Auto Start MERCEDES-BENZ S550 2007 W221 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2007, Model line: S550, Model: MERCEDES-BENZ S550 2007 W221Pages: 705
Page 7 of 705
ContentsCOMAND navigation system
(last destinations) .............................. 201
Saving a destination permanently
in the destination memory ........... 201
Saving the vehicle position in
the list of last destinations ........... 201
Saving the crosshair position in
the list of last destinations ........... 201
Deleting one of the last
destinations ................................. 201
COMAND address book ..................... 202
General notes ............................... 202
Address book menu overview ...... 202
Calling up the address book ......... 202
Selecting an entry in the main
address book display.................... 202
Creating a new address book
entry ............................................. 203
Deleting an entry .......................... 204
Searching for an address book
entry ............................................. 204
Displaying a complete address
book entry .................................... 206
Displaying of a complete phone
book entry in the mobile phone.... 207
Changing an entry ........................ 207Calling a number saved in
an entry ........................................ 209
Starting route guidance to
an entry ........................................ 209
Voice entries ................................ 210
Saving a phone book entry from
mobile phone in the COMAND
address book ............................... 211
Importing data from external
Bluetooth devices ........................ 212
COMAND system settings................. 213
Systems settings menu overview . 213
Display settings............................ 213
Time settings................................ 213
Voice Control* settings ................ 215
Setting the system language ........ 216
Assigning the favorite button ....... 216
Bluetooth settings ........................ 217
Reset............................................ 219
COMAND vehicle menu ..................... 220
Setting night security illumination 220
Locator lighting on/off ................. 221
Exterior mirror convenience
settings ........................................ 222
Automatic locking on/off ............. 223Activating easy-entry/exit feature 224
Setting interior ambient lighting .. 225
Setting interior lighting delayed
switch-off ..................................... 226
Extending or retracting rear
window sunshade ........................ 227
Trunk opening-height restriction
on/off .......................................... 227
Switching on/of the tow-away
alarm............................................ 228
COMAND automatic climate control . 229
Setting temperature..................... 230
Adjusting air distribution.............. 230
Adjusting air volume .................... 230
Central climate control menu via
COMAND ..................................... 231
Operating rear climate control*
from the front .............................. 234
COMAND seats ................................. 236
Operating seats via COMAND ...... 236
Lumbar support ........................... 237
Multicontour seats*, front ........... 237
Drive-dynamic multicontour
seats, front*................................. 240
Page 9 of 705
ContentsStarter switch positions ..................... 315
SmartKey ..................................... 315
SmartKey with KEYLESS-GO*....... 316
Seats.................................................. 318
Seat adjustment ........................... 318
Seat heating* ............................... 322
Seat ventilation* .......................... 323
Head restraints............................. 324
Multicontour seats*, rear ............. 327
Easy-entry/exit feature ................ 328
Steering wheel ................................... 330
Steering wheel adjustment........... 330
Heated steering wheel* ............... 331
Mirrors ............................................... 332
Interior rear view mirror ............... 332
Exterior rear view mirrors ............. 332
Power folding exterior rear view
mirrors ......................................... 333
Auto-dimming rear view mirrors ... 334
Activating exterior rear view
mirror parking position ................. 335
Memory function................................ 336
Storing positions into memory ..... 337
Recalling positions from memory . 337
Storing exterior rear view mirror
parking position ........................... 338Fastening the seat belts .................... 339
Proper use of seat belts ............... 341
Seat belt height adjustment ......... 341
Lighting.............................................. 342
Exterior lamp switch..................... 342
Combination switch ..................... 346
Corner-illuminating lamps ............ 347
Hazard warning flasher ................ 348
Interior lighting............................. 348
Courtesy lighting .......................... 350
Door entry lamps ......................... 350
Trunk lamp ................................... 350
Windshield wipers.............................. 351
Switching on/off windshield
wipers .......................................... 351
Intermittent wiping....................... 352
Single wipe................................... 352
Wiping with windshield washer
fluid .............................................. 352
Power windows.................................. 353
Opening and closing power
windows ....................................... 353
Rear side window sunshades* ..... 355
Summer opening feature.............. 355
Convenience closing feature ........ 356Driving and parking ........................... 359
Starting the engine ...................... 359
Driving off .................................... 361
Turn signals.................................. 362
Problems while driving ................. 362
Parking......................................... 363
Turning off the engine .................. 365
Releasing seat belts ..................... 366
Automatic transmission..................... 367
Gear selector lever....................... 367
Shifting procedure ....................... 369
Automatic transmission positions 370
Gear ranges ................................. 372
Driving tips................................... 373
Automatic shift program .............. 374
Steering wheel gearshift control .. 375
Emergency operation
(Limp-Home Mode) ...................... 377
Instrument cluster ............................. 378
Adjusting instrument cluster and
COMAND display illumination ...... 378
Coolant temperature gauge ......... 378
Tachometer.................................. 379
Outside temperature indicator ..... 379
Fuel gauge ................................... 379
Page 28 of 705
27 At a glance
Cockpit
Item
Page
1
Combination switch
Turn signals
Windshield wipers
High beam
Cornering lamps
362
351
346
347
2
Lever for
Cruise control
DISTRONIC Plus*
380
385
3
Horn
4
Multifunction steering wheel
242
5
Instrument cluster
28
6
Steering wheel gearshift con-
trol
375
7
Gear selector lever for
automatic transmission
359
Item
Page
8
Control panel with
Front passenger front
air bag indicator lamp
Vehicle level control
switch
Electronic Stability Pro-
gram (ESP
®) switch
Parktronic*/Park Assist*
deactivation switch
Swivel COMAND display
COMAND/instrument
cluster illumination
53
401,
403
73
408,
408
81
378
9
COMAND display
79
a
Overhead control panel
37
b
Automatic climate control
Center console, upper part
424
32
Item
Page
c
Glove box lock
448
d
Cover of compartment with
CD changer
PCMCIA card slot
107
108
e
Center console, lower part
33
f
Starter switch
KEYLESS-GO* start/stop but-
ton
315
316
g
Steering wheel adjustment
Heated steering wheel*
330
331
h
Headlamp washer button
346
j
Parking brake
364
k
Hood lock release
492
l
Door control panel
39
m
Night View Assist*
420
n
Exterior lamp switch
342
Page 74 of 705
73 Safety and Security
Driving safety systems
For more information, see “Practical hints”
section (
page 549) and (
page 582).
ETS
The Electronic Traction System is a compo-
nent of ESP
®.
The Electronic Traction System (ETS) im-
proves the vehicle’s ability to utilize avail-
able traction, especially under slippery road conditions. The brakes are applied to
the spinning wheel and power is trans-
ferred to the wheel(s) with traction.
The ESP
® warning lampvin the instru-
ment cluster starts to flash at any vehicle
speed, as soon as a tire loses traction and
the wheel begins to spin.
When you switch off the ESP
®, the ETS is
still enabled.Switching off the ESP
®
To improve the vehicle’s traction, turn off
the ESP
® in driving situations where it
would be advantageous to have the drive
wheels spin and thus cut into surfaces for
better grip such as:
when driving with snow chains
in deep snow
in sand or gravel
i
The ESP
® will only function properly if you
use wheels of the recommended tire size
(
page 655).
!
Because of the ESP’s
® automatic operation,
the engine and ignition must be shut off
(SmartKey in starter switch position0 or1 or
KEYLESS-GO start/stop button* in position0
or1) when
the parking brake is being tested on a brake
test dynamometer
the vehicle is being towed with the
front/rear axle raised
Active braking action through the ESP
® may oth-
erwise seriously damage the brake system.
Warning!
G
If you are driving too fast, the Electronic
Traction System cannot reduce the risk of
an accident.
The ETS cannot prevent the natural laws of
physics from acting on the vehicle.i
If the yellow ESP
® warning lampv
comes on while driving, the ETS is being
switched off temporarily to prevent overheating
of the drive wheel brakes. In addition, the mes-
sage “ESP Currently unavailable See Oper. Man-
ual” appears in the multifunction display.
Warning!
G
The ESP
® should not be switched off during
normal driving other than in the circum-
stances described below. Disabling of the
system will reduce vehicle stability in stan-
dard driving maneuvers.
!
Turn the ESP
® on immediately if the afore-
mentioned circumstances do not apply anymore.
i
DISTRONIC Plus* cannot be activated when
the ESP
® has been switched off.
Page 76 of 705
75 Safety and Security
Anti-theft systems
Anti-theft systems
Immobilizer
The immobilizer prevents unauthorized
persons from starting your vehicle.
Activating
With the SmartKey: Remove the
SmartKey from the starter switch.
With the KEYLESS-GO*: Turn off the
engine (
page 317) and open the driv-
er’s door.
Deactivating
Switch on the ignition (
page 315).
Anti-theft alarm system
Once the alarm system has been armed, a
visual and audible alarm is triggered when
someone opens:
a door
the trunk
the hood
The alarm will stay on even if the activating
element (a door, for example) is immedi-
ately closed.
The alarm system will also be triggered
when
the vehicle is raised
the vehicle is opened with the
mechanical key
a door is opened from the inside
To cancel the alarm after it has been trig-
gered, see “Canceling the alarm”
(
page 76).1Indicator lamp
Arming: Lock your vehicle with the
SmartKey or KEYLESS-GO*.
The turn signal lamps flash three times
to indicate that the alarm system is ac-
tivated. The indicator lamp1 flashes
to indicate that the alarm system is
armed.
i
Starting the engine will also deactivate the
immobilizer.
In case the engine cannot be started (yet the ve-
hicle’s battery is charged), the system is not op-
erational. Contact an authorized Mercedes-Benz
Center or call 1-800-FOR-MERCedes (in the
USA), or 1-800-387-0100 (in Canada).
i
If the alarm stays on for more than
30 seconds, a call to the Response Center is ini-
tiated automatically by the Tele Aid system
(
page 462) provided Tele Aid service was sub-
scribed to and properly activated, and that nec-
essary mobile phone, power supply and GPS
coverage are available.
Page 77 of 705
76 Safety and SecurityAnti-theft systems
Disarming: Unlock your vehicle with
the SmartKey or KEYLESS-GO*.
The turn signal lamps flash once to in-
dicate that the alarm system is dis-
armed.
Tow-away alarm
Once the tow-away alarm is armed, a visual
and audible alarm will be triggered when
someone attempts to raise the vehicle.
To cancel the alarm after it has been trig-
gered, see “Canceling the alarm”
(page 76).
Arming: Lock your vehicle with the
SmartKey or KEYLESS-GO*.
The tow-away alarm is automatically
armed after about 30 seconds.
Disarming: Unlock your vehicle with
the SmartKey or KEYLESS-GO*.
To prevent triggering the tow-away alarm
feature, switch off the tow-away alarm be-
fore towing the vehicle, or when parking on
a surface subject to movement, such as a
ferry or auto train. To switch off the tow-away alarm, see
“Switching on/of the tow-away alarm”
(
page 228).
Canceling the alarm
To cancel the alarm, do one of the follow-
ing:
Insert the SmartKey in the starter
switch.
Press the Œ or ‹ button on the
SmartKey.
In vehicles with KEYLESS-GO*:
Grasp an outside door handle.
The SmartKey with KEYLESS-GO must
be within 3 ft. (1 m) of the vehicle.
Press the KEYLESS-GO start/stop but-
ton (
page 317).
The SmartKey with KEYLESS-GO must
be inside the vehicle.
i
If the turn signal lamps does not flash three
times one of the following elements may not be
properly closed:
a door
the trunk
Close the respective element and lock the vehi-
cle again.
i
The alarm system will rearm automatically
again after approximately 40 seconds if no door
was opened.
i
If the alarm stays on for more than
30 seconds, a call to the Response Center is ini-
tiated automatically by the Tele Aid system
(
page 462) provided Tele Aid service was sub-
scribed to and properly activated and that neces-
sary mobile phone, power supply and GPS
coverage are available.
i
When you unlock your vehicle, the tow-away
protection disarms automatically.
The tow-away alarm remains disarmed until you
lock your vehicle again.
Page 90 of 705
89 Control systems
COMAND introduction
Main menus of COMAND
Sound
Muting: Press the F shortcut but-
ton in the center console (
page 80).
The sound of the current audio source
is switched on or is muted.Switching off navigation announce-
ments entirely
Canceling navigation message:
Briefly press F shortcut button dur-
ing an announcement.
Switching off navigation messages:
Press and hold F during an an-
nouncement until the announcement is
switched off.
You will see the message “The driving
instructions have been muted.” for a
short while.Adjusting volume
1Thumbwheel
Adjusting: Turn, thumbwheel.
The volume of the currently selected
audio source changes.
i
The components and operating principles of
COMAND can be found on (
page 79).
i
When the sound is muted, you will see the
symbol
F
in the status line. When you
change the audio source, the sound is automati-
cally switched on. You will be able to hear an-
nouncements from the navigation system even
when the sound is muted.
i
The announcements remain switched off
even if you start a new route guidance or if
COMAND is switched off/on with theo but-
ton.
If you switch COMAND off by removing the
SmartKey from the starter switch and then
switch the ignition back on after more than
3 minutes, the announcements are automatical-
ly switched back on.
Page 126 of 705
125 Control systems
COMAND telephone*
If you have accepted the call using the
Bluetooth headset, the call will be conduct-
ed via the headset.
Further operating functions can be found
in the “Functions during a single-call con-
nection” section (
page 127).
You can also accept a call if the
COMAND display is showing a screen oth-
er than the telephone mode screen. After
accepting the call, you will see the caller’s
data in a window.
Closing window: Slide qmr oromp
or press n.
Making an outgoing callEntering the telephone number using
the COMAND controller
Switching screen to telephone
mode: Call up main telephone menu
(page 121).
Entering digits: Select desired digits
by rotating ymz or sliding omp and
press n.
Deleting individual digits: Select )
and briefly press n.
Deleting an entire telephone num-
ber: Select ) and press and hold n
until the telephone number is deleted.
Connecting a call: Select “S”.
Entering a telephone number using the
telephone keypad
Switching screen to telephone
mode: Call up main telephone menu
(page 121).
Use telephone keypad to enter digits.
Connecting a call: Press s.
Redial
Switching screen to telephone
mode: Call up main telephone menu
(page 121).
Use COMAND controller to select
“S”.
or
Press s on the telephone keypad
(page 82).
The list of dialed numbers appears. The
most recently dialed number is at the
top.
Select desired entry.
Connecting a call: Press n.
i
If you place an outgoing call and receive a
busy signal, the telephone automatically starts
to redial as long as the provider and the mobile
phone support this function (see mobile phone
operating instructions).
While the call is connecting, you can also send
character strings (
page 127).
i
A detailed description of how to enter digits
using the telephone keypad can be found on
(
page 82).
i
If the list of dialed calls contains no entries,
the “S” menu item cannot be selected and the
s button on the telephone keypad does not
function.
Page 133 of 705
132 Control systemsCOMAND telephone*
Changing smart speller character
set: Select #.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
Entering characters: Select the char-
acters of the entry you are searching
for one by one.
Deleting individual characters: Se-
lect ) and briefly press n.
Each time you enter or delete a charac-
ter, the closest match will be displayed
at the top of the list.
Deleting an entire entry: Select )
and press and hold n until the entry is
deleted.
Canceling search: Switch from the
smart speller to the list.
The entry at the top of the list is auto-
matically highlighted.Selecting using the list
If necessary, switch from the smart
speller to the list.
Rotate ymz or slide qmr until the de-
sired entry is highlighted.
Selecting subentries
Select an entry with the + symbol and
press n.
The + symbol changes to / and the
subentries are displayed.
Rotate ymz or slide qmr until the de-
sired subentry is highlighted.
Displaying details of an entry
COMAND can also show a shortened entry
in its entirety. For entries featuring suben-
tries, the detailed view is only available for
the subentries and not for the main entry.
Select entry (
page 131).
Select “Options” “Details”.
The detailed view appears.
Closing detailed view: Slide qmr or
omp or press n or back button L
in the center console (
page 80).
Starting to dial the number of an entry
Select entry (
page 131).
Press n.
or
Press s on the telephone keypad.
A list appears if the entry contains sub-
entries.
Select desired subentry.
Press n again.
or
Press s on the telephone key-
pad.
Page 142 of 705
141 Control systems
COMAND navigation (introduction)
Updating the map software
You can update the map software yourself
using a DVD.
Notes about handling DVDs
Only hold discs by the edge.
Handle discs carefully to prevent read
problems.
Avoid getting scratches, fingerprints
and dust on discs.
Use a commercially-available cleaning
cloth to clean discs. Do not wipe them
with a circular motion, but only in
straight lines from the center out-
wards.
Place discs back in their boxes after
use.
Protect discs from heat and direct sun-
light.
Updating process
The updating process has the following
phases:
Loading a DVD into the DVD changer
(page 142)
Updating process (
page 142)
i
The updating process can take between 10
and 60 minutes, depending on the size of the
map software. If the radio was switched on be-
fore you started the updating process, you can
still adjust the volume. You can also use
COMAND to operate the automatic air condition-
ing and to cancel the process. Other functions
are not operational.
If possible, carry out the update when the vehicle
is stationary.
i
If you carry out the update with the engine
switched off and the vehicle battery has insuffi-
cient power, COMAND may automatically switch
off during the process in order to protect the bat-
tery. If this occurs, restart the update with the
engine running period. Similarly, if the SmartKey
position is unintentionally switched to 0, restart
the update.Warning!
G
Never leave the engine running in an en-
closed space. The exhaust gases contain
carbon monoxide. Inhaling exhaust gases
constitutes a health hazard and could lead
to loss of consciousness or even death.