battery MERCEDES-BENZ S450 HYBRID 2010 W221 Owner's Manual

A
ABS (Antilock Brake System) ............. 10
Warning lamp ................................... 24
Anticorrosion/antifreeze .................... 36
Antilock Brake System see ABS
Automatic transmission
Messages in the multifunction
display ............................................. 21
Axle oils ................................................ 35
B
BAS (Brake Assist System) ................. 11
Battery Charging .......................................... 28
Charging condition high-voltage
battery (COMAND) ...........................15
Charging condition high-voltage
battery (instrument cluster) .............15
Jump starting ................................... 29
Messages in the multifunction
display ............................................. 22
Safety notes ..................................... 26
see High-voltage battery
Brake Assist System
see BAS
Brakes
Messages in the multifunction
display ............................................. 23
Warning lamp ................................... 24
Brake system
see RBS
C
Capacities and recommended
fuel/lubricants .................................... 34
Charging condition high-voltage
battery (COMAND) ............................... 15
Climate control system ...................... 19
COMAND
Charging condition high-voltage
battery ............................................. 15
Fuel consumption ............................ 16
Generated electric power ................16
Overview .......................................... 14
Combustion engine
Malfunction ...................................... 25
Starting ............................................ 16
Consumption statistics (COMAND) ... 16
Control system
Overview .......................................... 14
Coolant
Anticorrosion/antifreeze .................36
Capacities ........................................ 35
Cruise control ...................................... 11
D
Displays
Charging condition high-voltage
battery (COMAND) ...........................15
Charging condition high-voltage
battery (instrument cluster) .............15
Messages in the multifunction
display ............................................. 20
Multifunction and COMAND
display ............................................. 15
DISTRONIC PLUS ................................. 11
Driving and parking
Safety notes ..................................... 16
Driving off ............................................ 17
Driving safety systems
ABS .................................................. 10
BAS .................................................. 11
RBS .................................................. 10
Driving systems
Cruise control .................................. 11
DISTRONIC PLUS ............................. 11
Driving tips .......................................... 18
DISTRONIC PLUS ............................. 18
E
ECO Start/Stop function .................... 17
Electric drive
Engine number ................................. 32
Engine
see Combustion engine
Engine number
Electric drive .................................... 32
Enviromental protection ....................... 7
ESC (Electronic Stability Control)
Warning lamp ................................... 24
4Index221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 4

F
Flat tire
Spare wheel ..................................... 34
Fluids
Automatic transmission fluid ...........35
Brake fluid ....................................... 35
Capacities ........................................ 34
Engine coolant ................................. 35
Engine oil ......................................... 35
Power steering fluid .........................35
Washer and headlamp cleaning
system ............................................. 35
Fuel
Capacity, fuel tank ...........................35
Fuels, coolants, lubricants etc. .......... 34
Fuel tank
Capacity ........................................... 35
H
High voltage see Safety notes
High-voltage battery ........................... 10
Charging .......................................... 29
Charging condition (COMAND) ........15
Exhaustive discharge .......................27
Messages in the multifunction
display ............................................. 22
Removing/installing cover ...............27
Hood
Messages in the multifunction
display ............................................. 22
HYBRID system
Automatic switch-off .................. 10, 26
Overview .......................................... 13
READY indicator lamp ......................16
I
Indicator lamp see Lamps, indicator and warning
Instrument cluster .............................. 14
Lamps .............................................. 24
Introduction ......................................... 12
J
Jump starting ....................................... 29
Jump start terminal
Removing/installing cover ...............28
L
Lamp see Lamps, indicator and warning
Lamps, indicator and warning ............ 24
ABS .................................................. 24
Brakes (red) ..................................... 24
ESC .................................................. 24
Instrument cluster ........................... 24
RBS .................................................. 24
SRS .................................................. 26
M
Message see Lamps, indicator and warning
Minispare wheel
see Spare wheel
Multifunction display
Symbol messages ............................ 22
Text messages ................................. 21
Vehicle status messages .................20
Multifunction display messages
Automatic transmission ...................21
Battery ............................................. 22
Brakes ............................................. 23
Display malfunction .........................20
Hood ................................................ 22
O
Operating safety .................................... 7
P
Parking ................................................. 18
R
RBS (Recuperative Brake
System) .......................................... 10, 12
Malfunction ................................ 24, 26
Warning lamp ................................... 24
READY indicator lamp ......................... 16
Index5221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 5

Enviromental protection
Have the high-voltage battery disposed of in
an environment-friendly manner by an
authorized Mercedes-Benz Center.GWarning!
The HYBRID system is energized by high
voltage. The components of the HYBRID
system are indicated by yellow warning
labels. High-voltage cables are orange-
colored.
You could be seriously or even fatally injured
when you
R tamper with components or high-voltage
cables of the HYBRID system
R touch components or high-voltage cables
of the HYBRID system after the vehicle has
been involved in an accident
R touch damaged components of the HYBRID
system
Do not remove the high-voltage battery of the
HYBRID system. Have the high-voltage
battery disposed of in an environment-
friendly manner by an authorized Mercedes-
Benz Center.
i For more information on the high-voltage
battery, see ( Y page 26).
Operating safety
GWarning!
When your vehicle is in electric drive mode the
engine produces significantly lower noise
levels. Other motorists or pedestriants,
especially those who are visually or hearing
impaired, may be unable to hear your vehicle
while it is in motion. This is particularly true
when driving at lower speeds and during
parking maneuvers. At all times, it is the
responsibility of the driver to be aware of their
surroundings, especially in these low speed
situtations. Otherwise other road users could
be seriously or fatally injured.GWarning!
Have all work on the vehicle, especially safety-
related work, work on safety-relevant
systems, work on the HYBRID system as well
as maintenance work, carried out by an
authorized Mercedes-Benz Center.
i For more information on operating safety,
refer to the Operator’s Manual.
Vehicle modifications
GWarning!
Improper work on the HYBRID system or
modifications of the vehicle can cause vehicle
systems to cease functioning properly. You
could lose control over the vehicle and cause
an accident.
Therefore, have work on the HYBRID system
and modifications of the vehicle such as
installation or modification of vehicle
equipment carried out by an authorized
Mercedes-Benz Center
i For more information on operating safety,
refer to the Operator’s Manual.
Trailer hitch
! Retrofitting the vehicle with a trailer hitch
is not permissible. Damage caused by
retrofitting the vehicle with a trailer hitch is
not covered by the Mercedes-Benz Limited
Warranty.
Introduction7221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 7Z

Automatic HYBRID system switch-off
The HYBRID system switches off
automatically if
R the Supplemental Restraint System (SRS)
activates the restraint systems in an
accident
R a short circuit in the HYBRID system is
detected
R a plug connection of the HYBRID system is
disconnected
These measures help to prevent you from
coming into contact with high voltage.
High-voltage battery
GWarning!
The high-voltage battery of the HYBRID
system is located in the engine compartment
on the passenger side of the front wall. When
the pressure inside the high-voltage battery
exceeds a certain value, for example in case
of a vehicle fire, inflammable gas will escape
via a duct. The inflammable gas escapes to an
area close to the passenger-side front wheel.
This prevents the high-voltage battery from
exploding.
Stay away from this area of the vehicle.
Driving safety systems
ABS (Antilock Brake System)
Braking
When the ABS engages during braking, the
ABS/ESC warning lamp ÷ in the
instrument cluster ( Y page 14) flashes. The
brake pedal will pulsate only in certain
situations, for example on a slippery road.
i For more information on the ABS, refer to
the Operator's Manual.
RBS (Recuperative Brake System)
The RBS supports you while braking by
electronic controlled brake boost and allows
for regeneration of braking energy. RBS must
be activated when the vehicle is parked each
time before driving off.XMake sure the automatic transmission is in
park position P.XSwitch on the ignition.XApply the brake pedal fully and release it.
The RBS is activated.
While you activate the RBS, less brake pedal
pressure than usual is required and the brake
pedal travel is longer. When you release the
brake pedal, the brake pedal travel is as usual
again.
For more information on the RBS, see
( Y page 12).
GWarning!
If the RBS malfunctions, the yellow RBS
warning lamp é and/or the red brake
warning lamp $ (USA only) or J
(Canada only) in the instrument cluster comes
on. Read and observe the messages in the
multifunction display that may appear. Find
the subentry “Malfunction” of the entry “RBS
(Recuperative Brake System)” in the index of
this manual and follow the steps described in
that section.
GWarning!
If the RBS malfunctions, less brake pedal
pressure than usual may be required and the
brake pedal travel may be longer. The brake
system still functions with full effectiveness.
If required, you have to depress the brake
pedal further. Adapt your speed and driving
accordingly.
GWarning!
Have work on the RBS, e.g. brake pad
replacement, carried out by qualified
technicians only.
10Safety and security221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 10

Introduction
The HYBRID technology combines an
economical combustion engine with a
powerful electric drive. The HYBRID system
selects the most efficient operating mode for
each driving situation automatically. You can
drive the vehicle in the usual manner.
The HYBRID system turns the combustion
engine off when stopping as often as possible
in order to save fuel. You will just have to
continue to keep the brake pedal depressed
or to activate the HOLD function. Thus, the
engine should normally never run at idle
speed.
When you remove the foot from the brake
pedal or accelerate when the HOLD function
is activated, the combustion engine starts
automatically. You can drive off as usual.GWarning!
When the green READY indicator lamp in the
instrument cluster is on while the combustion
engine is off, the combustion engine has been
turned off automatically. All vehicle systems
continue to be active. When you open the
driver’s door, unbuckle the seat belt, or take
your foot off of the brake pedal, the
combustion engine starts automatically. The
vehicle could start to drive off. An accident
causing serious or even fatal personal injury
to you and/or others could be the result.
Therefore, always do the following before
leaving the vehicle:
R Engage the electronic parking brake.
R Shift the automatic transmission into park
position P.
R Switch off the ignition. The green or yellow
READY indicator lamp goes out.
Driving off and accelerating consumes the
most energy. Thus, the electric drive supports
the combustion engine with the energy stored
in the high-voltage battery. The energy is also
used for semi-electrical driving, for operation
of the electric compressor of the cooling
system and to support the 12-volt on-board
power supply. The hybrid drive thereby
contributes significantly to the fuel economy
of your vehicle.
For information on driving and parking, see
( Y page 16).
The current operating mode of the HYBRID
system can be displayed in the multifunction
display and in the COMAND display
( Y page 14).
The COMAND can also display a chart of the
fuel consumption and the electric power that
has been generated ( Y page 16).
RBS
With the RBS activated ( Y page 10), the
electric drive functions as a generator when
coasting and braking. HYBRID converts the
energy of movement into electric power and
stores it in the high-voltage battery. The high-
voltage battery does not require additional
charging by other means.
12Controls in detail221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 12

Overview HYBRID systemComponent:12-volt battery;Voltage transformer
(transforms the voltage of the 12-volt
battery and the high-voltage battery in
both directions for best possible
power management)
=High-voltage batteryComponent?Electric driveAElectric refrigerant compressor for
the climate control system
BPower electronics
(control the high-voltage system)
CCombustion engineControls in detail13221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 13Z

Instrument clusterFunctionPage:÷ ABS/ESC warning
lamp
10,
24
;$ Brake warning lamp,
USA only24
J Brake warning lamp,
Canada only24
=é Recuperative Brake
System (RBS) warning lamp24
?Green or yellow READY
indicator lamp for the
HYBRID system16
AMultifunction display
with:
Charging level high-voltage
battery15
Control system and COMAND
iFor information on the instrument cluster
control system and COMAND operation,
refer to the Operator’s Manual.
The current operating mode of the HYBRID
system can be displayed in the multifunction
display and in the COMAND.
The COMAND can also display a chart of the
fuel consumption and the electric power that
has been generated (Y page 16).
Selecting submenu in the
multifunction display
Use the buttons on the multifunction steering
wheel.
XPress button = or ; to select the
Trip menu.
XPress button 9 or : to select the
HYBRID menu.
Selecting submenu in the COMAND
display
XSelect Vehicle Q Hybrid Q Energy.14Controls in detail221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 14

Multifunction display and COMAND
display examples
Example illustration: Operating mode display
1Combustion engine2Electric drive3High-voltage battery4Charging condition of high-voltage
battery in percent
5Flow of energy
The HYBRID components that are currently
active are highlighted in the multifunction
display and the COMAND display.
Multifunction
display
COMAND displayOperating modeThe electric drive functions as a
generator when coasting and
braking. HYBRID converts the
energy of movement into electric
power and stores it in the high-
voltage battery.
The arrows that indicate the flow
of energy are green.
Boost effect – the electric drive
supports the combustion engine
when driving off and when
accelerating.
The arrows that indicate the flow
of energy are red.
Normal driving – the combustion
engine powers the vehicle.
The arrows that indicate the flow
of energy are white.
Controls in detail15221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 15Z

ECO Start/Stop function
When the green READY indicator lamp : in
the instrument cluster is on, the combustion
engine turns off automatically when
R you stop the vehicle and keep the brake
pedal depressed
R you activate the HOLD function
All vehicle systems remain active, for
example the climate control system.
When you remove the foot from the brake
pedal or accelerate when the HOLD function
is activated, the combustion engine starts
automatically. You can drive off as usual.GWarning!
When the green READY indicator lamp in the
instrument cluster is on while the combustion
engine is off, the combustion engine has been
turned off automatically. All vehicle systems
continue to be active. When you open the
driver’s door, unbuckle the seat belt, or take
your foot off of the brake pedal, the
combustion engine starts automatically. The
vehicle could start to drive off. An accident
causing serious or even fatal personal injury
to you and/or others could be the result.
Therefore, always do the following before
leaving the vehicle:
R Engage the electronic parking brake.
R Shift the automatic transmission into park
position P.
R Switch off the ignition. The green or yellow
READY indicator lamp goes out.
The conditions for turning off the combustion
engine automatically are fulfilled when
R the combustion engine has reached its
operating temperature
R the driver seat belt is fastened and the
driver’s door is closed
R the vehicle has exceeded a speed of 9 mph
(15 km/h) after driving off. In subsequent
stop-and-go traffic, brief forward
movement of the vehicle is sufficient
R you take your foot off the accelerator pedal
R the hood is closed and properly engaged
R the automatic transmission is in drive
position D or neutral position N
R the high-voltage battery is charged
sufficiently
R the HYBRID system is operating
undisturbed
i For information on driving with the
DISTRONIC Plus, see ( Y page 18).
When the conditions for turning off the engine
automatically are not fulfilled, the yellow
READY indicator lamp : is illuminated. The
combustion engine does not turn off
automatically when
R the self-diagnosis of the engine
management is still running
R the temperature of the coolant or the
catalyst is too low
R the climate control system of the vehicle
requires the engine to run
R the battery is being charged
R the vehicle has moved backward shortly
before
R the automatic transmission is in reverse
gear R
R automatic emission tests are in progress
After the combustion engine has been turned
off automatically, it restarts automatically in
circumstances, when
R the charging condition of the high-voltage
battery has reached the lower limit
R the settings of the climate control systems
require the engine to run, for example at an
outside temperature over 100‡ (38 †)
Driving off
Depress the brake pedal and shift the
automatic transmission into drive position D
or reverse gear R. If the message Apply
Controls in detail17221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 17Z

XEngage the electronic parking brake.
The parking brake indicator lamp $
(USA only) or ! (Canada only) in the
instrument cluster comes on.XShift the automatic transmission into park
position P.XSwitch off the ignition.
The green or yellow READY indicator lamp
goes out.
i For more information on parking and on
turning off the combustion engine, refer to
the Operator’s Manual.
Climate control
Notes
The climate control system is available when
the vehicle is operational and the green or
yellow READY indicator lamp is on.
The set temperature of the vehicle interior is
maintained for a certain period after the
combustion engine was turned off
automatically. Air recirculation switches on
automatically. The indicator lamp in rocker
switch g is not lit when the air
recirculation mode is switched on
automatically.
Air conditioning switched on
automatically
If the operating temperature of the high-
voltage battery is too high, it will be cooled by
the climate control system. The air
conditioning switches on automatically.
In such circumstances it is not possible to
switch off the air conditioning via COMAND
for several minutes.
i For more information on the climate
control system, refer to the Operator’s
Manual.
Controls in detail19221_ZA; 1; 21, en-USd2ureepe,Version: 2.11.8.12009-05-13T13:56:31+02:00 - Seite 19Z