light MERCEDES-BENZ SL-Class 2003 R230 Comand Manual

104 TelephoneSMS function1Current SMS message is highlighted,
telephone number or name (if it is in
the phone book), date and time appear
in brown
The SMS messages (max. 10) are listed
in the order when they were received.

Use the appropriate arrow symbols to
page through the list.

Turn the right-hand rotary/push-
button v to highlight the desired SMS
message is and press to confirm.
The SMS message will appear.
SMS view2Deletes displayed SMS message
Reading SMS messages received
P82.85-9151-31
1
P82.85-9152-31
2

105 Telephone
SMS function
Deleting an SMS message
1Deletes current SMS message
2SMS message is not deleted

Press the right-hand rotary/push-
button v to highlight “Delete” and
press to confirm.
The menu “Delete SMS” will appear.

Press the right-hand rotary/push-
button v to confirm “Yes”.
If there was only one SMS message:
The message is deleted, the main tele-
phone menu will appear.
If there are other SMS messages:
The message is deleted, the next SMS
message will appear.If you do not want to delete the SMS mes-
sage:

Turn the right-hand rotary/push-
button v to highlight “No” and press
to confirm.
The SMS view will appear.
P82.85-9153-31
1
2
iYou can also delete an SMS message by
pressing r.
After you have deleted the oldest SMS
message, COMAND highlights the cur-
rent SMS message in the list.

107 Telephone
Emergency call
If there is an active Tele Aid call, the tele-
phone main menu will disappear and you
will see the message “Phone off”.
After the Tele Aid call is ended, the tele-
phone main menu will reappear.
See your vehicle’s operator’s manual.Initiating an emergency call
If the telephone main menu or a memory
menu is displayed:

Press number key 1 longer than 2 se-
conds (quick-dialing).
The telephone begins dialing, the “End”
button is highlighted.
When the call is initiated, the call time
will appear.
Do not place the emergency call

Turn the right-hand rotary/push-
button v to highlight the “End” button
and press to confirm or press *.
Ending the call, use one of the three ways:

Press the right-hand rotary/push-
button v to confirm the “End” button.
or

Press a.
or

Press *.
P82.85-9154-31
Telephone is ready for operationiPlease ensure that the number stored in
the memory location is the number you
want to dial in case of an emergency
(default is 9-1-1).
The function will also be performed if
the telephone is locked.
P82.85-9155-31

108 TelephoneService numbers

Service numbers1Personal Service Number
2Number for Roadside Assistance

Turn the right-hand rotary/push-
button v to highlight “Service No.” in
the main telephone menu and press to
confirm.
The menu “Service No.” will appear.

Use the right-hand rotary/push-
button v to highlight the service you
require and press to confirm.
The main telephone menu will appear.Begin dialing

Press the right-hand rotary/push-
button v to confirm the “Send” but-
ton.
One of the messages “Personal Service
Number” or “Roadside Assistance” will
appear. The “End” button is highligh-
ted.
When the call is initiated, the call time
will appear.
Ending a call, use one of the three ways:

Press the right-hand rotary/push-
button v to confirm the “End” button.
or

Press a.
or

Press *.
Calling a service number
P82.85-9156-31
12

109 Telephone
Service numbers

Turn the right-hand rotary/push-
button v to highlight “Change 1” in
the “Service No.” menu and press to
confirm.
The “Change Service No. 1” menu will
appear.

Enter the new service number with
number keys 1 through 0.

Press the right-hand rotary/push-
button v to confirm the service num-
ber.
The new service number is now stored
in the “Service No.” menu.
Returning to the menu “Service No.”
The menu “Service No.” will appear auto-
matically after 7 seconds
or

Press *.
Changing personal service number
P82.85-9157-31
iPressing the right-hand rotary/push-
button v and inserting an empty input
line will delete the personal service
number.

110 TelephoneService numbers
Turn the right-hand rotary/push-
button v to highlight “Change 2” in
the “Service No.” menu and press to
confirm.
The “Change Service No. 2” country list
will appear.Selecting a new country service number
from the list

Turn the right-hand rotary/push-
button v to highlight the country ab-
breviation you want and press to con-
firm.
The new service number is now stored
in the “Service No.” menu.
Returning to the menu “Service No.”
The menu “Service No.” will appear auto-
matically after 7 seconds
or

Press *.
Changing the number for Roadside
Assistance
P82.85-9158-31

112 NavigationImportant notes

Important notesWarning
G
For safety reasons, you should only enter a
destination when the vehicle is stationary.
When the vehicle is in motion, a passenger
should enter the destination. Study manual
and select route before driving.
Do not watch display screen or operate but-
tons while the vehicle is in motion - let voice
instructions guide you. Stop at a safe locati-
on before using buttons or making correc-
tions.
Traffic regulations always have priority over
any route recommendations given.
The route calculated by COMAND is a re-
commendation on how to best reach your
selected destination.
During route guidance, you will not receive
any information on
Traffic lights

Stop and yield signs

Parking or stopping zones

One-way streets

Narrow bridges

Similar traffic regulation data
You should therefore always strictly observe
traffic regulations while driving. Drive care-
fully and always obey traffic laws and road
signs even if they contradict COMAND in-
structions.

118 NavigationQuick reference
Function
Page
15
Turn to
Highlight menu field, list
entry or character
Alter the map scale
Press to
Confirm entry/selection,
start function or activate
submenu
Activate map scale se-
lector
133
133
16
Turn to
During voice output:
Lower (left)/raise (right)
the volume
Press to
Repeat current route in-
structions
17
Requesting and dis-
playing Info Services
System settings
184
187
18
Color screenFunction
Page

123 Navigation
Destination input
Select one of the following possibilities to
enter a destination:
Entering a destination address

Selecting destination via the map
(page 131)

Entering Points of Interest
(page 137)

Selecting last destinations
(page 141)

Selecting from destination memory
(page 174)
Main address menu1Info/status line
2Selecting city/suburb or selecting des-
tination that has been entered at last
3Selecting a street
4Selecting a city center (
page 130)

Press the right-hand rotary/push-
button v in the main destination input
menu and confirm “Address”.
The main address menu will appear.
Switch back to the main destination input
menu

Press *.
Entering destination address
iIf you have previously entered a city/
suburb, you can highlight 3 and 4.

124 NavigationDestination inputSelecting city/suburb“City/Suburb Entry” input menu 5Input line, selected characters (invers)
or last city selected
6Character set
7The character selected appears magni-
fied
8Moves the insertion point one position
to the right
9Activates the city list

Press the right-hand rotary/push-
button v in the main address menu
and confirm and confirm “City/Sub-
urb”.
The input menu “City/Suburb” will ap-
pear.
To adopt the city last selected:

Activate the city list.
To select another city:

Turn the right-hand rotary/push-
button v until the desired letter in
character set 6 is highlighted.
The character selected appears magni-
fied 7.

Press the right-hand rotary/push-
button v to enter the character in in-
put line 5.
COMAND supplements the new entry
with additional letters so that the
stored name of a city/suburb will ap-
pear.

Enter other characters until the desired
city name appears in 5.
Correcting the entry

Last character entered
Press r briefly.

All of the characters entered
Press r longer than 2 seconds.
iFor quicker input, COMAND will offer
available characters from the character
set 6 based on your selections and the
names of the cities stored on the navi-
gation CD.