seat memory MERCEDES-BENZ S CLASS 2007 User Guide

329 Controls in detailSeats
With the easy-entry/exit feature activated,
the steering wheel and driver’s seat will re-
turn to their last set memory position or a
factory-set maximum forward position
when you:

close the driver’s door with the ignition
switched on


insert the SmartKey into the starter
switch or press the KEYLESS-GO*
start/stop button (
page 317) once
with the driver’s door closed. With the easy-entry/exit feature activated
the steering wheel tilts upwards and the
driver’s seat moves a few inches to the
rear when you:


remove the SmartKey from the starter
switch,
or


open the driver’s door with the
SmartKey in starter switch position 0
or 1 or the KEYLESS-GO* start/stop
button (
page 317) in position 1.
!
Do not activate the easy-entry/exit feature
if the seat backrest is in an excessively reclined
position. Doing so could cause damage to front
or rear seats.
First move the seat backrest to an upright posi-
tion.
i
For safety reasons, the driver’s seat will not
return to its last set position with the easy-en-
try/exit feature activated if the system recogniz-
es the last set position as an extreme forward
position. Instead, the driver’s seat will remain at
or move to a factory-set maximum forward posi-
tion. To again fully return the driver’s seat toyour last set position or to memory position, ad-
just the seat to the desired position or press and
hold the respective memory position button
(
page 337).
i
The last set driver’s seat and steering wheel
positions are stored when


the ignition is switched off


the position is stored in memory
(page 336)
i
If the current position for the steering wheel
is in the uppermost tilt position, the steering
wheel will no longer be able to move upward
when the easy-entry/exit feature is activated.
If the current seat position falls into a factory-set
position range and the system recognizes the
current seat position to be rearward enough for
easy entry and exit, the driver’s seat will not
move to the rear when the easy-entry/ exit fea-
ture is activated.
The adjustment procedure is briefly interrupted
when the engine is started.Warning!
G
Let the system complete the adjustment
procedure before setting the vehicle in mo-
tion. All driver’s seat and steering wheel ad-
justments must be completed before setting
the vehicle in motion. Driving off with the
driver’s seat/steering wheel still adjusting
could cause the driver to lose control of the
vehicle.

330 Controls in detailSteering wheel
Steering wheel adjustment
1Adjusting steering column, in or out
2Adjusting steering column, up or down
Switch on the ignition (
page 315) or
open the driver’s door.

Adjusting steering column in or out:
Move stalk forward or back in the direc-
tion of arrow1 until a comfortable
steering wheel position is reached with
your arms slightly bent at the elbow.

Adjusting steering column up or
down: Move the stalk up or down in the
direction of arrow2.
Make sure your legs can move freely
and all the displays (incl. malfunction
and indicator lamps) on the instrument
cluster are clearly visible.
Warning!
G
Do not adjust the steering wheel while driv-
ing. Adjusting the steering wheel while driv-
ing could cause the driver to lose control of
the vehicle.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle.
Even with the SmartKey or SmartKey with
KEYLESS-GO* removed from the starter
switch or the SmartKey with KEYLESS-GO*
removed from the vehicle, the steering
wheel adjustment feature can be operated
when the driver’s door is open. Therefore,
do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment may
cause an accident and/or serious personal
injury.
i
The memory function (
page 336) lets you
store settings for the steering wheel together
with the settings for the exterior rear view mir-
rors and the seat positions.

333 Controls in detail
Mirrors
Power folding exterior rear view mir-rors
Folding exterior rear view mirrors in
and out automatically
When the corresponding function in the
COMAND system is activated
(page 222):


The exterior rear view mirrors automat-
ically fold in as soon as the vehicle is
locked from the outside.


The exterior rear view mirrors automat-
ically fold out as soon as the vehicle is
unlocked and the driver’s or front pas-
senger door are subsequently opened.Folding exterior rear view mirrors in
and out manually
The exterior rear view mirrors can vibrate if
they are not folded out completely.
1Folds the exterior mirrors in and out

Switch on the ignition (
page 315).

Folding in: Press button1.

Folding out: Press button1 again.
i
When you press button1 for the first time,
the exterior mirror on the driver’s side is always
selected.
If you do not make adjustments to the selected
exterior rear view mirror within 15 seconds, the
indicator lamp goes out. You will then have to se-
lect the desired exterior rear view mirror again
before any adjustments can be made. Adjust-
ments can only be made with the indicator lamp
for the respective exterior rear view mirror but-
ton illuminated.
i
At low ambient temperatures, the exterior
rear view mirrors will be heated automatically.
i
The memory function (
page 336) lets you
store the setting for the exterior rear view mir-
rors together with the setting for the steering
wheel and the seat positions.
!
Before driving the vehicle through an auto-
matic car wash, fold the exterior mirrors in. Oth-
erwise they may get damaged.
i
The mirrors do not fold out if they were pre-
viously folded in manually.
i
If you are driving at more than approximately
9 mph (15 km/h), you will not be able to fold the
exterior mirrors in.


336 Controls in detailMemory functionPrior to operating the vehicle, the driver
should check and adjust the seat height,
seat position fore and aft, and seat back-
rest angle if necessary, to ensure adequate
control, reach, and comfort. The head re-
straint should also be adjusted for proper
height. See also the section on air bags
(page 45) for proper seat positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, operation
and comfort. Both the inside and outside
rear view mirrors should be adjusted for
adequate rear vision.
Fasten seat belts. Infants and small chil-
dren should be seated in a properly se-
cured restraint system that complies with
U.S. Federal Motor Vehicle Safety Stan-
dards 213 and 225 and Canadian Motor
Vehicle Safety Standards 213 and 210.2.With the memory function you can store up
to 3 different settings.
The following settings are saved for each
stored position the driver’s door:


Seat position and lumbar support


Multicontour seat*: previously select-
ed setting


Drive-dynamic multicontour seat*: ac-
tivation/deactivation


Steering wheel position


Exterior rear view mirrors position
The following settings are stored when us-
ing the buttons on the front passenger
door:


Seat position and lumbar support


Multicontour seat*: previously select-
ed setting


Drive-dynamic multicontour seat*: ac-
tivation/deactivationThe following settings are stored when us-
ing the buttons* on the rear passenger
doors (Canada only):


Seat position


Multicontour seat*: previously select-
ed settingWarning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.

337 Controls in detail
Memory function
The memory button and stored position
buttons are located on the door control
panel.
MMemory button
1 2 3Memory position buttons
Switch on the ignition (
page 315).
or

Open the respective door.
Storing positions into memory
Adjust the seat (
page 318) to the de-
sired position.

On the driver’s side: adjust the steering
wheel (
page 330) and the exterior
rear view mirrors (
page 332) to the
desired position.

Press memory buttonM.

Release memory buttonM and push
one of the position buttons within
3 seconds.
All the settings are stored with the se-
lected position.
Recalling positions from memory
Press and hold one of the position
buttons until the seat, steering wheel
and exterior rear view mirrors have fully
moved to the stored positions.
!
Do not operate the power seats using the
memory button if the seat backrest is in an ex-
cessively reclined position. Doing so could cause
damage to front or rear seats.
First move seat backrest to an upright position.
i
Releasing the button immediately stops
movement to the stored positions.
The multicontour seat* and/or lumbar support
will continue to be adjusted.

674 Technical termsInstrument cluster
The displays and indicator/warning
lamps in the driver’s field of vision, in-
cluding the tachometer, speedometer,
engine temperature and fuel gauge.
ISO9660
A standard file system for recording
data on CDs.
Joliet
Standard for recording data on CDs; an
extension of ISO 9660.
KEYLESS-GO*
System for entering and operating the
vehicle without the use of a SmartKey.
Kickdown
Depressing the accelerator past the
point of resistance shifts the transmis-
sion down to the lowest possible gear.
This very quickly accelerates the vehi-
cle and should not be used for normal
acceleration needs.Kilopascal (kPa)
(
page 527)
LED
(Light E
mitting D
iode)
Semiconductor element that converts
electricity directly into light.
Line of fall
The direct line that an object moves
downhill when influenced by the force
of gravity alone.
LOGIC7
® surround
Multichannel surround technology
from the professional audio industry
that plays back 5.1 and stereo record-
ings in surround sound. LOGIC7
® cre-
ates a natural 360° sound experience
on all seats.
Locking knob
Knob on the door which indicates
whether the door is locked or un-
locked. Pushing the locking knob down
on an individual door from inside will
lock that door.Maintenance System (U.S. vehicles)
Maintenance service indicator in the
->multifunction display that informs the
driver when the next vehicle mainte-
nance service is due. The Maintenance
System in your vehicle tracks distance
driven and the time elapsed since your
last maintenance service, and calls for
the next maintenance service accord-
ingly.
Maximum load rating
(
page 527)
Maximum loaded vehicle weight
(page 527)
Maximum tire inflation pressure
(page 527)
Memory function
Used to store three individual seat,
steering wheel and exterior mirror posi-
tions.

682 IndexChildren in the vehicle 61
Air bags 61
Indicator lamp front passenger front air
bag off 53, 555
Indicator lamp, front passenger front
air bag off 53
Infant and child restraint systems 62
LATCH-type child seat anchors 65
Override switch for rear passenger
compartment 67
Tether attachment points 64
Cigarette lighter 457
Cloth upholstery, Cleaning and care
of 542
Cockpit 26, 671
Cockpit management and data system see
COMAND
COMAND 671
Adjusting volume 89
Components 79
Controller 82
Display 80
Function buttons 80
Main menus 89
Menu overview 84
Navigation system 140Operating 84
Operating safety 78
Operating seats 236
Phone book* 129
Radio, FM/AM 93
Selecting sound settings 90
SMS messages 137
Surround sound 91
Switching off/on the audio
source 92
Switching on or off 79
Swiveling display 81
system settings 213
Telephone keypad* 82
Telephone menu* 115
Vehicle menu 220
Voice Control* settings 215
Combination switch 346
Corner-illuminating lamps 347
High beam 346
High beam flasher 347
Turn signals 362
Windshield wipers 351
Command list (Voice Control*) 288
Address book commands 293
Audio commands 295General commands 288
Navigation commands 290
Telephone* commands 289
Control system instrument cluster 241
Multifunction display 241
Multifunction steering wheel 242
Control system instrument cluster menus
Assistance* 252
Audio 248
Navi 246
Service 253
Settings 254
Telephone* 249
Trip 245
Vehicle status message memory 253
Controller Area Network see CAN system
Coolant 497
Adding 498
Anticorrosion/antifreeze mixing ratio
and quantity 665
Checking level 497
Messages in display 587
Temperature 488
Temperature gauge 29, 378
Coolant level
Checking 497

683 Index
Corner-illuminating lamps 347
Courtesy lighting 350
Cruise control 380, 671
Activating 381
Canceling 382
Driving downhill 382
Driving uphill 382
Message in display 559
Setting current speed 381
Setting to last stored speed (“Resume”
function) 384
Cup holder
Cleaning 541
In front seat armrest 452
In rear seat armrest 452
Curb weight 526, 671
Customer Assistance Center see CAC
D
Date
Setting (COMAND) 214
Daytime running lamp mode 344
Deceleration
With DISTRONIC Plus* 388
Deep water see Standing water
Defrosting 429Delayed switch-off
Exterior lighting (COMAND) 220
Interior lighting (COMAND) 226
Department of Transportation see DOT
Destination entry (COMAND) 153
Destination memory (COMAND) 195
Difficulties
While driving 362
While starting 360
Digital speedometer 246
Additional speedometer 255
Dimensions, Vehicle 660
Direction of rotation, Tires 503
Displays
Additional speedometer 255
Digital speedometer 246
DISTRONIC Plus* 387
Maintenance service indicator 532
Multifunction display 241
Vehicle status message see Multifunc-
tion display messages
Distance
Decreasing in DISTRONIC Plus* 397
Increasing in DISTRONIC Plus* 396
Setting in DISTRONIC Plus* 396
Distance to Empty (Range) 246Distance warning function*
Activating 397
Deactivating 397
Distance warning lamp 397
Intermittent warning sound 397
DISTRONIC Plus* 385
Activated 389
Activating 390
Calling up settings 389
Cleaning system sensor 537
Deactivated 389
Deactivating 395
Deceleration 388
Decreasing distance 397
Decreasing time interval 396
Displays in the speedometer dial 387
Distance warning function 397
Driving hints 397
Increasing distance 396
Increasing time interval 396
Intermittent signal tone 388
Lever 390
Menu 389
Messages in display 560
Sensor cover 537
Setting a higher speed 393

690 IndexLoss of
Key, Mechanical 311
Key, SmartKey 311
Key, SmartKey with
KEYLESS-GO* 311
Service and Warranty Information
Booklet 651
Low beam headlamps
Replacing bulbs 622
Lowering
Vehicle 633
Lubricants 661
Lumbar support (COMAND) 237
M
Maintenance 15, 532
Automatic Call (Tele Aid) 469
Calling up service indicator
display 533
Clearing service indicator
message 532
FSS (Canada vehicles) 532
Maintenance System
(U.S. vehicles) 532
Resetting service indicator 533
Service indicator message 532
Service term exceeded 533Maintenance System (U.S. vehicles) 674
Maintenance System (U.S. vehicles) 532
Manual headlamp mode 343
MAXCOOL
Maximum cooling 430
Maximum load rating, Tires 527
Maximum loaded vehicle weight 509,
510, 527
Maximum tire inflation pressure 523,
527
Maximum tire load rating 523
Memory function 336
Messages in display see Multifunction dis-
play messages
Microphone, Hands-free 37
Minispare wheel 613, 658
Mounting 629
Mirrors
Activating exterior rear view mirror
parking position 335
Adjusting 332
Auto-dimming for rear view
mirrors 334
Exterior rear view mirrors 332
Interior rear view mirror 332
Mobile phone see Telephone*Modifications and alterations, Operating
safety 19
MON 490, 662
Motor Octane Number see MON
MP3
Menu overview (COMAND) 110
Operation (COMAND) 111
Playback options (COMAND) 114
Selecting a folder (COMAND) 113
Selecting a medium (COMAND) 112
Selecting a track (COMAND) 113
MP3 (COMAND) 104
Multicontour rear seats* 327
Multicontour seats*, front
Adjusting (COMAND) 237
Multifunction display 241, 675
Multifunction display messages
ABC* 570
ABS 572
Airmatic 585
Batteries, vehicle 586
Brake fluid 573
Brake pads 575
Check engine 547
Coolant 588
Coolant level 587

695 Index
Seat belts 55
Children in the vehicle 61
Cleaning 542
Fastening 55, 339
Force limiter 58
Messages in display 605
Proper use of 57, 341
Safety guidelines 47
Telltale 29, 55, 550
Seating capacity 505
Seats 318
adjusting front passenger seat from
driver’s seat 321
Adjustment 318
Drive-dynamic multicontour* in the
front, Adjusting (COMAND) 240
Easy entry/exit feature 328
Folding back and placing upright rear
head restraints 325
Head restraints 324
Lumbar support (COMAND) 237
Memory function 336
Multicontour* in the front, Adjusting
(COMAND) 237
Operating via COMAND 236Setting front passenger seat position
from rear 321
Ventilation* 323
Seats*
Heating 322
Securing cargo
Cargo tie-down hooks 453
Selector lever
Lock 359
Selector lever see Gear selector lever
Self-test
OCS 54
Tele Aid 462
Service and warranty information 14
Service intervals see Maintenance service
indicator
Service life, Tires 501
Service see Maintenance
Service system see FSS (Canada vehicles)
or Maintenance System (U.S. vehicles)
Service, Parts 650
Setting
Cruise control 381
DISTRONIC Plus* time interval 396
Following distance in DISTRONIC
Plus* 396Higher speed in cruise control 383
Higher speed in DISTRONIC
Plus* 393
Lower speed in cruise control 383
Lower speed in DISTRONIC
Plus* 394
Slower speed in cruise control 383
Slower speed in DISTRONIC
Plus* 394
Speed in DISTRONIC Plus* 393
Suspension tuning (ABC*) 403
Temperature (interior) 429
Temperature (rear passenger
compartment) 435
To last stored speed (“Resume” func-
tion) in cruise control 384
To last stored speed in DISTRONIC
Plus* (“Resume” function) 395
Vehicle level control (ABC*) 403
Setting current speed 381
Settings
Calling up DISTRONIC Plus* 389
Control system instrument cluster
menus 254
Resetting trip odometer 246