mirror controls MERCEDES-BENZ R350 2006 W251 User Guide
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2006, Model line: R350, Model: MERCEDES-BENZ R350 2006 W251Pages: 561
Page 210 of 561
209 Controls in detail
Good visibility
Auto-dimming rear view mirrors*
The reflection brightness of the exterior
rear view mirror on the driver’s side and
the interior rear view mirror will respond
automatically to glare when
the ignition is switched on
incoming light from headlamps falls on
the sensor in the interior rear view
mirror
The rear view mirror will not react if
reverse gearR is engaged
the interior light is turned on
Warning!
G
The auto-dimming function does not react if
incoming light is not aimed directly at sen-
sors in the interior rear view mirror.
The interior rear view mirror and the exterior
rear view mirror on the driver’s side do not
react, for example, when transporting cargo
which covers the rear window.
Glare can endanger you and others.Warning!
G
In case of an accident liquid electrolyte may
escape from the mirror housing if the mirror
glass breaks.
Electrolyte has an irritating effect. Do not
allow the liquid to come into contact with
eyes, skin, clothing, or respiratory system.
In case it does, immediately flush affected
area with water, and seek medical help if
necessary.
!Electrolyte drops coming into contact
with the vehicle paint finish can be
completely removed only while in the
liquid state and by applying plenty of
water.Warning!
G
Exercise care when using the passen-
ger-side exterior rear view mirror. The mirror
surface is convex (outwardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your
interior rear view mirror or glance over your
shoulder before changing lanes.
Page 211 of 561
210 Controls in detailGood visibilityActivating exterior rear view mirror
parking position*
Follow these steps to activate the exterior
rear view mirror parking position, so that
the passenger-side exterior rear view mir-
ror will be turned downward to the stored
position.
Make sure that you have stored a park-
ing position for the passenger-side
exterior rear view mirror (
page 146).
Make sure the
Mirror adjustment
parking aid function in the
Convenience
submenu of the control
system is set to
on (page 190).
Start the engine (
page 53).1Driver’s side exterior rear view mirror
button
2Passenger-side exterior rear view
mirror button
Set the automatic transmission in
reverse gear R.
The passenger-side exterior rear view
mirror turns downward to the stored
position (
page 146) if the passen-
ger-side exterior rear view mirror is se-
lected.
The indicator lamp in button 2 should
come on when you select reverse
gearR.
If the passenger-side exterior rear view
mirror is not selected, press button 2.
The exterior rear view mirror returns to its
previous stored driving position:
when you switch off the ignition
10 seconds after you have put the
automatic transmission out of reverse
gear R
Approximately 15 seconds later, the
indicator lamp in button 2 goes out.
immediately once your vehicle exceeds
a speed of approximately
6mph(10km/h)
immediately when you press button 1
for driver’s side exterior rear view
mirror
iWith the automatic transmission in re-
verse gear R, the previously selected
rear view mirror is activated. The indi-
cator lamp in the respective button
comes on.
iWith the automatic transmission in re-
verse gear R, you can deactivate the
exterior rear mirror parking position by
pressing button 1 or activate it by
pressing button 2. The indicator lamp
of the selected button is on.
Page 212 of 561
211 Controls in detail
Good visibility
Power folding exterior rear view mirrors*
Folding the exterior rear view mirrors
in and out automatically
When the corresponding function in the
control system is activated (
page 191):
The exterior rear view mirrors automat-
ically fold in as soon as the vehicle is
locked from the outside.
The exterior rear view mirrors automat-
ically fold out as soon as the vehicle is
unlocked and the driver’s or front pas-
senger door are subsequently opened.Synchronizing exterior rear view
mirrors
The power folding rear view mirrors may
have to be synchronized after the vehicle
battery has been disconnected or dis-
charged. If the exterior rear view mirrors
do not fold properly upon locking or un-
locking the vehicle although the corre-
sponding function in the control system is
activated (
page 191), do the following:
Fold each exterior rear view mirror in
completely (
page 212).
Fold each exterior rear view mirror out
completely (
page 212).
When the exterior rear view mirrors fold
properly upon locking the vehicle, the exte-
rior mirrors are synchronized. Otherwise
repeat the above steps.Folding the exterior rear view mirrors
in and out manually
The button is located on the door control
panel.
1Button for folding exterior rear view
mirrors in and out
Switch on the ignition (
page 38).
!Before you drive the vehicle through an
automatic car wash, fold the exterior
rear view mirrors in. Otherwise they
may get damaged.
iThe exterior rear view mirrors can vi-
brate if they are not folded out com-
pletely.
Page 213 of 561
212 Controls in detailGood visibilityFolding in
Briefly press button1.
Both exterior rear view mirrors fold in.
Folding out
Briefly press button1 again.
Both exterior rear view mirrors fold out.
Sun visors
The sun visors protect you from sun glare
while driving.
iIf you are driving at more than approxi-
mately 30 mph (47 km/h), you will not
be able to fold the exterior mirrors in.
!If an exterior rear view mirror housing
is forcibly pushed forward (hit from the
rear) or forcibly pushed rearward (hit
from the front) press button1 to fold
mirrors in, then press button1 again
to fold mirrors out. Do not force mirrors
by hand as this may damage the adjust-
ment mechanism.
The mirror housing is then properly
positioned and you can adjust the mir-
ror in the usual manner.
Warning!
G
Do not use the vanity mirror while driving.
Keep the mirrors in the sun visors closed
while vehicle is in motion. Reflected glare
can endanger you and others.
Page 214 of 561
213 Controls in detail
Good visibility
1Sun visor
2Additional sun visor*
3Mirror lamp
4Vanity mirror cover
5Vanity mirror
6Holder for gas cards
7Mounting
Glare through the windshield
Swing sun visor1 down.
Make sure sun visor 1 is properly en-
gaged in mounting 7.
When you do not experience glare any-
more, swing sun visor 1 up.Vanity mirror
Swing sun visor1 down.
Flip up cover4 to access vanity
mirror5.
Vanity mirror lamp3 comes on.
After using vanity mirror 5, flip down
cover4.
Swing sun visor 1 up.
Glare through a side window
1Sun visor
2Additional sun visor*
Swing sun visor1 down.
Disengage sun visor1 from
mounting7 (
page 213).
Pivot sun visor1 to the side.
Adjust sun visor 1 by pushing or pull-
ing in the direction of the arrows.
Swing down additional sun visor*2
down when you experience additional
glare through the windshield.!To avoid damage to vanity mirror
cover4 (
page 213), make sure it is
closed before pivoting sun visor 1 to
the side.
Page 314 of 561
313 Controls in detail
Useful features
Emergency calls
An emergency call is initiated automatical-
ly following an accident in which the emer-
gency tensioning devices (ETDs) or
air bags deploy.
An emergency call can also be initiated
manually by opening the cover next to the
interior rear view mirror labeled SOS, then
briefly pressing the button located under
the cover. See (
page 314) for
instructions on initiating an emergency call
manually.Once the emergency call is in progress, the
indicator lamp on the SOS button will
begin to flash. The message
Connecting Call
appears in the multifunc-
tion display. When the connection is estab-
lished, the message
Call connected
appears in the multifunction display. All in-
formation relevant to the emergency, such
as the location of the vehicle (determined
by the GPS satellite location system), vehi-
cle model, identification number and color
are generated.
A voice connection between the Response
Center and the occupants of the vehicle
will be established automatically soon af-
ter the emergency call has been initiated.
The Response Center will attempt to
determine more precisely the nature of the
accident provided they can speak to an
occupant of the vehicle.
Warning!
G
If the indicator lamps on the SOS button, on
the Roadside Assistance button, and/or on
the Information button remain illuminated
continuously in red and/or the message Malfunction. Drive to workshop
is
displayed in the multifunction display after
the system self-check, a malfunction in the
system has been detected.
If a malfunction is indicated as outlined
above, the system may not operate as
expected. Have the system checked at the
nearest Mercedes-Benz Light Truck Center
as soon as possible.
Page 321 of 561
320 Controls in detailUseful features
Garage door opener*
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to
replace up to three hand-held remote
controls used to operate devices such as
garage door openers, gate openers, or
other devices compatible with HomeLink
®
or some other systems.
Before the integrated remote control can
be used, it must be programmed to the
garage door opener, gate operator or other
device you wish to operate. See the follow-
ing instructions for programming informa-
tion.
Interior rear view mirror with integrated
remote control1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control but-
ton
iWhen the anti-theft alarm or the
tow-away alarm stays on for more than
30 seconds, a call is initiated automat-
ically to the Response Center. See
anti-theft alarm system (
page 104)
and tow-away alarm (
page 106).
Page 545 of 561
544 IndexHeadliner
Cleaning 402
Height adjustment
Head restraints 44
Seat belts 52
Steering wheel 45
High beam flasher 58, 152
High beam headlamps
Messages in display 443
Switching on 151
Hood 345
Closing 346
Message in display 439
Opening 345
Hooks
Loading 282
Hydroplaning 335
I
Identification labels 510
Certification label 510
Vehicle identification number
(VIN) 511
Ignition 38
Switching on 54Immobilizer 104
Activating 104
Deactivating 104
Infant and child restraint systems 82
Installing 90
LATCH child seat mounts 92
Information
About service and warranty 10
Button for Tele Aid* 317
Infrared reflecting windshield* 328
Inside rear view mirror
Antiglare 209
Installing
Front wiper blades 476, 477
Infant and child restraint systems 90
Vehicle battery 489
Instrument cluster 24, 158, 531
Cleaning 401
Illumination 158
Lamps in 409
Outside temperature indicator 159
Selecting language 178
Instruments and controls see CockpitInterior lighting 154
Activating automatic control 155
Deactivating automatic control 155
Delayed switch-off 185
Manual operation 155
Interior rear view mirror
Adjusting 48
Intermittent wiping 60
J
Jump starting 496
K
Key, Mechanical 459
KEYLESS-GO*
Closing tailgate 128, 129
Loss of SmartKey with
KEYLESS-GO* 121
Starting the engine 54
Turning off engine 66
Unlocking and opening, tailgate 120
Unlocking with 37
Kickdown 203, 531
Kilometers/miles in speedometer 178
Kilopascal 386
Kilopascal (kPa) 531
Km/h or mph in speedometer 178