Page 44 MERCEDES-BENZ S-Class 2005 W220 Comand Manual

183 Service
Address book
Ending the data input
When all data are entered, press the Back
soft key in the entry edit menu.
The data are saved.
Importing a mobile phone internal
memory entry
Mobile phone internal memory entries only
contain a name and a telephone number.
You can import mobile phone internal
memory entries into the address book and
enter additional data.

Activate the detail view of the desired
mobile phone internal memory entry
(page 182).

Press the
Import
soft key.

Press g or G to select between Create New Entry
and
Add To
.

Press E.Option
Create New Entry
:
The system automatically takes over name
and number of the mobile phone internal
memory entry. You only need to define the
name and surname under which the
system is to store the phone number.

Press E or press the
OK
soft key.
If the current phone number’s category
is not
Cell
, Work
or
Home
a selection
menu will appear.

Select a number type under which
the system is to store the phone
number.

Press G or g to select an entry.

Press E.
The system imports the data. The
message
Entry Imported to
Address Book
will appear.

184 ServiceAddress bookOption
Add To
:
You can now select an address book entry
to which the system is to add the phone
number of the mobile phone internal
memory entry.

Select an address book entry
(page 177).

Press E.
If the current phone number’s category
is not
Cell
, Work
or
Home
a selection
menu will appear.

Select a number type under which
the system is to store the phone
number.

Press G or g to select an entry.

Press E.If no entry exists for the number type,
the system will import the data.
If an entry exists, the system will ask
whether you wish to overwrite the
entry.
Overwrite the entry

Press E.
The system imports the data.If you do not wish to overwrite the entry

Press h to select
No
.
or

Press the
Back
soft key.
You can now again select a number
type.

185 Service
Address book

In the Address book menu
(page 176), press the
New
soft key.
The entry creation menu will appear.
A list with data fields is displayed
(Surname, Name, Cell, URL).You can use the softkey to use additional
functions for the address book entry.

GenInfo
, Co.
(Company)
, PrivInfo

and
Keypad
soft key:
You can create a new address book
entry.

Note
soft key:
You can add a note (
page 180).

New
or
Del.
soft keys:
You can add or delete a spoken name
to or from the address book
(
page 180).

Play
soft key:
Plays back the spoken name
(
page 181).

Export
soft key:
Exports parts of the address book entry
to the mobile phone internal memory
(
page 181).

Press g or G to select a data field
(e.g.
Name
).
You can enter data in a field using the
12-keys keyboard (1 - #) or the
selection menu.
Input via selection menu

Press the
Keypad
soft key.
The selection menu appears.

Enter the data using the selection
menu (
page 193).
After you have entered the data, the
entry creation menu is displayed again.
You can select the next data field and
enter data.
New address book entry

186 ServiceAddress bookInput via 12-button keypad
Press 1 - # to enter the data
(page 195).
Ending the data input

When all data are entered, press the Back
soft key in the entry creation
menu.
The data are saved to the address
book.

In the Address book menu, select the
entry to be deleted (
page 177).

Press the
Delete
soft key.
An inquiry will appear.
Option
Yes
:

Press E.
The entry is deleted.Option
No
:

Press h to select
No
.
or

Press the
Back
soft key.
The entry is not deleted.
Deleting an address book entryiIf you delete a mobile phone internal
memory entry in the address book, the
entry is automatically also deleted from
the mobile phone internal memory.

187 Service
Address book
If the address book entry offers
appropriate data, it may be used in other
system modes such as telephone and
navigation.
Press H, h, g or G to select the
desired entry (
page 177).

Press E.
or

In the detail view (
page 178), press
E longer than 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
page 201).
The selection menu appears.
Selections appearing will depend on
the data available for a given entry. Using an address book entry to dial a
number
You can have a phone number dialed which
is saved in the address book.

Press g or G to select a phone
number.

Press E.
Dialing will begin. You can then make
your telephone call.
You will find more information in
chapter “Telephone”.Starting route guidance to an address
book entry
You can transfer an address to the
navigation system and start route
guidance.
f
Using an address book entry
in other system modes
iThis function is only available for
addresses which are saved in the
navigation system’s destination
memory (
page 155). The COMAND
saves addresses not only in the
destination memory, but at the same
time in the address book.

188 ServiceAddress book
Press g or G to select an entry
which allows route guidance
(navigation).

Press E.
The system changes to the navigation
system and calculates the route.
You will find more information in
chapter “Navigation”.iThe route is calculated with or without
traffic routes selected for the
destination (
page 120).

189 Service
Tele Aid*

Tele Aid*
Tele Aid* incorporates the following
functions:
Emergency call

Roadside Assistance

Information call

Remote Door Unlock

Stolen Vehicle RecoveryThe speaker volume of a Tele Aid call can
be adjusted using the volume control on
the COMAND (
page 98) or the æ and
ç buttons on the multifunction steering
wheel.
During a Tele Aid call, all audio sources are
muted. The telephone is turned off and no
SMS messages can be received or
transmitted.
During a Tele Aid call, the used Network
Type (“A” for analog network or “D” for
digital network) and the signal strength are
displayed on the lower right corner of the
COMAND display.An emergency call is initiated
automatically in the event emergency
tensioning devices (ETDs) or air bags are
deployed. An emergency call can also be
initiated manually by pressing the I
button. Refer to your vehicle Operator’s
Manual for additional information.
Once the emergency call is in progress, the
indicator lamp in the I button will
begin to flash. The message
Connecting
Call
appears on the display and all audio
resources are muted.
When the connection is established, the
message
Call
Connected
appears on
the display. A voice connection between
the Response Center and the vehicle
occupants is established soon after the
emergency call has been initiated.
iTo use Tele Aid*, the Tele Aid service
must be subscribed to and properly
activated. If you have any questions
regarding activation, please call
the Response Center at 1-800-756-
9018 (in the USA) or 1-888-923-8367
(in Canada).
The Tele Aid system is operational
provided the Tele Aid service was sub-
scribed to and properly activated.
Additionally, the vehicle’s battery must
be charged, properly connected, not
damaged and cellular service and GPS
coverage must be available.
General
Emergency call

193 Service
Entering data

Entering data
Sometimes you need to enter data such as
names or phone numbers.
E.g.:
New phone book entry

New address book entry
The following input types are possible:

Via selection menu

Via 12-button keypad (
page 195)The selection menu is displayed
automatically when you press the
corresponding button in a menu in which
this kind of data input is possible. The
following display may appear if you create
a new entry in the phone book.You can enter upper-case and lower-case
letters including special characters and
numbers.
The following shift fields can be used to
change the type of the characters:
= Upper case
= Lower case
= Special characters
Shifting Keys

Press h, H, g, G or F to
select the shift field .

Press E.
Input via selection menu
ABCabc. . .
abc

195 Service
Entering data
Inserting a character
Move the cursor to the desired
position.

Enter the character as described at
“Entering characters” (
page 194).
Closing the selection menu

Press the
Back
soft key.
or

Press the
Keypad
soft key.
or

Use h, H, g, G or F to select
the ( field.

Press E.
In all cases, the system enters the data.You can enter upper-case and lower-case
letters including special characters and
numbers.
Entering characters

Press * or1 - 0 to enter
characters.
Press a key once or several times in
quick succession.After you pressed the key the first time,
the character is displayed at the
bottom of the screen.
You can see which characters you can
enter with that key.
Each continuing depression of the key
displays the next character.

If required, press key #.
This key shifts from lower to upper
case.

Wait until the displayed character
disappears.
The character is entered.
Input via 12-button keypadiE.g.: Key 5
Press 1 x = J
Press 2 x = K
Press 3 x = L
Press 4 x = 5

196 ServiceEntering dataDeleting a character
Press the
Delete
soft key.
The character to the left of the cursor is
deleted.
You can also move the cursor.
Moving the cursor

Press H or h.
The cursor moves to the right or left.Inserting a character

Move the cursor to the desired
position.

Enter the character as described at
“Entering characters” (
page 194).
iTo enter a blank space, use the
on the 0 key.