key MERCEDES-BENZ SL-Class 2008 R230 Comand Manual

25 At a glance
Navigation operating elements
Function
Page
1
Soft keys(multifunction keys)
2
Color screen with
Navigation main menu
3
E Confirm
4
H,h,g,GF,fFunction selection
5
JDuring a voice instruction:Muting current voiceinstructionSwitching off voiceinstructions
152152
Function
Page
6
jRepeating current voice
instructionSwitching on voiceinstructions
151152
7
Volume control
35
8
e Switching on and off
34
9
bNavigation main menuDuring route guidance:Change over to navigation
displayCancelling route guidance
130152159
a
c Switches to map display
152

27 At a glance
Service operating elements
Function
Page
1
Soft keys(multifunction keys)
2
Color screen with Service
main menu
3
1 - 0Input functions
4
E Confirm
5
H,h,g,GF,fFunction selection
6
e Switching on and off
34
7
CService main menu
184

31 At a glance
Menu system


Menu system
The menu system allows for easy
operation of COMAND. Main menus are provided for the following
main functions:
Audio(Radio, CD, CDC, MP3-CD, DVD)

Satellite radio

Telephone*

Navigation

Service
Calling up main menus Audio (
 page
42):

Press A.
Satellite radio (
 page
92):

Press B.
Telephone* (
 page
108):

Press a.
Navigation (
 page
130):

Press b.
Service (
 page
184):

Press C.
Menu displayA display may consist of three areas.Example: FM menu
1Soft key sections2Main area3Status barThe functions currently assigned to the
soft keys are displayed in the soft key
sections 1.
iA maximum of five soft keys may be
displayed on each side of the main area
2.

32 At a glanceMenu systemThe main area 2 shows messages and
settings.You can change the settings by operating
the system.The status bar 3 is divided into three
areas.Left side: The current operating mode is indicated. In
this example: RadioCenter:The status of the current operating mode
or other selectable functions are indicated.In this example:
FM
= current waveband

9
= memory location of station,

e.g. “9”
Right side:General status information is indicated
independent of the operating mode.In this example:
Ready
= Telephone* is ready for
operation

= Reception strength of the
mobile phone
Menu functions and submenusUsing the soft keys, functions can be
switched ON or OFF, or submenus can be
called up.
Example: Radio main menu:
The
FM/AM
soft key switches between
FM and AM band.

The
Scan
soft key starts/stops the
channel scan.
In some situations, soft keys may not have
any function and are not operational. A
soft key without function appears shaded
out.

33 At a glance
Menu system
Example Phone book:Page v
1 soft key
Exiting from submenusUse the
Back
soft key to exit a submenu.
The display switches to the next higher
menu level.
The system will save all changes you have
made. There are exceptions in which
pressing the
Back
soft key will not result in
the settings being saved. The exceptions
are expressly described on the following
pages.

34 At a glanceQuick reference COMAND

Quick
reference
COMAND
Switching on
Turn the key in the steering column
lock to position 1 or 2.
or
Press e.In both cases, the system will activate
the operating mode which was active
when the system was switched off.
Switching off
Turn the key in the steering column
lock to position 0 and pull the key out.
or
Press e.
The volume is adjusted jointly for the
telephone*, the navigation system and the
Voice control system.The volume setting applies to other
operating modes as well: Radio, CD,

CD changer, MP3-CD and DVD.When you adjust the volume, the system
will automatically store the setting for the
current operating mode. The volume for
the navigation announcements can only be
changed while an announcement is being
made.
iYou have the following options to
control the system:
at the COMAND

at the multifunction steering wheel
(refer to vehicle Operator’s Manual)

using the Voice control system*
(refer to separate operating
instructions for further information)
This Operator’s Manual describes the
control at the COMAND.Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
Switching the COMAND control unit
on and offiIf the key is not in the steering lock in
position 1 or 2, the system will
automatically stop after around 30
minutes. A warning is displayed prior to
the system switching off.
Volume

35 At a glance
Quick reference COMAND
Adjusting the volume
At the COMAND, turn the rotary control
at the e key.
or
Press J or I on the
multifunction steering wheel.The volume is turned up or down
depending on the direction of rotation
or the key pressed.The system remembers the volume
setting when it is switched off. When the system is switched on again,
the volume may be lower than at the
time when the system was switched
OFF. This will be the case when the volume
was adjusted to a value outside a
certain range when the system was
switched off.
The automatic volume control feature
adjusts the volume depending on:
vehicle speedor

ambient noise inside the vehicle

other parameters (e.g. windows open
or closed)

36 At a glanceQuick reference COMANDCommon balance settings apply to the
following sytems:
Radio operation

Single CD operation (
CD
)

CD changer operation (
CD
)

MP3-CD operation

DVD operation

Satellite radio
Different balance settings can be set for
navigation and telephone*.
The balance settings for navigation
announcements are described at “Audio
settings for the navigation
announcements”
( page
133)
.
When you change balance settings, the
system will automatically save the settings
for the current operating mode and others.In Radio, CD, CDC, MP3-CD, DVD or
satellite radio operation:

Press the
Balance
soft key.
Cross-hairs are displayed. The
horizontal line indicates the balance
setting. You can now make balance
settings.

37 At a glance
Quick reference COMAND

Press H or h.Move the cross-hairs horizontally and
adjust the balance.

Press E or the
Back
soft key.
or
Wait until the display changes.The new setting is saved.
Different bass and treble settings are
possible for the following operating
modes:
Radio operation (FM and AM band)

Single CD operation (
CD
)

CD changer operation (
CD
)

MP3-CD operation

DVD operation

Satellite radio operation

Navigation operation
The Bass/Treble settings for navigation
announcements are described at “Audio
settings for the navigation
announcements”
( page
133)
.
When you adjust Bass or Treble, the
system will automatically save the settings
for the current operating mode.In Radio, CD, CDC, MP3-CD, DVD or
satellite radio operation:
Press the
Bass
or
Treble
soft key.
The Bass or Treble menu will appear.
You can now make bass or treble
settings
( page
38)
.

38 At a glanceQuick reference COMAND
Activate the Bass or Treble menu ( page
37)
.

Press H or h.Bass or Treble is adjusted.

Press E or the
Back
soft key.
or
Wait until the display changes.The new setting is saved.
The sound functions will be available for
the following operating modes.
Radio operation

Single CD operation (
CD
)

CD changer operation (
CD
)

MP3-CD operation

DVD operation

Satellite radio operation
The following sound functions are
available:
Factory Setting:COMAND set the sound functions to
factory setting for the active source
mode.

Default:COMAND set the sound linear for the
center of the vehicle.

Speech optimized:Playback optimized for language
comprehensibility.
You can use different sound functions for
the modes mentioned above.Example: For CD operation the function

Default
, for DVD operation the function
Speech optimized
.