engine MERCEDES-BENZ S-Class MAYBACH 2017 W222 Comand Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2017, Model line: S-Class MAYBACH, Model: MERCEDES-BENZ S-Class MAYBACH 2017 W222Pages: 230, PDF Size: 8.27 MB
Page 55 of 230
The panel heating function warms the surfaces
with which the vehicle occupants frequently
come into contact. Activation of the panel heat-
ing via the multimedia system as described
below only works if seat heating is activated (see
the vehicle Operator's Manual).
XCall upVehicle Settings(Ypage 51).
XTo select PanelHeating: turn and press the
controller.
XTo change the setting: turn the controller.
Activating/deactivating the acoustic
locking verification signal
You can also set an audible signal to confirm
that the vehicle has been locked.
XCall up Vehicle Settings(Ypage 51).
XTo select Acoustic Lock Feedback: turn
and press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information on the locking
feature in the vehicle Operator's Manual.
Switching the seat belt adjustment
on/off
The seat-belt adjustment function adjusts the
driver's and front-passenger seat belt to the
upper body of the occupants.
XCall up Vehicle Settings(Ypage 51).
XTo select Belt Adjustment: turn and press
the controller.
The function switches on or off, depending on
the previous setting.
You can find further information in the vehicle
Operator's Manual.
Switching the automatic mirror fold-
ing function on/off
When the Automatic Mirror Foldingfunc-
tion is activated, the outside mirrors fold in auto-
matically as soon as you lock the vehicle from
the outside. The outside mirrors fold out auto-
matically again as soon as you unlock the vehi-
cle.
XCall up Vehicle Settings(Ypage 51).
XTo select Automatic Mirror Folding: turn
and press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information in the vehicle
Operator's Manual.
Switching locator lighting on/off
If you switch on the Locator Lightingfunc-
tion, the exterior lighting is switched on for a
short time when it is dark. The light switch must
be set to Ã.
The exterior lighting remains on for 40 seconds
after the vehicle is unlocked. When you start the
engine, the locator lighting is switched off and
the automatic driving lights are activated.
Vehicle settings53
Vehicle functions
Z
Page 56 of 230
You can find further information on the auto-
matic headlamp mode in the vehicle Operator's
Manual.
Switching locator lighting on/off
XCall upVehicle Settings(Ypage 51).
XTo select LocatorLighting: turn and press
the controller.
The function switches on or off, depending on
the previous setting.
You can find further information in the vehicle
Operator's Manual.
Activating/deactivating the auto-
matic door locking mechanism
When the automatic locking feature is switched
on, the vehicle is locked automatically when the
ignition is switched on and the vehicle is travel-
ing faster than walking pace.
XCall up Vehicle Settings(Ypage 51).
XTo select Automatic Locking: turn and
press the controller.
The function switches on or off, depending on
the previous setting.
You can find further information in the vehicle
Operator's Manual.
Setting the switch-off delay time
Interior lighting switch-off delay time
The interior lighting is activated for the duration
of the switch-off delay time when the SmartKey
is removed from the ignition lock.
XCall up Vehicle Settings(Ypage 51).
XTo select Interior Lighting DelayedSwitch-off: turn and press the controller.
The setting element is active.
XTo change the switch-off delay time: turn the
controller.
You can find further information in the vehicle
Operator's Manual.
Exterior lighting switch-off delay time
If you switch on the Exterior LightingDelayed Switch-offfunction, the exterior
lighting is switched on for a short time after the
engine is switched off. The light switch must be
set to Ã.
The duration of the exterior lighting delayed
switch-off time can be adjusted individually. The
exterior lighting remains on for the maximum
duration of 60 seconds after the engine is
switched off. If you close all the doors and the
tailgate, the exterior lighting switches off after
the set time.
54Vehicle settings
Vehicle functions
Page 88 of 230
XTo return to the menu: press the%button.
XTo place a call to the personal POI: select
Call
.
If a mobile phone is connected to the multi-
media system and the telephone number is
available, the call is connected (
Ypage 120).
XTo change the name and symbol: select
Edit
.
XSelect Change NameorEdit Icon.
XTo change name: enter character (Ypage 34).
XTo change symbol: select a symbol.
The symbol is saved.
XTo delete a personal POI or route: select
Delete
.
A prompt will appear.
XSelect YesorNo.
If you select Yes, the personal destination or
personal route is deleted.
XTo select the outward and return route:
select Swap
.
The starting and destination positions of your
personal route, and thus the direction for
route guidance, are switched round. One-way
streets or restricted intersections are taken
into consideration. Therefore, the outward
and return routes may differ from each other.
XTo save a personal POI: selectSave.
XContinue saving (Ypage 99).
XTo start route guidance: selectStart.
Recording the route
General notes
Routes are recorded using the SD card.
Requirements: the SD card has the FAT data
system format (e.g. FAT32).
When recording the route, bear in mind the fol-
lowing:
RIf the SD card is inserted, it must not be
removed during recording.
RIf route recording is started manually, it must
be finished manually before the multimedia
system is switched off (e. g. when the engine
is switched off).
RThe multimedia system minimizes the num-
ber of route points recorded. Therefore when
the recorded route is subsequently com-
menced, it may differ from the route that was
originally recorded.
Starting/finishing route recording
XInsert the SD memory card (Ypage 170).
XTo switch to navigation mode: press the
ß button.
XTo show the menu: slide6the controller.
XTo select Destination: turn and press the
controller.
XSelect From Memory Card.
XSelectStart Route Recording.
The route is recorded and REC appears at the
bottom edge of the screen.
XTo stop recording, select End RouteRecordingfrom the menu.
The route is stored under Personal Routes.
Displaying/editing the recorded route
XInsert the SD memory card (Ypage 170).
XTo switch to navigation mode: press the
ß button.
XTo show the menu: slide6the controller.
XTo select Destination: turn and press the
controller.
XSelect From Memory Card.
XSelectPersonal Routes.
Previously recorded routes are displayed.
XTo select a route: turn and press the control-
ler.
The map appears with a menu. The recorded
route is shown on the map in blue.
XTo start route calculation: selectStart.
XTo change the name and symbol: select
Edit
.
XSelect Change NameorEdit Icon.
XTo change name: enter character (Ypage 34).
XTo change symbol: select a symbol.
The symbol is saved.
Route guidance
General notes
The multimedia system calculates the route to
the destination without taking account of the
following, for example:
Rtraffic lights
Rstop and yield signs
Rparking or stopping restrictions
86Route guidance
Navigation
Page 93 of 230
Display mode:while driving on the highway, gas stations, rest stops, rest areas and highway exits
are displayed along with their immediate distances from the current vehicle position.
Highway information facilitates route guidance to a POI (e. g. rest stops, highway exits) and use of
th e traffic jam function. The remaining route on the highway in this case is blocked in the direction
of travel from the selected exit.
XTo call up th e selection mode: while displayingthe highway information, slide 9thecon-
troller.
The marker is on the highway information. The associated position is marked on the map.
XTo start route guidance and use additional functions: select a POI by turningand pressing the
controller.
The POI details are displayed.
The POI can now be:
RStore in th e address book (Ypage 99)
RView on the map (Ypage 83)
RCall if a phone is connected and a phone number is available (Ypage 120)
RSelect for route guidance and calculat earoute to it (Ypage 74)
XTo use thetraffic ja m function: selectDetourby turning and pressing th econtroller.
The traffic jam function appear s(Ypage 95).
Navigation announcements
Repeating navigation announcements
If you missed the current navigation announce-
ment, you can call it up again.
XTo switch to navigation mode: press the
Ø button.
XTo sho wthemenu: slide6thecontroller.
XTo select+: turn and press thecontroller.
iIf th eRepeat Spoken Drivin gRecom‐mendation sfunction has previously been
added as a favorite, you can alternatively
select th e function using thefavorite s button
(
Ypage 38).
Setting the volume ma nually
XSetth e volume using the thumbwheel during
th e navigation announcement.
iWhen you start the engine, the volume will
be at its lowest setting.
Route guidance91
Navigation
Z
Page 150 of 230
This enables you to continue navigating to a
destination which is in a pedestrian zone, for
example.
RConversely, a destination can be selected on
the external device and transferred to the
vehicle's multimedia system.
Requirements
Observe the following requirements for using
Mercedes-Benz Companion:
RThe iPhone®must be switched on and logged
into a mobile phone network.
RThe iPhone®must have an IOS version higher
than version 8.0.
RMercedes-Benz Companion must be installed
on the iPhone®and activated (see the manu-
facturer's operating instructions).
RThe iPhone®must be connected to the mul-
timedia system (Ypage 113).
RMercedes-Benz Companion must be author-
ized on the multimedia system (Ypage 148).
RTo use door-to-door navigation, location
access must be enabled on the iPhone®.
RThe Apple Watch®must be connected to the
iPhone®(see the manufacturer's operating
instructions).
Authorizing Mercedes-Benz Compan-
ion
If you wish to use Mercedes-Benz Companion
with the multimedia system, you must first
authorize it.
If you wish to use door-to-door navigation, you
must first enable location finding on your
iPhone
®.
On the multimedia system
XSwitch on the multimedia system.
A prompt appears asking for permission for
Mercedes-Benz Companion to connect with
the vehicle.
XGive authorization. On the iPhone
®
XCall up Mercedes-Benz Companion
A prompt appears asking permission for
Mercedes-Benz Companion to access loca-
tion details.
XAllow access.
Door-to-door navigation using Mercedes-
Benz Companion can now be used.
Door-to-door navigation (transferring
a destination from the vehicle to an
external device)
You can transfer the destination from the vehi-
cle to an iPhone®or Apple Watch®.
This way, you can navigate on foot to a destina- tion that cannot be reached by vehicle.
In the vehicle
XSwitch off the engine and remove the Smart-
Key.
The current destination and the vehicle's
location are transferred from the multimedia
system to the iPhone
®or Apple Watch®.
On the iPhone
®
XSelect the destination and select the pedes-
trian symbol.
XStart navigation.
If using the iPhone®to navigate, you will be
guided to your destination via navigation dis-
plays and spoken instructions.
If you use an Apple Watch
®, navigation is
done via the watch.
The Apple Watch
®assists you with route guid-
ance by vibrating, emitting acoustic signals
and giving spoken commands.
Door-to-door navigation (transferring
a destination from an external device
to the vehicle)
You can transfer the destination from an exter-
nal device to the vehicle's multimedia system:
Rvia the Apple Watch®
Rvia the iPhone®
148Mercedes-Benz Companion
Online and Internet functions
Page 201 of 230
Your multimediasystem equipment
These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specifi cdifferences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems andfunc-
tions.
Read the information on qualified specialist
workshop s in the vehicle Operator's Manual.
SIRIUS Weather
Introduction
Thisfunction is currentl yno t available for Can-
ada.
Fo rth e reception of weather forecasts via sat-
ellite radio, you will need a SIRIUS XM Satellite
Weather subscription.
If th e message: Please call SIRIUS to
activate the system at :888-539-7474ESN :SIRIUS IDappears along with theID
number of the SIRIUS device, you will need to
have the weather service activated first.
XTo select CallorCancel:turn an dpress th e
controller.
If a mobile phone is connected to the multi-
media system(
Ypage 113), when you select
Cal la call is placed to a member of the SIR-
IU S service staff. The ID number of th eSIRIU S
device will be transferred to the telephone
display.
XThis will be followed by instructions from the
service employee.
The multimedia system can receive weather
forecast sfo rth eUS A (including Alaska and
Hawaii) via satellite radio. The received weather
data can be displayed as an information chart
(daily forecast , five-day forecast, detailed infor-
mation) or on the weather map.
The weather data received from the weather
station is stored for one hour in the multimedia
system. It can therefore be displayed again
immediately after restarting the engine (for
example after refueling). Depending on which scale has been selected,
th
e weather map can display the following
weather data with symbols:
Rrain radar
Rstorm characteristics
Rhigh and low-pressure areas, weather fronts
Rcourse of tropical cyclones (hurricanes,
typhoons )
Rstorm warnings
Rwind direction and speeds
iThe rain radar cannot be displayed for
Alaska, Hawaii and Puerto Rico.
iHurricane: term used to describe the tropi-
cal cyclones that primarily develop in the
Atl antic, North Pacifi c andSouth Pacific
oceans. The wind speeds are above 74 mph
(118 km/h). Five categorie sare used to clas-
sify thestrengt h of a hurricane.
Typhoon: term used to describe a tropical
cyclone that develops in the northwestern
Pacific. The wind speeds are in the category of
a hurricane.
Switching the SIRIUS Weather display
on/off
Activating
XTo display th e main function bar: slide5
th econtroller.
XTo select ®,turn an dpress th econtroller.
The online applications menu appears.
XTo select SIRIUS Weathe r,turn an dpress
th econtroller.
The information chart shows th e daily fore-
cast at the current vehicle position.
SIRIUS Weather199
SIRIUS Weather