)

See document: Terminal 61 and terminal 61e, charge indicator

lamp, exterior lamp failure, function

Seatbelt/backrest lock warning lamp (A1e9)

The seat belt warning lamp is only used in a few national

versions, and is actuated direct by a seat belt buckle switch
(normally closed contact). After engine start, the lamp flashes

for a short time (approx. 6 seconds).

In model 129 if this lamp fails to go out after flashing briefly, but

continues to shine constantly, then the seat backrest is not

locked.
Exterior lamp failure indicator lamp (A1e14)

The signal comes from the lamp failure monitor

See document: Terminal 61 and terminal 61e, charge indicator

lamp, exterior lamp failure, function
Hydraulic fluid level warning lamp (A1e37)
The signal comes direct from the ADS level control oil level

switch (S44).

ADS warning lamp, suspension (A1e27) The signal comes from the ADS control module, suspension
(N51).

SRS airbag malfunction indicator lamp (A1e15)
The signal comes from the emergency tensioning retractor

(ETR) control module with airbag (AB, N2/2)

Voltage coding of coolant / windshield washer

fluid level, function
Except models 163 and 168

GF54.30-P-3006A

Displaying coolant level, function
Model 163 as of 3.99

GF54.30-P-3028GH

Model 168 as of 9.99

GF54.30-P-3028GC

Terminal 61 and terminal 61e, charge

indicator lamp, exterior lamp failure, function

GF54.30-P-3007A

Copyright DaimlerChrysler AG 04.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

Page 3993 of 4133

MERCEDES-BENZ ML350 1997 Complete Workshop Manual
AR40.10-P-1010-01A
Checking condition of rim

P40.10-0259-01

1
Check inside and outside of wheel for dirt and clean wheel if necessary.

2
Check contact surface of rim for dirt and clean if necess

Page: < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60