reset sun roof MERCEDES-BENZ ML350 2005 W163 Owner's Manual

ContentsAt the gas station............................... 219
Refueling ...................................... 219
Check regularly and
before a long trip .......................... 221
Engine compartment.......................... 222
Hood ............................................ 222
Engine oil...................................... 223
Transmission fluid level ................ 227
Coolant level ................................ 227
Battery ......................................... 228
Windshield / rear
window washer system and
headlamp cleaning system*......... 230
Tires and wheels ................................ 231
Important guidelines .................... 231
Life of tire ..................................... 232
Direction of rotation ..................... 232
Checking tire inflation pressure ... 232
Rotating wheels............................ 233
Winter driving..................................... 235
Winter tires................................... 235
Block heater (Canada only) .......... 236
Snow chains ................................. 236Maintenance ...................................... 237
Clearing the
maintenance service indicator ..... 237
Maintenance service
term exceeded ............................. 238
Calling up the
maintenance service indicator ..... 238
Resetting the
maintenance service indicator ..... 238
Vehicle care ....................................... 240
Cleaning and care of the vehicle .. 240
Practical hints.................................. 247
What to do if … .................................. 248
Lamps in instrument cluster ........ 248
Additional indicators
in the speedometer display .......... 263
Where will I find ...? ........................... 264
First aid kit ................................... 264
Vehicle tool kit ............................. 264
Spare wheel (space-saver tire) ..... 266Unlocking / locking in
an emergency .................................... 268
Unlocking the vehicle................... 268
Locking the vehicle ...................... 269
Fuel filler flap ............................... 269
Manually unlocking the
transmission gear selector lever .. 270
Opening / closing in
an emergency .................................... 271
Power tilt / sliding sunroof* ......... 271
Replacing key batteries ..................... 272
Remote control ............................ 273
Replacing bulbs ................................. 274
Bulbs ............................................ 274
Replacing bulbs for front lamps ... 276
Replacing bulbs for rear lamps .... 279
Adjusting headlamp aim .............. 282
Replacing wiper blades ...................... 283
Removing ..................................... 283
Installing ...................................... 283
Flat tire .............................................. 284
Mounting the spare wheel ........... 284

191 Controls in detail
Useful features
Setting the compass zone
Determine the geographical point of
the vehicle with the aid of the zone
maps.

Switch on the ignition.

Press MODE2 (
page 189) repeat-
edly until the compass display appears
in the trip computer display3.

Press RESET1 (
page 189) to select
the compass zone mode.
The zone selected last is shown in the
display.

Press RESET1 repeatedly until the
correct compass zone, as determined
from the zone map, is shown in the dis-
play.

Press MODE2 twice.
The new compass zone is activated and
the compass display will be shown.Calibrating the compass
If the vehicle was exposed to a significant
magnetic zone, such as high voltage power
lines, the compass may have to be calibrat-
ed.
To calibrate the compass correctly, ob-
serve the following:


Calibrate the compass in an area free
of steel superstructures and power
lines.


Switch off all electrical consumers (e.g.
exterior lamps, climate control, rear
window defroster etc.).


Do not open or close the tilt / sliding
sunroof.


Close doors and liftgate.

Start and run the engine.

Press MODE2 (
page 189) repeat-
edly until the compass display appears
in the trip computer display3.

Press RESET1 and afterwards press
MODE2.
In the display appears
CAL–
.

Press and hold RESET1 for approxi-
mately two seconds.
The calibration mode is activated and
the display shows
CAL
.

Drive without interruption two full cir-
cles at a speed between 3 mph
(5 km / h) and 7 mph (10 km / h).
The message
CAL
goes out after a short
time. The calibration is now complete.
iAn open liftgate triggers the
display
---
.