display MERCEDES-BENZ SL-Class 2004 R230 Comand Manual

209
Info Services*/System settings
System settings
Setting the time in increments of 30 mi-
nutes
You can set the the time to any local time
(time zone) in increments of 30 minutes.
1COMAND receives GPS time
2Setting the clock (increments of 30 mi-
nutes)
3Selects the country and the time zone
(
page 210)
4Selects the time format (
page 214)

Turn the right-hand rotary/push-button
v to highlight “Date/Time...” in the
settings menu and press to confirm.
The menu displays the date and the
time, minutes are highlighted.Activating the setting mode

Press the right-hand rotary/push-
button v.
Setting mode is active, the minutes will
appear in red.
P82.85-7714-312
3
41
P82.85-7715-31

213
Info Services*/System settings
System settings
Manually setting date and clock
You must manually set the date and clock,
if
COMAND does not receive a GPS time

the clock has been disconnected from
the vehicle battery

the dates of the change between sum-
mer and winter time are not available
Date/time menu1Day, month, year, hours, minutes
Day is highlighted when the menu
appears
Turn the right-hand rotary/push-button
v to highlight “Date/Time...” in the
settings menu (
page 206) and press
to confirm.
The menu displays date and time.Setting

Press the right-hand rotary/push-
button v.
The day appears in red letters, setting
mode is active.
Moving the day forward or back

Turn the right-hand rotary/push-button
v to the right or left.

Press the right-hand rotary/push-
button v.
The day appears in black letters, set-
ting mode is switched off. The cursor
moves one position to the right.

Repeat the operating steps to subse-
quently change month, year, hours and
minutes.
P82.85-7719-31
1

214Info Services*/System settingsSystem settingsAdopting settings
Press the right-hand rotary/push-
button v longer than 2 seconds.
The main system settings menu will ap-
pear with the changed settings.Selecting the time format
1Date display in day, month format
2Date display in month, day format
3Time display in 24-hour format
4Time display in 12-hour format
P Setting is active
Q Setting is not activeIn the “Date/Time” menu

Turn the right-hand rotary/push-button
v to highlight “Time format” and press
to confirm.
The “Time format” menu will appear.
Setting

Turn the right-hand rotary/push-button
v to highlight the desired entry and
press to confirm. A checkmark will ap-
pear P.
iIf you have selected an invalid setting,
the message “Invalid input” will appear.
iIf the 12-hour format is selected, either
AM (a
nte m
eridiem) or PM (p
ost m
eri-
diem) will appear after the time.

216Info Services*/System settingsSystem settings1Changes by pressing Ä
2Changes by pressing Ä and ambient
light sensor
P Setting active
Q Setting not activeIf the settings menu (
page 206) is dis-
played

Turn the right-hand rotary/push-button
v to highlight “Display (day/night)...”
and press to confirm.
The “Display (Day/Night)” menu will
appear. The setting 2 is active, when
calling up the menu for the first time.

Turn the right-hand rotary/push-button
v to highlight the desired setting and
press to confirm.
The desired setting is active.
Setting 2 has been selected
When the light sensor senses low ambient
lighting conditions, the screen will change
to night display.Changing the display

Press Ä to access the following dis-
plays in succession.
Day display

Night display

Screen off

and the Day display again
Setting the display dimming charac-
teristics (day and night display)

217
Info Services*/System settings
System settings
If the settings menu is displayed
Turn the right-hand rotary/push-button
v to highlight “Factory settings” and
press to confirm.
An inquiry menu will appear. “Yes” is
highlighted.
Accepting the factory settings

Press the right-hand rotary/push-
button v.
A screen with the factory setting will
appear for 8 seconds.
The main system settings menu is reac-
tivated.The factory settings are:

Acknowledgement beep – off

Info beep – off

Language – English (imp.)

Time display – 24 h

Date format –DD.MM (day, month)
If you do not wish to reset to factory
settings

Turn the right-hand rotary/push-button
v to highlight “No” and press to con-
firm.
The main system settings menu will ap-
pear.
Resetting all settings to the
factory settings

221 Glossary
Audio source
This includes the systems radio and CD
(CD drive in the control unit and CD
changer) as well as an external source,
e.g. tape player.
COMAND
(Co
ckpit Man
agement and D
ata Sys-
tem)
Information and operating center for
vehicle sound and communications
systems, including the radio and CD
player, as well as for other optional
equipment (CD changer, telephone,
etc.).
Emergency call
This function places a call to a local
9-1-1 provider. It does not initiate a
->Tele Aid* call. Please note that the
9-1-1 emergency call system is a public
service. Using it without due cause is a
criminal offense.GPS
(G
lobal P
ositioning S
ystem)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs CD digital maps for
navigation.
Heading-up
The map is displayed facing driving di-
rection pointing up during route
guidance.
Info Services*
With this function you can request in-
formation on news, weather, stocks,
sports and reminders. Info Services is
an additional optional feature to basic
Tele Aid service. Tele Aid can be initial-
ly activated by completing a subscriber
agreement and placing an acquain-
tance call. Mix
Display representation during destina-
tion guidance. The symbol display is ac-
tivated automatically from the map
display before a turn-off. After you have
made the turn, the map will appear
again.
Multifunction display
Two displays in the combination instru-
ment that show important information
about the COMAND systems radio, CD
and telephone. The displays can be
called up using the control buttons on
the multifunction steering wheel.
Navigation CD
Contains all the destination addresses
(town, road, intersection, house num-
ber, special destinations) and the digi-
tal map material for a country or a
region for destination entry, route cal-
culation and destination guidance.

222 GlossaryNorth-up
The map is displayed facing due north
during route guidance.
Provider
is the network operator who makes
available (provides) telephone services
Roaming
For this function, the telephone uses
the telephone network of a contract
partner. There are home type and non
home type systems. The RM indicator
in the COMAND display indicates that a
call is being made using a non-home
type system.
Service numbers
includes a personal service number
and the number for Roadside Assis-
tance
Service source
This includes the systems telephone,
navigation (voice output during desti-
nation guidance) and ->Voice control
system*SMS
(S
hort M
essage S
ervice)
With this function you can receive, read
and delete short text messages (if SMS
service is provided by your carrier)
Tele Aid*
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and ma-
nual emergency, Roadside Assistance,
and information. Tele Aid is initially ac-
tivated by completing a subscriber
agreement and placing an acquain-
tance call.
The Tele Aid system is operational pro-
vided that the vehicle's battery is char-
ged, properly connected, not damaged,
and cellular and GPS coverage is avai-
lable.Unlock code
Your unlock code prevents unauthori-
zed persons from using your telephone.
The unlock code is a number string,
which you have to enter on switching
on the telephone.
Voice output
During a trip, apart from visual informa-
tions (symbol or map displays),
COMAND also provides all of the
necessary spoken route information
via voice output.
Voice control system*
One of the service sources of
COMAND.
As voice-operated control system, it
controls the COMAND systems via
voice. Refer to the separate operating
instructions.

223 Index
A
Adjust
Sound 63
for audio sources 63
for service sources 64
Sound-center 65
Volume difference 64
Adjusting the volume 14
Amplifier 66
Arrow indicating the direction to the
destination 161
Audio sources 63
Auxiliary audio source 218
connecting 218
B
Beeps 215
Acknowledgement beep 215
Info beep 215
C
Calibration 199CD operation
CD track scan 55
Fast forward/backward 54
Naming CD 55
Deleting a CD name 57
Playback mode 58
Selecting a CD 53
Track select 51
Changing the navigation CD 45, 137
COMAND control unit 6
Cross hairs 150
moving 150
Current vehicle location 150
D
Date and time 208
AM 214
automatic time conversion 212
automatically setting 208
manually setting 213
PM 214
selecting country and time zone 211selecting time format 214
setting the time in 30 minute
steps 209
Day and night display 22, 216
Destination
confirming on the map 152
Destination address 141
Points of Interest 155
requesting 165
saving 193
selecting the last destinations 159
selecting via the map 149
Destination and route information 165
Location map 167
Route list 166
Route map 169
Stop-over (way point) 169
Destination flag 188
Destination memory
deleting a destination 197
sorting 196

225 Index
M
Main menu structure 9
Map
altering the map scale 151
Compass needle 177
Heading-up 177
Map with cross hairs 150
moving the cross hairs 150
North arrow 177
North-up 177
Symbol for current vehicle
location 177
Memory functions
Radio operation 34
Menu
“City/Suburb” input menu 142
“Destination info” selection
menu 165
“Incoming calls memory” 112
“Phone book” 116
“Phone book” selection menu 105“Points of Interest” selection
menu 155
“Settings” 206
“Street” input menu 144
“Way point” 178
Category list 155
Main address menu 141
Main destination entry menu 140
Main destination memory menu 192
Main radio menu FM 28
Main system setting menu 202, 205
Phone book page (names) 106
Phone book pages (phone
numbers) 108
Ready for operation display
(Telephone) 96
SMS view 122
Traffic jam menu 182
Menu fields 9
Menu overview
CD operation 48Destination input 138
Radio operation 26
Telephone mode 94
Message
“Being activated” 61
“CALC. ROUTE” 163
“Caution. COMAND will shut down
now”. 10
“Caution. Please start engine. Otherwi-
se COMAND will shut down in 10
seconds” 10
“Caution. Please start engine. Otherwi-
se COMAND will shut down in 3
minutes” 10
“CD Magazine empty” 60
“CD-Reading error. Please use another
CD” 140
“Compiling sorted destination
list” 192, 197
“DEST AREA” 163
“Destination memory is full” 193

226 Index
“Error” 61
“Loading CD ...” 50
“Manual route exclusions have been
reset” 187
“Navigation cannot be activated. An er-
ror has occurred” 140
“NEW ROUTE” 163
“No CD available. Please insert NAVI-
CD type DX only” 140
“No CD changer” 60
“No CD” 60
“No magazine” 60
“NO ROUTE” 163
“No telephone” 87
“OFF ROAD” 163
“Personal service number” 126
“Reading error” 61
“Roadside Assistance” 126
“SMS loading...” 121
“Telephone defective” 87“Telephone is being activated. Please
wait.” 87
“Temperature is too high” 61
“The route list is being
calculated” 183
“Voice output is muted” 171
CALL 97
Mix 175
Multifunction display 11
CD operation 62
Radio operation 40
Telephone mode 89
Display overview 90
Muting 28, 75
CD playback 60
N
Notebook 115
O
Outgoing calls 100P
Phone book 116
adding an entry 119
changing entries 116
deleting an entry 119
Phone number
begin dialing 101
correcting 101
interrupt dialing 101
Points of Interest
entering 155
Q
Quick reference
CD operation 42
Navigation 134
Radio operation 24
Quick reference COMAND 12
R
Radio station
automatically saving 36