garage door opener MERCEDES-BENZ S-Class 2015 W222 Owner's Manual

MOExtended tires .......................... 423
Preparing the vehicle ..................... 423
TIREFIT kit ...................................... 424
Floormats ...........................................4 01
Folding table ...................................... 376
Front-passenger seat
Adjusting from the driver's seat ..... 124
Adjusting from the rear compart-
ment .............................................. 124
Fuel
Additives ........................................ 491
Consumption statistics .................. 300
Displaying the current consump-
tion ................................................ 299
Displaying the range ..................... .299
Driving tips ................................... .224
Fuel gauge ....................................... 35
Grade (gasoline) ............................ 490
Important safety notes .................. 490
Problem (malfunction) ................... 209
Refueling ........................................ 205
Tank content/reserve fuel ............. 490
Fuel filler flap
Opening ......................................... 207
Opening (PLUG-IN HYBRID vehi-
cles) ............................................... 207
Fuel level
Calling up the range (on-board
computer) ...................................... 299
Fuel tank
Capacity ........................................ 490
Problem (malfunction) ................... 209
Fuses
Allocation chart ............................ .440
Before changing ............................ .438
Dashboard fuse box ....................... 439
Engine emergency stop ................. 440
Fuse box in the engine compart-
ment .............................................. 439
Fuse box in the front-passenger
footwell .......................................... 439
Fuse box in the trunk ..................... 440
Important safety notes .................. 438 G
Garage door opener Clearing the memory ..................... 401 General notes ................................ 397
Important safety notes .................. 398
Opening/closing the garage door .. 400
Programming (button in the rear-
view mirror) ................................... 398
Synchronizing the rolling code ....... 399
Gasoline ............................................. 490
Gear indicator (on-board com-
puter) ................................................. .314
Genuine parts ...................................... 24
Glove box .......................................... .373 H
Handbrake see Parking brake
HANDS-FREE ACCESS ....................... 102
Hazard warning lamps ......................152
Head bags
Display message ............................ 330
Head restraints
Adjusting ....................................... 131
Adjusting (manually) ..................... .131
Adjusting (rear) .............................. 133
EASY ADJUST luxury head
restraint ......................................... 132
Luxury ............................................ 132
Supplementary cushion ................. 133
Head-up display
Adjusting the brightness ................ 312
Function/notes ............................ .297
Important safety notes .................. 297
Setting the position ....................... 311
Switching on or off ......................... 297
Switching the display on/off ......... 311
Headlamps
Fogging up ..................................... 155
see Automatic headlamp mode
Heating
see Climate control
High beam flasher .............................152
High-beam headlamps
Adaptive Highbeam Assist PLUS .... 153
Display message ............................ 334
Switching on/off ........................... 152
High-voltage battery
Battery care ................................... 211
Charging (charging station) ............ 216 Index
11

RBS (Recuperative Brake System)
Warning lamp ................................. 366
Reading lamp ..................................... 155
Rear compartment
Activating/deactivating climate
control ........................................... 169
Setting the air distribution ............. 174
Setting the air vents ...................... 185
Setting the airflow ......................... 174
Setting the temperature ................ 173
Stowage compartment .................. 374
Rear lamps
see Lights
Rear seats
Adjusting ....................................... 123
Adjusting a rear reclining seat ....... 123
Overview .......................................... 43
Setting the reclined position .......... 123
Rear view camera
Cleaning instructions ..................... 416
Function/notes ............................ .256
Switching on/off ........................... 257
Rear window blind ............................ 381
Rear window defroster
Problem (malfunction) ................... 177
Switching on/off ........................... 176
Rear-view mirror
Anti-glare (manual) ........................ 140
Dipping (automatic) ....................... 142
Recuperation display ........................ 299
Recuperative Brake System
Driving safety systems ..................... 48
Important safety notes .................... 48
Refrigerant (air-conditioning sys-
tem)
Important safety notes .................. 494
Refueling
Fuel gauge ....................................... 35
Important safety notes .................. 205
Refueling process .......................... 206
see Fuel
Remote control
Garage door opene r....................... 397
Programming (garage door
opener) .......................................... 398
Replacing bulbs
General notes ................................ 157
Reporting safety defects .................... 30Rescue card
......................................... 30
Reserve (fuel tank)
see Fuel
Reserve fuel
Display message ............................ 339
Warning lamp ................................. 363
Residual heat (climate control) ........ 177
Restraint system
Display message ............................ 328
Introduction ..................................... 49
Warning lamp ................................. 362
Warning lamp (function) ................... 50
Reversing feature
Panorama sliding sunroo f.............. 111
Roller sunblind s............................. 112
Side windows ................................. 106
Trunk lid ......................................... 100
Reversing lamps (display mes-
sage) ................................................... 335
ROAD SURFACE SCAN ....................... 245
Roadside Assistance (breakdown) .... 26
Roller sunblind
Panorama roof with power tilt/
sliding panel .................................. 112
Rear side window s......................... 381
Rear window .................................. 381
Roller sunblind of the panorama
roof with power tilt/sliding panel
Operating (front roller sunblind) .... 113
Operating (rear roller sunblind )...... 113
Roof carrier ........................................ 377
Roof lining and carpets (cleaning
guidelines) ......................................... 419
Roof load (maximum) ........................ 495 S
Safety Occupant Classification System
(OCS) ............................................... 59
see Operating safety
Safety notes
Hybrid vehicles ................................ 46
Safety system
see Driving safety systems
Seat
Multicontour seat in the rear com-partment ........................................ 134 Index
17

Overhead control panel
Function Page
:
p
Switches the left-
hand reading lamp on/off 155
;
|
Switches the auto-
matic interior lighting con-
trol on/off 155
=
G
SOS button (mbrace
system) 391
?
c
Switches the front
interior lighting on/off 155
A
u
Switches the rear
interior lighting on/off 155
B
p
Switches the right-
hand reading lamp on/off 155
C
ï
MB Info call button
(mbrace system) 393
D
Eyeglasses compartment 373
E
3
Opens/closes the
panorama roof with power
tilt/sliding panel 111
Opens/closes the front
roller sunblinds
113 Function Page
F
µ
Operates MAGIC SKY
CONTROL 114
Opens/closes the rear
roller sunblind
113
G
Buttons for the garage door
opener 398
H
Microphone for mbrace
(emergency call system),
telephone and the Voice
Control System; see the
separate operating instruc-
tions
I
F
Roadside Assistance
call button (mbrace sys-
tem) 392Overhead control panel
41At a glance

Information on the data stored in the vehicle
(Y page 30).
Information on Roadside Assistance
(Y page 26).
Downloading routes Downloading routes allows you to transfer
and save predefined routes in the navigation
system.
A route can be prepared and sent by either a
customer service representative or under
"Owners Online" at http://www.mbusa.com.
Each route can include up to four way points. Once a route has been received by the navi-
gation system, you will see the External
External
route "Route name" has been saved
route "Route name" has been saved
under "Last destinations". Start
under "Last destinations". Start
navigation?
navigation? message on the COMAND dis-
play.
The route is saved.
X To start route guidance: selectYes
Yes.
An overview of the route is shown in the
display.
If you select No Nothe saved route can be
called up later in the navigation menu.
X Select Start
Start.
Route guidance is started.
Downloaded and saved routes can be called
up again.
You can find further information in the sepa-
rate COMAND/Audio 20 operating instruc-
tions.
Speed alert You can define the upper speed limit, which
must not be exceeded by the vehicle.
If this selected speed is exceeded by the vehi-
cle, a message will be sent to the Customer
Assistance Center. The Customer Assistance Center then forwards this information to you.
You can select the way in which you receive
this information beforehand. Possible options include text message, e-mail or an automated
call. The data you receive contains the following
information:
R the location where the speed limit was
exceeded
R the time at which the speed limit was
exceeded
R the selected speed limit which was excee-
ded
Geo fencing Geo fencing allows you to select areas which
the vehicle should not enter or leave. You will
be informed if the vehicle crosses the boun-
daries of the selected areas. You can select
the way in which you receive this information beforehand. Possible options include text
message, e-mail or an automated call.
The area can be determined as either a circle
or a polygon with a maximum of ten corners.
You can specify up to ten areas simultane-
ously. Different settings are possible for each area.
These settings can be called up under "Own-
ers Online" at http://www.mbusa.com.
Alternatively, you can trigger an MB Info call
and inform the customer service representa-
tive that you wish to activate geo fencing.
Currently inactive areas can be activated by
text message.
Triggering the vehicle alarm With this function, you can trigger the vehi-
cle's panic alarm via text message. An alarm
sounds and the exterior lighting flashes.
Depending on the setting, the panic alarm
lasts five or ten seconds. Afterwards, the
alarm switches off.
Garage door opener
General notes The HomeLink
®
garage door opener integra-
ted in the rear-view mirror allows you to oper- Features
397Stowage and features Z

ate up to three different door and gate sys-
tems.
Use the integrated garage door opener only
on garage doors that:
R have safety stop and reverse features and
R meet current U.S. federal safety standards
Once programed, the integrated garage door opener in the rear-view mirror will assume the
function of the garage door system's remote
control. Please also read the operating
instructions for the garage door system.
When programming a garage door opener,
park the vehicle outside the garage. Do not
run the engine while programming.
Certain garage door drives are incompatible
with the integrated garage door opener. If you have difficulty programing the integrated
garage door opener, contact an authorized
Mercedes-Benz Center.
Alternatively, you can call the following tele-
phone assistance services:
R USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
R Canada: Customer Service at
1-800-387-0100
R HomeLink ®
hotline 1-800-355-3515 (free
of charge)
More information on HomeLink ®
and/or
compatible products is also available online
at http://www.homelink.com.
Notes on the declaration of conformity
(Y page 28).
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
Important safety notes G
WARNING
When you operate or program the garage door with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury. When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming Programming buttons
Pay attention to the "Important safety notes"
(Y page 398). Garage door remote control
Ais not inclu-
ded with the integrated garage door opener.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 189).
X Select one of buttons ;to? to use to
control the garage door drive.
X To start programming mode: press and
hold one of buttons ;to? on the inte-
grated garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp :lights up yellow.
Indicator lamp :lights up yellow as soon
as button ;,=or? is programmed for
the first time. If the selected button has
already been programmed, indicator 398
FeaturesStowage and features

lamp
:will only light up yellow after ten
seconds have elapsed.
X Release button ;,=or?. Indicator
lamp :flashes yellow.
X To program the remote control: point
garage door remote control Atowards
buttons ;to? on the rear-view mirror at
a distance of 2 to 8 inches (5 to 20 cm).
X Press and hold button Bon remote control
A until indicator lamp :lights up green.
When indicator lamp :lights up green:
programming is finished.
When indicator lamp :flashes green: pro-
gramming was successful. The next step is to synchronize the rolling code
(Y page 399).
X Release button Bon remote control Afor
the garage door drive system.
If indicator lamp :lights up red: repeat the
programing procedure for the correspond-
ing button on the rear-view mirror. When
doing so, vary the distance between remote control Aand the rear-view mirror.
The required distance between remote
control Aand the integrated garage door
opener depends on the garage door drive
system. Several attempts might be neces-
sary. You should test every position for at
least 25 seconds before trying another
position.
Synchronizing the rolling code
Pay attention to the "Important safety notes"
(Y page 398).
If the garage door system uses a rolling code, you will also have to synchronize the garage
door system with the integrated garage door
opener in the rear-view mirror. To do this you
will need to use the programming button on
the door drive control panel. The program-
ming button may be positioned at different
locations depending on the manufacturer. It
is usually located on the door drive unit on the
garage ceiling.
Familiarize yourself with the garage door
drive operating instructions, e.g. under "Pro- gramming of additional remote controls",
before carrying out the following steps.
Your vehicle must be within reach of the
garage door or gate opener drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 189).
X Get out of the vehicle.
X Press the programming button on the door
drive unit.
Usually, you now have 30 seconds to ini-
tiate the next step.
X Get into the vehicle.
X Press previously programmed button ;,
= or? on the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete.
Notes on programming the remote con-
trol
Canadian radio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds. Therefore, these signals may not last long
enough for the integrated garage door
opener. The signal is not recognized during
programming. Comparable with Canadian
law, some U.S. garage door openers also fea-
ture a "break".
Proceed as follows:
R if you live in Canada
R if you have difficulties programming the
garage door opener (regardless of where
you live) when using the programming
steps
X Press and hold one of buttons ;to? on
the integrated garage door opener.
After a short time, indicator lamp :lights
up yellow.
X Release the button.
Indicator lamp :flashes yellow. Features
399Stowage and features Z

X
Press button Bof garage door remote
control Afor two seconds, then release it
for two seconds.
X Press button Bagain for two seconds.
X Repeat this sequence on button Bof
remote control Auntil indicator lamp :
lights up green.
When indicator lamp :lights up green:
programming is finished.
When indicator lamp :flashes green: pro-
gramming was successful. The next step is to synchronize the rolling code.
X Release button Bof remote control Aof
the garage door drive.
If indicator lamp :lights up red: repeat the
programming process for the correspond-
ing button on the rear-view mirror. When
doing so, vary the distance between remote
control Aand the rear-view mirror.
The required distance between remote
control Aand the integrated garage door
opener depends on the garage door drive
system. Several attempts might be neces-
sary. You should test every position for at
least 25 seconds before trying another
position.
Problems when programming
If you are experiencing problems programing
the integrated garage door opener on the
rear-view mirror, take note of the following
instructions:
R Check the transmitter frequency used by
garage door drive remote control Aand
whether it is supported. The transmitter
frequency can usually be found on the back
of the garage door drive remote control.
The integrated garage door opener is com- patible with devices that have units which
operate in the frequency range of 280 to
433 MHz.
R Replace the batteries in garage door
remote control A. This increases the like-
lihood that garage door remote control A
will transmit a strong and precise signal to
the integrated garage door opener. R
When programming, hold remote control
A at varying distances and angles from the
button which you are programming. Try var- ious angles at a distance between 2and
12 inches (5to 30 cm) or at the same angle
but at varying distances.
R If another remote control is available for the
same garage door drive, repeat the same
programming steps with this remote con-
trol. Before performing these steps, make
sure that new batteries have been installed in garage door drive remote control A.
R Note that some remote controls only trans-
mit for a limited amount of time (the indi-
cator lamp on the remote control goes out). Press button Bon remote control Aagain
before transmission ends.
R Align the antenna cable of the garage door
opener unit. This can improve signal recep- tion/transmission.
Opening/closing the garage door After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control.
Please also read the operating instructions
for the garage door system.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 189).
X Press button ;,=or? which you have
programmed to operate the garage door.
Garage door system with a fixed code: indi-
cator lamp :lights up green.
Garage door system with a rolling code:
indicator lamp :flashes green.
The transmitter will transmit a signal as
long as the button is pressed. The trans-
mission is halted after a maximum of ten
seconds and indicator lamp :lights up
yellow.
X Press button ;,=or? again if neces-
sary. 400
FeaturesStowage and features

Clearing the memory
Make sure that you clear the memory of the
integrated garage door opener before selling
the vehicle.
X Turn the SmartKey to position 2in the igni-
tion lock (Y page 189).
X Press and hold buttons ;and ?.
The indicator lamp initially lights up yellow
and then green.
X Release buttons ;and ?.
The memory of the integrated garage door
opener in the rear-view mirror is cleared. Floormats
G
WARNING
Objects in the driver's footwell can restrict the pedal travel or obstruct a depressed pedal.
The operating and road safety of the vehicle is
jeopardized. There is a risk of an accident.
Make sure that all objects in the vehicle are
stowed correctly, and that they cannot enter
the driver's footwell. Install the floormats
securely and as specified in order to ensure
sufficient clearance for the pedals. Do not use loose floormats and do not place floormats on
top of one another. X
Driver's seat/front-passenger seat:
slide the respective seat back.
X Rear seats: slide the respective seat for-
wards.
X To install: place the floormat in the foot-
well. X
Press studs :onto retainers ;until you
hear them engage.
X To remove: pull the floormat from retain-
ers ;.
X Remove the floormat. Infrared reflective windshield
The infrared reflecting glass prevents the
vehicle interior from becoming too hot. It also
blocks radio waves up into the gigahertz
range.
In order to operate radio-controlled equip-
ment, e.g. toll systems, areas :on the wind-
shield are permeable to radio waves. You can install radio-controlled devices in these
areas.
These areas can best be seen from outside
the vehicle by observing the light reflected off the windshield. Features
401Stowage and features Z