language MERCEDES-BENZ S65AMG 2008 W221 Owner's Manual

Contents
Control systems................................ 83
COMAND operating safety ................... 84
COMAND introduction ......................... 85
Availability of functions while the
vehicle is in motion ........................ 85
Switching COMAND on or off ......... 85
COMAND components ................... 85
Operating COMAND ....................... 90
Main menus of COMAND ............... 96
COMAND FM/AM radio ..................... 100
Submenu overview ....................... 100
Switching to radio mode .............. 101
Switching wavebands ................... 101
Selecting stations/channels ........ 101
Saving stations ............................. 103
Station name display .................... 104
COMAND satellite radio* (USA only) . 105
Submenu overview ....................... 105
Introduction to Satellite radio....... 106
Switching to satellite radio ........... 106
Main satellite radio menu ............. 107
Selecting program category ......... 108
Tuning in channels ....................... 108
Saving channels ........................... 110
Show program info ....................... 111Channel update ............................ 111
Calling SIRIUS Service Center ...... 111
COMAND audio CD/audio DVD/MP3 112
Safety precautions ....................... 112
Notes about MP3 mode ............... 112
Notes about audio DVD operation 114
Notes about CDs/DVDs ............... 114
Notes about handling CDs/DVDs 115
Inserting CDs and DVDs............... 115
Inserting a PCMCIA card .............. 117
Ejecting CDs and DVDs ................ 117
Ejecting a PCMCIA card ............... 118
Submenu overview ....................... 119
Switching to audio CD, audio DVD
or MP3 mode ............................... 120
Stop function ............................... 121
Pause function ............................. 121
Selecting CD/DVD/MP3 media ... 121
Selecting a track .......................... 122
Fast forward/rewind .................... 122
Selecting a folder ......................... 122
Setting the audio format .............. 123
Playback options .......................... 123
COMAND video DVD (USA only) ........ 124
Automatic picture fade-out .......... 124
Notes about video DVD operation 124Notes about handling DVDs ......... 125
Functional limitations................... 125
Inserting or ejecting DVDs ........... 125
Submenu overview of
video DVD .................................... 126
Switching to video DVD mode...... 126
Hiding/showing the
DVD control menu ....................... 127
Hiding/showing the menu system 127
Fast forward/rewind .................... 127
Selecting the DVD medium .......... 127
Stop playback .............................. 128
Pause playback ............................ 128
Selecting scene/chapter ............. 128
Selecting film/track..................... 128
Screen settings ............................ 128
DVD menu.................................... 129
Stopping the film or skipping to
the beginning/end of a scene...... 130
Switching to the next highest DVD
menu level ................................... 130
Back to the film............................ 130
Setting the language and
audio format ................................ 131
Subtitles and camera angles ........ 131
Interactive content....................... 131

Contents
Partially digitized areas ................ 210
Off-road and off-map .................... 211
Navigation announcements .......... 213
COMAND navigation system
(during route guidance)...................... 214
Cancel route guidance ................. 214
Continuing cancelled
route guidance ............................. 214
Route browser .............................. 214
Displaying route information ........ 215
Detour function ............................ 216
COMAND navigation system
(destination memory) ......................... 217
Saving a destination in the
destination memory ..................... 217
Deleting a destination from the
destination memory ..................... 218
Own address ................................ 219
COMAND navigation system
(last destinations) .............................. 223
Saving a destination permanently
in the destination memory ........... 223
Saving the vehicle position in the
list of last destinations ................. 223
Saving the crosshair position in
the list of last destinations ........... 223Deleting one of the
last destinations........................... 223
COMAND address book ..................... 224
General notes............................... 224
Address book menu overview ...... 224
Calling up the address book......... 224
Selecting an entry in the main
address book display ................... 225
Creating a new
address book entry ...................... 225
Deleting an entry.......................... 226
Searching for an
address book entry ...................... 226
Displaying a complete
address book entry ...................... 228
Displaying of a complete phone
book entry in the mobile phone ... 229
Changing an entry ........................ 229
Calling a number saved in
an entry ........................................ 231
Starting route guidance to
an entry ........................................ 231
Voice entries ................................ 232
Saving a phone book entry from
mobile phone in the COMAND
address book ............................... 233Importing data from external
Bluetooth® devices ...................... 234
COMAND system settings ................. 235
System settings menu overview... 235
Display settings ........................... 235
Time settings ............................... 235
Voice Control* settings................ 237
Setting the system language........ 238
Assigning the favorite button ....... 238
Bluetooth
® settings ...................... 239
Reset ........................................... 241
COMAND vehicle menu ..................... 242
Setting night security illumination 242
Locator lighting on/off................. 243
Exterior mirror convenience
settings ........................................ 244
Automatic locking on/off............. 245
Activating easy-entry/exit feature 246
Setting interior ambient lighting .. 247
Setting interior lighting delayed
switch-off ..................................... 248
Extending or retracting
rear window sunshade ................. 249
Trunk opening-height restriction*
on/off .......................................... 249

131 Control systems
COMAND video DVD (USA only)
Setting the language and audio format
Select “Video”
“Video”
“Video
DVD”.
Show the menu system, if necessary
(
page 127).
Select “DVD-V”
“DVD Functions”.
Select “Menu Language” or “Audio Lan-
guage”.
In both cases a selection list will ap-
pear. The dotRin front of an entry
indicates the current language.
Changing the setting: Slide qmr or
turn ymz, until you reach the desired
setting.
Saving a setting: Press n.
Exiting the menu: Slide omp.
Subtitles and camera angles
Select “Video”
“Video”
“Video
DVD”.
Show the menu system, if necessary
(
page 127).
Select “DVD-V”
“DVD Functions”.
Select “Subtitles” or “Camera angle”.
In both cases a selection list will ap-
pear. The dotRin front of an entry
indicates the current language.
Changing the setting: Slide qmr or
turn ymz, until you reach the desired
setting.
Saving a setting: Press n.
Exiting the menu: Slide omp.
Interactive content
Selecting an action: Slide qmr or
omp, or turn ymz, until you reach the
desired setting.
Initiating an action: Press n.
A menu appears, the first entry “Se-
lect” is highlighted.
Press n.
iThis function is not available for all DVDs. If
it is available, you can set the language for the
DVD menu and the audio language and/or the
audio format. The number of settings you can
make is determined by the content of the DVD. It
may also be possible to make the settings in the
DVD menu (
page 129).
iThis function is not available for all DVDs.
The number of settings you can make is deter-
mined by the content of the DVD. It may also be
possible to make the settings in the DVD menu
(
page 129).
iDVDs may include interactive content (e.g. a
video game). In a video game you can control the
play by selecting and initiating actions. The type
and number of actions depends on the DVD.

149 Control systems
COMAND telephone*
Illustration: list of phone book entries with
name display and hidden smart speller
1Back to smart speller
2To switch phone book display (“123” or
“ABC”)
3Symbol + for several telephone num-
bers (subentries) under the main entry,
subentry list is closed
4To call up options
5Symbol / for open subentry list
6List of phone book entries
7Subentry list with category symbols
and telephone numbersSwitching from the list to the smart
speller: Select “Back” from the list.
or
Press back button L in the center
console (
page 86).
Changing phone book display in the
list: Select “123” or “ABC”.
The screen changes to telephone num-
ber or name display.Closing the COMAND phone book
In the smart speller, select “Back”.
or
Press back button L in the center
console (
page 86).
Selecting an entry in the COMAND
phone book
Selecting entries using the smart speller
Switch from the list to the smart speller
if necessary.
Changing smart speller language:
Select !.
Select desired language.
iThe following options are available under
“Options” menu item 4:

Displaying details about an entry
(
page 150)

Creating a new entry in the address book
(
page 151)

Deleting an entry (page 152)

Saving a phone book entry from mobile
phone in the address book (
page 152)

Adding a telephone number to an address
book entry (
page 154)


151 Control systems
COMAND telephone*
Assigning a New Entry in the Address
Book
Select “Options”
“New Entry” in the
COMAND phone book list.
Selecting a number category:
Select a category, e.g. “Home”.
Selecting a telephone category:
Select a category, e.g. “Land Line”.
Confirming selection: Select “Save”.
The input menu appears with the data
fields.1Data field
2Input mark (cursor)
3Input charactersChanging data field: Slide qmr re-
peatedly until desired data field is high-
lighted.
or
Select [ or ] repeatedly until de-
sired data field is highlighted.
Entering data into a field: Select all
characters one by one from the input
characters line 3.
Toggling upper and lower case for
the input characters: Select & or
(.
Changing language for the input
characters: Select !.
Select desired language.
Changing character set for the input
characters: Select #.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
Displaying special characters as in-
put characters: Select !
“Sym-
bols”.
Returning input characters to nor-
mal characters: Select !
the
desired language.
Moving cursor in the data field:
SelectY or Z.
iThis function is used to create a new entry in
the address book and to enter the data (first
name, last name and telephone number) manu-
ally.


172 Control systems
COMAND navigation system (entering a destination)
The following destination entry options are
available:

Entering a destination by address

Entering a destination from the desti-
nation memory

Entering a destination from the list of
last destinations

Entering a destination from the map

Entering a stopover

Entering a POI
Entering a destination by the address
To enter an address you may proceed as
follows:

Enter state (USA) or province (CDN),
street and town/city

Enter state (USA) or province (CDN),
town/city and street

Enter state (USA) or province (CDN),
town/city and center

Enter state (USA) or province (CDN),
zip code and center

Enter state (USA) or province (CDN),
zip code and streetCalling up the address input menu
Select “Navi”
“Destination”
“Ad-
dress Entry”.
The address input menu appears. It
shows a state (USA) or a province
(CDN). Which state or province is
shown depends on the vehicle’s loca-
tion.
1State (USA) or province (CDN)
Warning!G
For safety reasons, only enter a new desti-
nation when the vehicle is stationary.
iIt is possible to enter a destination regard-
less of whether route guidance is active or inac-
tive.
iIt is not possible to enter an address when
the vehicle has exceeded a certain speed. As
soon as the vehicle speed drops below a certain
value, the function is available again.
iIf Russian or Chinese is set as the system
language, the address must be entered using
Latin letters. Setting the system language
(
page 238).
iAs additional information to the street entry,
you can enter either a house number or an inter-
section.
A zip code entry replaces the town/city entry.

192 Control systems
COMAND navigation system (entering a destination)
While the characters are being selected as
described below, the top list entry 1 al-
ways shows the destination which best
corresponds to the input data as it has
been entered up to that point.
At the same time, COMAND automatically
supplements characters 2 entered by the
user with appropriate characters 3.
Changing language for the input
characters: Select!.
Select desired language.
Changing character set for the input
characters: Select#.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
Selecting characters: Slide omp or
rotate ymz.
Confirming character selection:
Press n.
Deleting individual characters:
Select) in the bottom line and
pressn.
Deleting an entire entry: Select) in
the bottom line and press n until the
entire entry is deleted.
Canceling an entry: Select “Back” in
the bottom line and press n.
or
Press back button L in the center
console (
page 86).
As soon as COMAND can clearly attribute
the characters entered to a destination,
the input characters 4 disappear.
You see the destination memory list with-
out input characters. Here you can confirm
the current entry or make another selec-
tion.
You can also manually switch to the desti-
nation memory list without input charac-
ters at any time.
Switching manually to the destina-
tion memory list without input char-
acters: Slide qm.
or
Select ? in the second line from the
bottom and press n.
Destination memory list without input
characters
Selecting a destination: Slide qmr or
rotate ymz.
Canceling selection: Press back but-
ton L in the center console
(
page 86).

213 Control systems
COMAND navigation system (route guidance)
Navigation announcements
Route guidance is already active.Calling up a current announcement:
Select “Navi”
6.
or
Press P favorite button if the button
has been programmed with this func-
tion (
page 238).
Canceling navigation message:
Briefly press F shortcut button dur-
ing an announcement.
Switching off navigation messages:
Press and hold F during an an-
nouncement until the announcement is
switched off.
You will see the message “The driving
instructions have been muted.” for a
short while.
Switching navigation announce-
ments back on manually:
Select “Navi”
6.
Adjusting volume of the messages:
Adjust the volume during an automatic
announcement (
page 96).
or
Call up an announcement manually us-
ing “Navi”
6 and adjust the vol-
ume (
page 96).
Warning!G
Navigation announcements are intended to
direct you while driving without diverting
your attention from the road and driving.
Please always use this feature instead of
consulting the map display for directions.
Consulting the symbols or map display for
directions may cause you to divert your at-
tention from driving and increase your risk
of an accident.
iIf Russian or Chinese is set as the system
language, the navigation announcements are in
English. You will find how to set the system lan-
guage on (
page 238).
Navigation announcements are muted during
telephone calls. You can, however, call up a cur-
rent announcement at any time. You can also
call up a current announcement at any time if
you have missed an announcement.
iYou will find the button programming on
(
page 238).
iThe announcements remain switched off
even if you start a new route guidance or if
COMAND is switched off/on with theo but-
ton.
If you switch COMAND off by removing the
SmartKey from the starter switch and then
switch the ignition back on after more than
3 minutes, the announcements are automatical-
ly switched back on.

225 Control systems
COMAND address book
Selecting an entry in the main address
book display
Slide omp or rotate ymz until the
main area is selected.
Creating a new address book entry
Select “Telephone”
“Telephone”

“Address Book”
“New Entry”.
The input menu appears with the data
fields and the input characters.
Illustration: input menu for private data
1To switch between work and home
data ( or symbol)
2Selected data field with input mark
(cursor)
3Display of set data type – in example
display, home data is set ( symbol
and “Home” display)
4Input characters
Switching between private and
business data: Select symbol 1.
The display switches to private or busi-
ness data, depending on the previous
status.
Changing data field: Slide rmq re-
peatedly until desired entry is highlight-
ed.
or
Select [ or ] repeatedly until de-
sired entry is highlighted.
Entering data into a field:
Select desired characters one by one
from the input characters.
Toggling upper and lower case for
the input characters: Select& or
(.
Changing language for the input
characters: Select!.
Select desired language.
iPlease observe the following when creating
a new address book entry:
You can define your own address in the destina-
tion memory in navigation mode. When defining
the address, you can transfer data already en-
tered as an address book entry.
In the address book entry, the town/city and
street must be spelled in the same way as the
destination entry so that the data matches the
digital map data.
In order for the state (province) to match the
map data, its complete name or abbreviation
may be entered.
Examples:

Florida or FL

Colorado or CO

Alberta or AB

Ontario or ON


227 Control systems
COMAND address book
Entries with category symbol 3 come
from the mobile phone. The following cate-
gory symbols are possible:

= symbol for “Mobile” category

= symbol for “Home” category

= symbol for “Work” category

= symbol for “Fax” category

= symbol for “Pager” category

= symbol for “Main” category or for
unknown category or for phone entries
that are saved on the SIM card of a
GSM mobile phone
Entries without a category symbol or with
the or symbols come from the
COMAND address book. All other entries
come from the mobile phone and are only
visible when the mobile phone is in the cra-
dle*.
Entries with the symbol contain a voice
entry (
page 232). It is possible to add
voice entries in vehicles with Voice Con-
trol*.Entries with the symbol contain com-
plete, navigable address data from the nav-
igation system that correspond to digital
map data. It is possible to quickly start
route guidance to these types of entry
(
page 231).
Switching from the smart speller to the
list
Slide mq repeatedly or press n until
the smart speller is hidden.
or
Select ?.
Switching from the list to the smart
speller
Select “Back” from the list.
Searching
Searching via the smart speller
Switch from the list to the smart speller
if necessary.
Changing smart speller language:
Select!.
Select desired language.
Changing smart speller character
set: Select#.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
Entering characters: Select the char-
acters one by one of the entry you are
searching for.
Deleting individual characters:
Select) and briefly press n.
Each time you enter or delete a charac-
ter, the closest match will be displayed
at the top of the list.
Deleting an entire entry: Select)
and press and hold n until the entry is
deleted.