radio controls MERCEDES-BENZ S55AMG 2003 W220 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2003, Model line: S55AMG, Model: MERCEDES-BENZ S55AMG 2003 W220Pages: 416, PDF Size: 6.81 MB
Page 131 of 416
131 Controls in detail
Control system
Multifunction steering wheel
The displays in the multifunction display
and the settings in the control system are
controlled using the buttons on the multi-
function steering wheel (
page 24).Pressing any of the buttons on the multi-
function steering wheel will alter what is
shown in the multifunction display.
The information available in the multifunc-
tion display is arranged in menus, each
containing a number of functions or sub-
menus.
The individual functions are then found
within the relevant menu (radio or CD op-
erations under
AUDIO
, for example). These
functions serve to call up relevant informa-
tion or to customize the settings for your
vehicle.
1
Multifunction display in the speed-
ometerOperating the control system
2
Selecting the submenu or setting
the volumeç
down / to decrease
æ
up / to increase
3
Telephone*í
to take a call
ì
to end a call
4
Menu systemsè
for next menu
ÿ
for previous menu
5
Moving within a menuj
for next display
k
for previous display
Page 134 of 416
134 Controls in detailControl systemMenus, submenus and functions
Menu 1
Menu 2
Menu 3
Menu 4
Menu 5
Menu 6
Menu 7
Menu 8
Commands/submenusStandard dis-
play
AUDIO
Telephone*
NAVI
Distronic*
Trip computer
Malfunction
memory
Settings
Call up FSS
Select radio
station
Load phone
book
Activate
route guid-
ance
Call up set-
tings
Fuel consumption
statistics after
start
Call up malfunc-
tion messages
Reset to factory
settings
Check tire pres-
sure*
Operate CD
player
Search for
name in
phone book
Fuel consumption
statistics since
the last reset
Instrument clus-
ter submenu
Check engine oil
level
Call up range
Lighting sub-
menu
Digital speed-
ometer
Vehicle sub-
menuConvenience
submenu
Page 135 of 416
135 Controls in detail
Control system
Standard display menu
You can select the functions in the stan-
dard display menu with button
k
or
j
.
The following functions are available:
Display digital speedometer
Press the
j
or
k
button repeat-
edly until you see the digital speedom-
eter appear in the display.
The current vehicle speed is shown in
the multifunction display.
AUDIO menu
The functions in the
AUDIO
menu operate
the audio equipment which you currently
have turned on.
If no audio equipment is currently turned
on, the message
AUDIO OFF
i s s h ow n i n t h e
display.
The following functions are available:
iThe headings used in the menus table
are designed to facilitate navigation
within the system and are not neces-
sarily identical to those shown in the
control system displays.
The first function displayed in each
menu will automatically show you
which part of the system you are in.
Function
Page
Call up FSS
281
Check tire pressure*
274
Check engine oil level
264
Call up digital speedometer
see below
Function
Page
Select radio station
136
Operate CD player
136
Page 136 of 416
136 Controls in detailControl systemSelect radio station
Turn on the radio. Refer to separate
COMAND operating instructions.
Press button
è
or
ÿ
repeatedly
until you see the currently tuned sta-
tion in the display.
1Waveband
2Setting for station selection using
memory
3Station frequency
Press button
k
or
j
repeatedly
until the desired station is found.
The type of search depends on the
setting for the station tuning
(
page 154):
Frequency
MemoryOperate the CD player
Turn on the radio and select the CD
player. Refer to separate COMAND op-
erating instructions.
Press button
è
or
ÿ
repeatedly
until the settings for the CD currently
being played appear in the display.
1Current CD
(for CD changer* (
page 137))
2Current track
Press button
k
or
j
repeatedly
until the desired track is selected.
iYou can only store new stations using
the designated feature on the radio.
Refer to separate COMAND operating
instructions.
You can also operate the radio in the
usual manner.
iCD changer*: To select a CD from the
magazine, press a number on the
COMAND system key pad located in
the center dashboard.
Page 139 of 416
139 Controls in detail
Control system
TEL menu*You can use the functions in the
TEL
menu
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
Switch on the telephone and Audio or
COMAND.
Press button
ÿ
or
è
on the
steering wheel repeatedly until you see
the
TEL
menu in the display.
Warning!
G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we rec-
o m m e n d t h a t y o u p u l l o v e r t o a s a f e l o c a t i o n
and stop before placing or taking a tele-
phone call. If you choose to use the tele-
phone while driving, please use the
hands-free device and only use the tele-
phone when weather, road and traffic condi-
tions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of approximately
44 feet (approximately 13.5 m) every sec-
ond.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.
Page 154 of 416
154 Controls in detailControl system
Press
æ
or
ç
to select the de-
sired lamp-on time period. You can se-
lect:
0 S
, the delayed shut-off feature is
deactivated.
5 S,
10 S
, 15 S
, or
20 S
, the delayed
shut-off feature is activated.Vehicle submenu
Access the
VEHICLE
submenu via the
SET-
INGS
menu. Use the
VEHICLE
submenu to
make general vehicle settings. The follow-
ing functions are available:
Setting station selection mode
Use the
STATION SEARCH USING
function to
select the manual or memory station se-
lection mode for the radio (
page 136).
Move the selection marker with
the
æ
or
ç
button to the
VEHI-
CLE
submenu.
Press button
j
or
k
repeatedly
until you see this message in the dis-
play:
STATION SEARCH USING
.
The selection marker is on the current
setting.
Press
æ
or
ç
to select the de-
sired station selection mode. You can
select:
FREQUENCY
MEMORY
selects next stored station
Function
Page
Set station selection mode
(radio)
see
below
Setting automatic locking
155
Page 236 of 416
236 Controls in detailUseful featuresTelephone*
Radio transmitters, such as a portable tele-
phone or a citizens band unit, should only
be used inside the vehicle if they are con-
nected to an antenna that is installed on
the outside of the vehicle.
The external antenna must be approved by
Mercedes-Benz. Please contact an autho-
rized Mercedes-Benz Center for informa-
tion on the installation of an approved
external antenna. Refer to the radio trans-
mitter operation instructions regarding use
of an external antenna.You can take and place telephone calls us-
ing the
í
and
ì
buttons on the
steering wheel. To carry out other tele-
phone functions, use the control system
(
page 130).
See separate operating manual for instruc-
tions on how to use the telephone.
Warning!
G
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or serious
personal injury.
Warning!
G
Please do not forget that your primary re-
sponsibility is to drive the vehicle. A driver’s
attention to the road must always be
his /her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call.
If you choose to use the telephone
1 while
driving, please use the hands-free device
and only use the telephone when road,
weather and traffic conditions permit. Some
jurisdictions prohibit the driver from using a
cellular telephone while driving a vehicle.
Only operate the COMAND (Cockpit Man-
agement and Data System)
1 if road, weather
and traffic conditions permit.
1Observe all legal requirements.
Bear in mind that at a speed of just 30 mph
(approximately 50 km / h), your vehicle is
covering a distance of approximately
44 feet (approximately 13.5 m) every sec-
ond.
Page 243 of 416
243 Controls in detail
Useful features
Upgrade Signals
The Tele Aid system processes calls using
the following priority:
Automatic emergency – First priority
Manual emergency – Second priority
Roadside Assistance – Third priority
Information – Fourth priority
Should a higher priority call be initiated
while you are connected, an upgrade (al-
ternating) tone will be heard, and the ap-
propriate indicator lamp will flash. If
certain information such as vehicle identi-
fication number or customer information is
not available, the operator may need to re-
transmit.
During this time you will hear a beep and
voice contact will be interrupted. Voice
contact will resume once the retransmis-
sion is completed. Once a call is conclud-
ed, a beep will be heard and the
appropriate indicator lamp will stop flash-
ing. The COMAND system operation will
resume.
!If the indicator lamp continues to flash
or the system does not reset, contact
the Response Center at
1-800-756-9018 (in the USA) or
1-888-923-8367 (in Canada), or
Mercedes-Benz Customer Assistance
at 1-800-FOR-MERCedes
(1-800-367-6372) in the USA or Cus-
tomer Service at 1-800-387-0100 in
Canada.iThe indicator lamp in the respective
button flashes until the call is conclud-
ed. Calls can only be terminated by a
Response Center or Customer Assis-
tance Center representative except
Roadside Assistance and Information
calls, which can also be terminated by
pressing button
ì
on the multifunc-
tion steering wheel.
iWhen a Tele Aid call has been initiated,
the audio system or the COMAND sys-
tem audio is muted and the selected
mode (radio, tape or CD) pauses. The
optional cellular phone (if installed)
switches off. If you must use this
phone, the vehicle must be parked. Dis-
connect the coiled cord and place the
call. The COMAND navigation system
(if engaged) will continue to run. The
display in the instrument cluster is
available for use and spoken com-
mands are only available by pressing
the RPT button on the COMAND unit. A
pop-up window will appear in the CO-
MAND display to indicate that a
Tele Aid call is in progress.
Page 402 of 416
402 Index
Selecting stations 136
Station search 136
Station selection setting 154
Radio transmitters, control and operation
258
Range (distance to empty)
Calling up 145
Rear fog lamp 332
Bulb 332
Switching on 123
Rear lamp bulbs
Replacing 336
Rear lamps see Tail lamps
Rear passenger compartment
Adjustable air vents 186
Rear seat head restraints
Folding back with switch 106
Placing upright 106
Rear seats 106
Rear seats 113
Fore and aft adjustment 114
Head restraint folding 114
Individual seats* 114
Passenger seat fore and aft adjustment
116
Passenger seat head restraint height 116
Passenger seat height 116
Rear seat head restraints 106
Seat height 114
Setting passenger seat position from
rear* 115
Rear view mirror 27
Rear view mirror automatic antiglare 168
Rear view mirrors see Mirrors
Rear window
Blocking operation 74
Rear window defroster 183
Activating 183
Deactivating 183
Rear window sunshade* 173
Reconnecting
Vehicle battery 345
Regular checks 262
Regular driving style 214
Reinstalling vehicle battery 345
Remote controls
Integrated 246
SmartKey 86
Remote door unlock
With Tele Aid* 244
Remote Vehicle Diagnostics 384Removing
Vehicle battery 345
Wheel 341
Wiper blades 337
Replacing
Backup lamp bulbs 336
Brake fluid 373
Brake lamp bulbs 336
Bulbs 331
Front lamp bulbs 333
License plate lamp bulbs 336
Parking lamp bulbs 335
Rear fog lamp bulbs 336
Rear lamp bulbs 332, 336
Rear turn signal bulbs 336
Side marker lamp bulbs 335
Standing lamp bulbs 335
Wiper blades 337
Reporting
Safety defects 18
Reset knob in the instrument cluster 146
Resetting
All functions (control system) 146
All functions of a submenu 147
Fuel consumption 144
Service indicator (FSS) 281
Page 405 of 416
405 Index
Simultaneous wiping and washing
Windshield wipers 48
Single wipe 47
Sliding/pop-up roof 192
Closing 192, 330
Closing with KEYLESS-GO* 93, 190,
194
Closing with SmartKey 194
Opening 192, 330
Opening with SmartKey 194
Stopping 193
Synchronizing 195
SmartKey 30
Battery check lamp 87
Changing batteries 328
Changing the batteries 328, 329
Checking the batteries 88
Factory setting 87
Global locking 87
Global locking and unlocking 87
Global unlocking 87
Locking and unlocking 86
Loss of 89
Opening and closing the slid-
ing/pop-up roof with 194
Opening and closing windows with 190Remote controls 86
Restoring to factory setting 88
Selective setting 87
Starting the engine 43
Turning off the engine 52
Unlocking with 30
SmartKey positions in starter switch 31
Snow chains 279
Spare fuses 323
Spare parts service 358
Speed
Setting current 197
Setting to last stored speed in Distron-
ic* ("Resume" function) 205
Speed settings
Cruise control 198
Distronic* 204, 205
Speedometer
Displaying gear range 162
Displays 201
Settings units 149
Speedometer display mode
Selecting 149
Sporty driving style 214
SRS 64, 385
Indicator lamp 292SRS indicator lamp 56
Standing lamps 120
Replacing bulbs 331, 332, 335
Standing water
Driving instructions 257
Starter switch 31
Positions 31
Starting difficulties 44
Starting position 31
Starting the engine 42
Station (radio)
Search 136
Station selection
Setting 154
Steering column
Height adjustment 38
Length adjustment 38
Steering wheel
Adjusting 37
Adjustment 38
Cleaning 287
Heated steering wheel* 235
Height adjustment 38
Steering wheel adjustment 38