CD changer MERCEDES-BENZ S-Class 2004 W220 Comand Manual

Contents
Where to find it . . . . . . . . . . . . . . . . . . . 1
Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 2
Operating safety. . . . . . . . . . . . . . . . . . . 3At a glance . . . . . . . . . . . . . . . . . . . . . . 5
Radio operating elements . . . . . . . . . . . 6
Tape operating elements . . . . . . . . . . . . 8
CD operating elements . . . . . . . . . . . . 10
Satellite radio* operating elements . . . 12
Navigation operating elements . . . . . . 16
Service operating elements . . . . . . . . . 18
Menu system . . . . . . . . . . . . . . . . . . . . 20
Quick reference COMAND . . . . . . . . . . 23
Switching the COMAND control unit
on and off . . . . . . . . . . . . . . . . . . . . 23
Volume . . . . . . . . . . . . . . . . . . . . . . 23
Balance and fader . . . . . . . . . . . . . . 25
Bass and Treble . . . . . . . . . . . . . . . 26
Sound functions* . . . . . . . . . . . . . . 27
Audio. . . . . . . . . . . . . . . . . . . . . . . . . . 29
Radio operation . . . . . . . . . . . . . . . . . . 30
Opening the Audio menu . . . . . . . . 30
Selecting an audio source . . . . . . . 30
Muting . . . . . . . . . . . . . . . . . . . . . . 30
Switching the radio operation on . . 31
Changing the Radio band . . . . . . . . 32
Selecting a station . . . . . . . . . . . . . 33
Memory functions . . . . . . . . . . . . . . 36
Tape operation . . . . . . . . . . . . . . . . . . . 40
Notes on tape care . . . . . . . . . . . . . 40
Switching tape operation on . . . . . . 40
Seeking/skipping tracks . . . . . . . . 41
Changing sides . . . . . . . . . . . . . . . . 42
Fast forward/rewinding . . . . . . . . . 42
Scan function . . . . . . . . . . . . . . . . . 43
Skip blanks . . . . . . . . . . . . . . . . . . . 43
DOLBY B (noise reduction) . . . . . . . 44
Muting . . . . . . . . . . . . . . . . . . . . . . 44
Return to the Audio menu . . . . . . . 44CD operation . . . . . . . . . . . . . . . . . . . . 45
General Information on
CD operation. . . . . . . . . . . . . . . . . . 45
Tips on caring for your CDs . . . . . . 46
Switching to CD operation . . . . . . . 47
Loading CDs . . . . . . . . . . . . . . . . . . 47
Switching on . . . . . . . . . . . . . . . . . . 49
Selecting a CD (CD changer* only). 50
Track select . . . . . . . . . . . . . . . . . . 51
Fast forward/reverse . . . . . . . . . . . 53
Muting. . . . . . . . . . . . . . . . . . . . . . . 53
Playback mode . . . . . . . . . . . . . . . . 54
MP3-CD operation . . . . . . . . . . . . . . . . 56
General Information . . . . . . . . . . . . 56
Tips on caring for your MP3-CDs . . 56
Switching to MP3-CD operation . . . 57
MP3-CD main menu . . . . . . . . . . . . 58
Selecting a folder . . . . . . . . . . . . . . 58
Selecting a track . . . . . . . . . . . . . . . 58
Playback mode . . . . . . . . . . . . . . . . 60
MP3 options . . . . . . . . . . . . . . . . . . 61 Telephone* operating elements . . . . . . 14 Introduction . . . . . . . . . . . . . . . . . . . . . 1

1
Where to find itIntroduction

Where to find itThis Operator’s Manual is designed to pro-
vide support information for you, the
COMAND operator. Each chapter has its
own guide color to provide fast access to
information.At a glance
Here you will find an overview of
all COMAND control elements and system
components. If you are operating
COMAND for the first time or if you have
rented or borrowed the vehicle, this is the
chapter you should read first.Audio
Here you will find all the information on
how to use the radio, cassette player*, CD-
player, CD changer* and DVD drive.
Satellite radio*
This chapter provides information on how
to select a station and a program category.Telephone*
Here you can learn in detail about the
many functions of the telephone, how to
initiate an emergency call and use the pho-
ne book.Navigation
This chapter provides detailed information
on the following topics:
Destination input

Route guidance including detour

Last destinations and destination
memory

POIs
Service
Here you will find all the information about:
SMS

Address book

Notebook

Tele Aid*
System settings
This chapter provides information on how
to adjust COMAND system settings.Directories
The glossary explains the most important
technical terms.
The table of contents and index directory
will help you quickly locate the information
you need.

3 Introduction
Operating safety
Warning
G
Any alterations made to electronic compo-
nents and the software can cause malfunc-
tions.
The radio, amplifier, CD changer*, satellite
radio*, telephone*, navigation module and
voice control system* are interconnected.
When one of the components is not operati-
onal or has not been removed/replaced pro-
perly, the function of other components may
be impaired.
This condition might seriously impair the
operating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
only by qualified personnel.
Warning
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the system only when road
and traffic conditions permit.
Bear in mind that at a speed of just
30 mp/h (approximately 50 km/h), your car
is covering a distance of 50 feet (approxima-
tely 14 m) every second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we encoura-
ge the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the COMAND screen to read na-
vigational maps, instructions, or downloa-
ded information.
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, including
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. This al-
ways remains your personal responsibility
when you drive. DVD maps do not cover all
areas nor all routes within an area.

Operating safety

11 At a glance
CD operating elements
Function
Page
1
Audio menu
30
2
Soft keys
(multifunction keys)
3
Color screen if CD/DVD
slot is open
48
4
1 - 0
Selecting a CD (CD
changer* only)
Track select
50
52
5
H and h
Selecting a CD (CD
changer* only)
Selecting a folder
(MP3-CD)
g and G
Track select
Selecting a track
(MP3-CD)
50
58
52
58
Function
Page
6
E Confirm
7
CD ejection
48
8
CD/DVD slotiThe CD changer* is
located in the trunk.
49
9
J
Muting
53
Function
Page
a
Volume control
24
b
e Switch on/off
23
c,
d
d and D
Track select
Fast forward/reverse
Selecting a track
(MP3-CD)
Skip track (MP3-CD)
51
53
58
59

23 At a glance
Quick reference COMAND
Switching on
Turn the key in the steering column
lock to position 1 or 2.
or

Press e.
In both cases, the system will activate
the operating mode which was active
when the system was switched off.Switching off

Turn the key in the steering column
lock to position 0 and pull the key out.
or

Press e.
The volume is adjusted jointly for the
telephone*, the navigation system and the
Voice control system.
The volume setting applies to other
operating modes as well: radio, tape, CD,
CD changer*, MP3-CD and DVD.
When you adjust the volume, the system
will automatically store the setting for the
current operating mode. The volume for
the navigation announcements can only be
changed while an announcement is being
made.
iYou have the following options to
control the system:
at the COMAND

at the multifunction steering wheel
(refer to vehicle Operator's Manual)

using the Voice control system*
(refer to separate operating
instructions for further information)
This Operator’s Manual describes the
control at the COMAND.
Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
Switching the COMAND control unit
on and offiIf the key is not in the steering lock in
position 1 or 2, the system will
automatically stop after around 30
minutes. A warning is displayed prior to
the system switching off.
Volume

Quick reference COMAND

25 At a glance
Quick reference COMAND
Common balance and fader settings apply
to the following sytems:
Radio operation

Tape operation

CD operation (single CD)

CD changer* operation

MP3-CD operation

DVD operation
Different balance and fader settings can be
set for navigation and telephone*.The balance/fader settings for navigation
announcements are described at “Audio
settings for the navigation
announcements” (
page 117).
When you make balance or fader settings,
the system will automatically save the
settings for the current operating mode
and others.
Setting balance and fader
In radio, tape, CD, CDC*, MP3-CD or DVD
operation:

Press the
Bal/Fad
soft key.
Cross-hairs are displayed. The
horizontal line indicates the balance
setting. The vertical line indicates the
fader setting. You can now make
balance and fader settings.
Balance and fader

26 At a glanceQuick reference COMAND
Press H or h.
Move the cross-hairs horizontally and
adjust the balance.
or

Press g or G.
Move the cross-hairs vertically and
adjust the fader.

Press E or the
Back
soft key.
or

Wait until the display changes.
The new setting is saved.Different bass and treble settings are
possible for the following operating
modes:

Radio operation (FM and AM band)

Tape operation

CD operation (single CD)

CD changer* operation

MP3-CD operation

DVD operation

Navigation operation
The Bass/Treble settings for navigation
announcements are described at “Audio
settings for the navigation
announcements” (
page 117).When you adjust Bass or Treble, the
system will automatically save the settings
for the current operating mode.
Activating the Bass or Treble menu
In radio, tape, CD, CDC*, MP3-CD or DVD
operation:

Press the Bass or Treble soft key.
The Bass or Treble menu will appear.
You can now make bass or treble
settings (
page 27).
iUse F and f to move the
cross-hairs diagonally.
Bass and Treble

28 At a glanceQuick reference COMANDActivating the sound functions*
In radio, tape, single CD or CD changer*
operation:
Activate the main menu for the
respective operating mode
(page 20).

Press the
Sound
soft key.
The Sound menu appears.

Press g or G to select the desired
function.

Press E.
The function is activated.
iSurround sound offers a sound quality
superior to conventional stereo sound.
If the radio reception is poor, the
system should be switched back to
standard stereo playback. Switching
back to standard stereo playback may
improve reception quality.

45 Audio
CD operation
General Information on CD operationWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 50 feet (approximately 14 m)
every second.
Warning
G
The CD drive and CD changer* are Class 1
laser products. There is a danger of invisible
laser radiation when you open or damage
the cover.
Do not remove the cover. The CD drive and
the CD changer* do not contain any parts
which can be serviced by the user. For safe-
ty reasons, have any necessary service work
performed by qualified personnel.iOnly use CDs, which bear the label
shown and that conform to the compact
standard (IEC 60908). You can there-
fore only use CDs with a maximum
thickness of 1.3 mm.
iThe COMAND CD drive may not be able
to play audio CDs with copy protection
or copied CDs.!Use only CDs with a diameter of 12 cm,
do not use 8-cm CDs.
An 8-cm CD adapter may cause dama-
ge to the CD changer* and should not
be used. iYour CD drive has been designed to
play CDs which correspond to the EN
60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.

CD operation

47 Audio
CD operation
Playback locations for audio CDs are:
the CD drive in the COMAND

the CD changer*.
Differences regarding the CD mode
depending on the audio source are
highlighted.

In the Audio menu (
page 30), press
the
CD
or the
CD
soft key.
CD changer* main menu
CD drive
CD changer*
Switching to CD operation
iThe
CD-Mag
soft key is only assigned
when the CD changer* is active.
The
Sound
soft key appears if the
COMAND is provided with sound
functions* (page 27).
iThe CD drive in the COMAND can
playback audio CDs, MP3-CDs
(page 56). The slot of the drive is
behind the display.
iThe CD changer* can accomodate up
to 6 audio CDs. It is located on the left-
hand side in the trunk.
Loading CDsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 50 feet (approximately 14 m)
every second. iThe COMAND may be unable to
playback audio CDs provided with copy
protection.