garage door opener MERCEDES-BENZ S550 2007 W221 Owner's Manual

Contents
Driving systems ................................. 380
Cruise control .............................. 380
DISTRONIC Plus* ......................... 385
Airmatic (S 550 only) ................... 401
Active Body Control (ABC)*.......... 403
Parktronic system* ...................... 405
Park Assist* ................................. 409
Dynamic Rear View Monitor* ....... 413
Night View Assist* ....................... 420
Automatic climate control ................. 424
Deactivating climate control
system ......................................... 428
Operating climate control system
in automatic mode ....................... 428
Setting temperature ..................... 429
Adjusting air volume .................... 429
Front defroster ............................. 429
Rear window defroster ................. 430
Maximum cooling MAXCOOL
(USA only) .................................... 430
Air recirculation mode .................. 431
Residual engine heat and
ventilation .................................... 433Front passenger compartment
adjustable air vents....................... 433
Rear passenger compartment
adjustable air vents....................... 434
Rear passenger compartment
climate control* ............................ 434
Trunk .................................................. 436
Opening trunk ............................... 436
Closing trunk ................................ 437
Trunk emergency release.............. 440
Power tilt/sliding sunroof................... 441
Opening and closing power
tilt/sliding sunroof ........................ 441
Synchronizing ............................... 442
Panorama roof with power
tilt/sliding panel* ............................... 443
Roller sunblinds ............................ 443
Opening and closing panorama
roof with power tilt/sliding panel.. 444
Synchronizing ............................... 446Loading and storing............................ 447
Roof rack* .................................... 447
Loading instructions ..................... 447
Storage compartments ................. 448
Cup holders .................................. 452
Trunk ............................................ 453
Useful features ................................... 455
Sun visors ..................................... 455
Vanity mirror in rear...................... 455
Rear window sunshade ................. 456
Ashtrays........................................ 456
Cigarette lighters .......................... 457
Power outlet ................................. 458
Telephone* ................................... 459
Tele Aid......................................... 462
Garage door opener ...................... 470
Infrared reflecting windshield ....... 475

37 At a glance
Overhead control panel
Overhead control panel
Item
Page
1
Eyeglasses compartment
449
2
Left reading lamp on/off
348
3
Rear interior lighting on/off
348
4
Front interior lighting on/off
348
5
Power tilt/sliding sunroof or
tilt/sliding panel*
441
441
6
Tele Aid (emergency call sys-
tem) button
462
7
Interior lighting control
348
Item
Page
8
Opening/closing rear roller
sunblinds
443
9
Right reading lamp on/off
348
a
Rear view mirror
332
b
Garage door opener
470
c
Hands-free microphone for

Tele Aid (emergency call
system)


Telephone*


Voice Control*
462
459
255

470 Controls in detailUseful featuresGarage door opener
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as
garage door openers, gate openers, or oth-
er devices compatible with HomeLink
® or
some other systems.
Before the integrated remote control can
be used, it must be programmed to the ga-
rage door opener, gate operator or other
device you wish to operate. See the follow-
ing instructions for programming informa-
tion.
Interior rear view mirror with integrated re-
mote control1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control but-
ton
Warning!
G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
– signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.
When programming a garage door opener,
park the vehicle outside the garage.

472 Controls in detailUseful featuresStep 7:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the “training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
operator’s manual.
Step 9:

Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing two steps.
Step 10:

Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:

Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.Step 12:

Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:

To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
i
If the indicator lamp1 flashes rapidly for
about 2 seconds and then turns to a constant
light, continue with programming steps 8
through 12 as your garage door opener may be
equipped with the “rolling code” feature.
i
Some garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.

474 Controls in detailUseful featuresProgramming tips
If you are having difficulty programming
the integrated remote control, here are
some helpful tips:

Check the frequency of the hand-held
remote control5 (typically located on
the reverse side of the remote). The in-
tegrated remote control is compatible
with radio-frequency devices operating
between 288-399 MHz.


Put a new battery in the hand-held re-
mote control5. This will increase the
likelihood of the hand-held remote con-
trol sending a faster and more accurate
signal to the integrated remote control.


While performing step 3, hold the
hand-held remote control5 at differ-
ent lengths and angles from the signal
transmitter button (2, 3 or4) you
are programming. Attempt varying an-gles at the distance of 2 to 5 inches
(5 to 12 cm) away or the same angle at
varying distances.


If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.


Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
i
If you sell your vehicle, erase the codes of all
three channels.
i
Certain types of garage door openers are in-
compatible with the integrated remote control. If
you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance Cen-
ter (in the USA only) at 1-800-FOR-MERCedes, or
Customer Service (in Canada) at
1-800-387-0100.
i
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
i
Canada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

687 Index
G
Garage door opener 470
Gasoline see Fuel
GAWR 526
Gear range 673
Automatic transmission 372
Limiting 372
Shifting into optimal 376
Gear selector lever 367
Gearshift pattern 367
Messages in display 562, 566, 567,
569, 610
Position 369
Shifting procedure 369
Transmission position 370
Global Positioning System see GPS
Glove box 448
Gloves, Vehicle tool kit 611
GPS 673
Reception (COMAND) 145
Tele Aid 462
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 526
GVWR 527H
Hands-free microphone 37
Hard plastic trim items, Cleaning 542
Hazard warning flasher 348
Head restraints 324
Adjustment 324
Folding back and placing upright rear
head restraints 325
Front seat 324
Luxury active head restraints
(S600 only) 59
Rear seat 325
Resetting activated luxury active head
restraints (S600 only) 618
Headlamp cleaning system 346, 498
Washer fluid 662, 668
Headlamps
Automatic control 343
Automatic headlamp mode 255
Cleaning lenses 537
Cleaning system 498
Manual headlamp mode 255
Messages in display 595
Refilling washer fluid 499
Headliner and shelf below rear window,
Cleaning and care of 542Heated seats* 322
Heated steering wheel* 331
Height adjustments
Vehicle level (ABC*) 403
High beam
Replacing bulbs 622
High beam flasher 347
High beam headlamps
Switching on 346
High mounted brake lamp 622
Hood 492
Message in display 591
Opening 492
Horn 27
Hydroplaning 483
I
Identification labels 652
Identification Number, Vehicle (VIN) 652
Ignition 315, 317
Switching on 315
Switching on, KEYLESS-GO* 317
Immobilizer 75
Indicator lamps see Lamps, indicator and
warning
Individualization
Voice Control* 302