ESP MERCEDES-BENZ SL CLASS 2018 Owner's Manual

X
To restore the factory settings: press and
hol dd ow nt he 6 and 7 buttons simul-
taneousl yf or approximatel ys ix seconds until
the battery check lamp ( Y
page 68 )f lashes
twice.
Mechanical key
General notes If the vehicl ec an no longer be locked or
unlocke dw it ht he SmartKey or with KEYLESS-
GO ,u se the mechanical key.
If yo uu se the mechanical key to unlock and
open the driver's door or the trunk lid, the anti-
thef ta la rm system will be triggered .S witch off
the alarm ( Y
page 64).
Removing the mechanical key
X
Push release catch C in the direction of the
arrow and at the same time remove mechan-
ica lk ey D from the SmartKey.
For further informatio na bout :R
unlocking the driver's door ( Y
page 72)R
unlocking the trunk ( Y
page 73)R
locking the vehicl e( Y
page 72)
Insertin gt he mechanical keyX
Push mechanical key D completel yi nto the
SmartKey unti lite ngages and release
catch C is back in its basi cp osition. SmartKey battery
Important safety notes
G WARNING
Batterie sc ontain toxi ca nd corrosive substan-
ces. If batteries are swallowed, it can resul ti n
severe health problems .T here is ar is koff atal
injury.
Kee pb at teries ou toft he reach of children. If
ab at tery is swallowed, see km edica la ttention
immediately.
H Environmental note
Batterie sc ontain pollu-
tants .Itisi llegal to dispose
of them with the household
rubbish. The ym us tbec ol-
lected separatel ya nd dis-
posed of in an environmen-
tally responsibl er ecycling
system.
Dispose of batteries in an
environmentally responsi-
bl em an ner. Take dis-
charge db at teries to aq uali -
fie ds pecialist workshop or
to ac ollectio np oi nt for
used batteries.
The SmartKey batteries contain perchlorate
material ,w hi ch ma yr equire specia lh an dling
and regard for the environment. National guide-
lines must be observed during disposal. In Cal-
ifornia ,s ee www.dtsc.ca.gov/
HazardousWaste/Perchlorate/index.cfm .
Mercedes-Benz recommends tha ty ou have the
batteries replaced at aq uali fied specialist work-
shop. SmartKey 67
Opening and closing Z

tion H .S imultaneousl yp ul lt he trunk li dh an -
dle.
The trunk is unlocked. X
Turn the mechanica lk ey back to position G
and remove it. X
Insert the mechanica lk ey into the SmartKey.
Emergenc yr elease fo rt he trunkYo uc an unlock the trunk li df ro mt he insid ew it h
the emergency release button.
X
Press emergency release button C briefly.
The trunk li du nlocks and opens.
The trunk li dc an be unlocke da nd opene dw it h
the trunk li de mergency release when the vehi-
cle is stationar yorw hile driving.
The trunk li de mergency release does not unlock
the trunk li dift he battery is disconnecte do r
discharged.
Trunk li de mergency release light:R
Emergency release button C flashe sf or
30 minute sa ft er the trunk li diso pe nedR
Emergency release button C flashe sf or
60 minute sa fter the trunk li disc losed
Side windows
Important safety notes
G WARNING
Whil eo pe ning the side windows ,b od yp ar ts
could become trapped between the side win-
do wa nd the door frame as the side window
moves .T here is ar is kofi njury.
Make sure tha tn obod yt ouche st he side win-
do wd ur in gt he opening procedure. If some- body become st rapped ,r elease the switch or
pull the switch to close the side windo wa gain .
G WARNING
Whil ec losing the side windows ,b od yp ar ts in
the closing area could become trapped .T here
is ar is kofi njury.
When closing make sure tha tnop ar ts of the
body ar eint he closing area .Ifs omebody
become st rapped ,r elease the switch or press
the switch to open the side windo wa gain .
G WARNING
If children operate the side windows they
could become trapped ,p ar ticularly if the ya re
left unsupervised .T here is ar is kofi njury.
When leaving the vehicle, always take the
SmartKe yw it hy ou and lock the vehicle. Never
leav ec hildren unsupervised in the vehicle.
Side windo wr eversin gf ea tureThe front side windows ar ee quippe dw it ha n
automatic reversing feature. If as olid object
blocks or restricts the upward movement of one
of the front side windows durin gt he closing
process, the side windo wo pe ns agai na ut omat-
ically. During the manua lc losing process, the
side windo wo nl yo pe ns agai na ut omatically
after the corresponding switch is released. How-
ever, the automatic reversing featur eiso nl ya n
ai da nd does not relieve yo uoft he responsibility
of paying attentio nw he nc losing as id ew in dow.
G WARNING
The reversing featur ed oe sn ot react:R
to soft, light and thi no bj ects ,e .g .s mall fin-
gers R
ove rt he last 1/6 in(4 mm) of the closing
movement R
durin gr esetting R
when closing the side windo wa gain man-
uall yi mm ediatel ya ft er automatic reversing
Thi sm eans tha tt he reversing featur ec annot
prevent someone being trapped in these sit-
uations. There is ar is kofi njury.74
Side windows
Openin ga nd closing

Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the switch
to open the side window again.
Opening and closing the side win-
dows in the front The switches for the front side windows are
located on the driver's door. There is also a
switch for the front-passenger side window on
the front-passenger door.
The switches on the driver's door take prece-
dence.
C
LeftD
Right X
Turn the SmartKey to position G or H in the
ignition lock. X
To open manually: press and hold the cor-
responding switch. X
To open fully: press the switch beyond the
pressure point and release it.
Automatic operation is started. X
To close manually: pull the corresponding
switch and hold it. X
To close fully: pull the switch beyond the
pressure point and release it.
Automatic operation is started. X
To interrupt automatic operation: press or
pull the corresponding switch again.
You can continue to operate the side windows
after you switch off the engine. This function is
available for up to five minutes or until the driv-
er's or front-passenger door is opened. Opening and closing all side windows
Using the switch on the center console
G WARNING
While opening the side windows, body parts in
the closing area could become trapped. There
is ar isk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
somebody becomes trapped, release the
switch or press the switch down to open the
side window again.
You can use the switch on the center console to
close all side windows simultaneously. X
Open the cover in the lower center console.
The switch for all side windows is under the
cover.
X
To open all side windows: press button C
to the point of resistance. X
To open all side windows fully: press
switch C beyond the point of resistance. X
To close all side windows: pull switch C .
All side windows begin the closing procedure
simultaneously .T he rear side windows close
after the front side windows.
If, after opening the windows, you close one side
window using the switch in the door control
panel: R
the front side window closes first and R
then the corresponding rear side window
closes.Side windows 75
Opening and closing Z

Convenience closing with KEYLESS-GO
G WARNING
When usin gt he convenience closin gf eature,
part soft he body coul dbet ra pped in th ec los-
ing area when as ide window is bein gc losed.
Ther eisar is kofi njury.
Observ et he complet ec losin gp rocedure
when th ec onvenience closin gf eature is oper-
ating. Mak es ure that no body part sa re in
close proximity durin gt he closin gp rocedure.
Procee dasf ollows if someon eist ra pped:X
Release th er ecessed sensor surface on the
door handle. X
Immediately pull and hold th ed oor handle
and keep th ed oor handle pulled.
The side windows open.
Wit hK EY LESS-GO you can close all side win-
dows simultaneously. The KEYLESS-GO key
must be outside th ev ehicle .A ll th ed oor sm ust
be closed. X
Touc hr ecessed sensor surface C on the
door handle until th es ide windows are fully
closed.
i Mak es ure you only touch recessed sensor
surface C . X
To interrup tc onvenience closing: release
recessed sensor surface C on th ed oor han-
dle.
Resetting th es id ew indowsIf as ide window can no longer be closed fully,
you must reset it. X
Close all th ed oors. X
Turn th eS ma rtKey to position G or H in the
ignition lock. X
Pull th ec orrespondin gs witch on th ed oor
control panel until th es ide window is com-
pletely closed ( Y
page 75).X
Hol dt he switch for an additional second.
If th es ide window open sa gain slightly:X
Immediately pull th ec orrespondin gs witch on
th ed oor control panel until th es ide window is
completely closed ( Y
page 75).X
Hol dt he switch for an additional second.
If th er espectiv es ide window remains closed
after th eb utto nisr eleased, then it has been
set correctly. If this is no tt he case, repeat the
steps above.
Problem sw ith th es id ew indows
G WARNING
If you close as ide window again immediately after it has been blocke dorr eset ,t he side window
closes wit hi ncreased or maximum force. The reversing feature is then no ta ctive. Part soft he
body coul dbet ra pped in th ec losin ga rea in th ep rocess. This pose sani ncreased ris kofi njury or
eve nf atal injury.
Mak es ure that no part soft he body are in th ec losin ga rea. To stop th ec losin gp rocess, release
th es witch or push th es witch again to reopen th es ide window.76
Sid ew indows
Opening and closing

Problem
Possible causes/consequences and P Solutions
As ide window cannot be
closed because it is
blocked by objects, e.g.
leaves in the window
guide. X
Remove the objects. X
Close the side window.
As ide window cannot be
closed and you cannot
see the cause. If as ide window is obstructed during closing and reopens again
slightly: X
Immediately after the window blocks, pull the correspondin gs witch
again until the side window has closed.
The side window is closed with increased force.
If as ide window is obstructed again during closing and reopens again
slightly: X
Immediately after the window blocks, pull the correspondin gs witch
again until the side window has closed.
The side window is closed without the automatic reversing feature.
The side windows cannot
be opened or closed
using the convenience
opening/closing fea-
ture. The SmartKey battery is discharged or nearly discharged. X
Check the SmartKey battery ( Y
page 68) and replace it if necessary
( Y
page 68).
Roof
Important safety notes
G WARNING
If you do not fully open/close the soft top, the
soft-top hydraulics depressurize after as hort
time. This causes the soft top to lower unex-
pectedly and may cause you or others to be
trapped. There is ar isk of injury.
Always open or close the soft top completely.
G WARNING
Closing the roof manually is ac omplicated
and technically demanding procedure, which
requires al ot of strength. You or others can
become trapped. There is ar isk of injury.
Only have the soft top closed manually at a
qualified specialist workshop.
! Never sit on the rear shelf or store heavy
object st here. You will otherwise damage the
roof and the rear shelf of your vehicle. ! Do not forget that the weather can change
abruptly. Make certain that the roof is closed
when you leave the vehicle. The vehicle elec-
tronics can be damaged if water enters the
vehicle interior.
! When opening and closing the roof, make
sure that: R
there is sufficient clearance, as the roof
swings upwards. R
there is sufficient clearance behind the
vehicle, as the trunk lid swings backwards
beyond the bumper. R
the trunk is only loaded to below the trunk
partition. R
the trunk partition is not pushed up by the
load. R
the trunk partition is closed. R
the trunk lid is closed. R
the outside temperature is above 5‡
(

Exterio rm irrors
Adjusting th ee xterio rm irrors
G WARNING
You coul dl ose control of your vehicle if you do
th ef ollowin gw hile driving:R
adjust th ed river' ss eat ,h ead restraint,
steering wheel or mirrors R
fasten th es eat belt
Ther eisar isk of an accident.
Adjust th ed river' ss eat ,h ead restraint ,s te er-
ing wheel and mirror and fasten your seat belt
before starting th ee ngine.
G WARNING
The exterio rm irror on th ef ront-pa ssenger
side reduces th es iz eoft he image .V isible
object sa re actually closer than they appear.
This mean st ha ty ou coul dm isjudge th ed is-
tance from road user st ra velin gb ehind, e.g.
when changing lane .T her eisar isk of an acci-
dent.
For this reason ,a lways mak es ure of the
actual distanc ef ro mt he road user st ra veling
behin dbyg lancin go ve ry our shoulder.
X
Mak es ure that th eS ma rtKey is in position G
or H in th ei gnition lock.X
Press button C for th el eft exterio rm irror or
button D for th er igh te xterio rm irror.
The indicator lamp in th ec orrespondin gb ut-
to nl ight supinr ed.
The indicator lamp goes out again after some
time. You can adjust th es electe de xterior mirror usin gb utton

The daytime runnin gl amps improve the visibility
of your vehicle during the day. To do this, the
daytime runnin gl amps function must be
switched on using the on-board computer
( Y
page 172).
If the engine is runnin ga nd you turn the light
switch to ` or X ,t he manual settings
take precedenc eo ver the daytime running
lamps.
Low-beam headlamps
G WARNING
When the light switch is set to X ,t he low-
beam headlamps may not be switched on
automatically if there is fog, snow or other
causes of poor visibility due to the weather
conditions such as spray. There is ar isk of an
accident.
In such situations, turn the light switch to
X .
Even if the light sensor does not detect that it is
dark, the parking lamps and low-beam head-
lamps switch on when the ignition is switched on
and the light switch is set to the X position.
This is ap articularly useful function in the event
of rain and fog. X
To switch on the low-beam headlamps:
turn the SmartKey to position H in the igni-
tion lock or start the engine. X
Turn the light switch to X .
The green X indicator lamp in the instru-
ment cluster lights up.
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of thick
fog. Please take not eoft he country-specific
regulations for the use of rear fog lamps. X
To switch on the rear fog lamp: turn the
SmartKey to position H in the ignition lock or
start the engine. X
Turn the light switch to X or X .X
Press the ^ button.
The yellow ^ indicator lamp in the instru-
ment cluster lights up. X
To switch off the rear fog lamp: press the
^ button.
The yellow ^ indicator lamp in the instru-
ment cluster goes out. Parking lamps
! If the battery charge is very low, the parking
lamps or standin gl amps are automatically
switched off to enable the next engine start.
Always park your vehicle safely and in aw ell lit
area, in accordanc ew ith the relevant legal
stipulations. Avoid using the ` parking
lamps over ap eriod of several hours. If pos-
sible, switch on the right-hand d or left-
hand c standin gl amps.X
To switch on: turn the light switch to ` .
The green ` indicator lamp in the instru-
ment cluster lights up.
Standing lamps Switching on the standin gl amps ensures the
corresponding side of the vehicle is illuminated. X
To switch on the standing lamp s: the
SmartKey is not in the ignition lock or it is in
position

X
To switc hont he high-beam headlamps:
turn the light switch to X or X .X
Press the combinatio ns wi tch beyond the
pressure point in the direction of arrow C .
In the X position, the high-bea mh ead-
lamps are onl ys wi tched on when it is dark and
the engine is running.
The blue W indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on. X
To switc ho ff the high-beam headlamps:
move the combinatio ns wi tch back to its nor-
ma lp osition.
The blue W indicator lamp in the instru-
ment cluster goe so ut .
Hazard warning lamps
X
To switc hont he hazard warning lamps:
press button C .
All turn signals flash. If yo un ow switch on a
turn signa lu si ng the combinatio ns wi tch ,o nly
the turn signa ll am pont he corresponding
side of the vehicl ew il lf lash.X
To switc ho ff the hazard warning lamps:
press button C .
The hazard warning lamps automaticall ys wi tch
on if: R
an ai rb ag is deployed orR
the vehicl ed ec elerates rapidly from as peed
of above 45 mph (70 km/h )a nd come stoa
standstill
The hazard warning lamps switch off automati-
cally if the vehicl er eache sas peed of above
6m ph (10 km/h )a gain afte raf ul lb rake appli-
cation.
i The hazard warning lamps stil lo pe rate if the
ignition is switched off. Cornerin gl ig ht functionThe cornering light functio ni mprove st he illu-
minatio noft he roa do ve raw id ea ngle in the
direction yo ua re turning, enabling better visi-
bility in tight bends, for example. The cornering
light functio nc an onl ybea ctivate dw he nt he
low-bea mh eadlamps are switched on.
Active: R
if yo ua re driving at speed sb elow 25 mph
(40 km/h )a nd switch on the turn signa lo r
turn the steering wheel R
if yo ua re driving at speed sb et ween 25 mph
(40 km/h )a nd 45 mph (70 km/h )a nd turn
the steering wheel
The cornering lamp ma yr emai nl it for as hort
time ,b ut is automaticall ys wi tched off afte rn o
more tha nt hre em inutes.
Cornerin gl ig ht functio nw it ht raffi cc ir cle
function:
The cornering light functio ni sa ctivate donb ot h
side sb ef ore entering at raffic circle throug ha n
evaluation of the current GP Sp osition of the
vehicle. It remains active unti la fte rt he vehicle
ha sl ef tt he traffic circle .Int hi sw ay ,p edes trians
crossing the road, for example, are illuminated
by your vehicl eing oo dt ime.
Active light function The active light functio ni sas ys tem tha tm oves
the headlamps according to the steering move-
ments of the front wheels .Int hi sw ay ,r elevant
areas remai ni llum inated whil ed riving .T his
allows yo utor ecognize pedestrians ,c yclists
and animals sooner.
Active: when the lights are switched on.
Vehicles with Lane Keeping Assist: the active
light functio ne valuate st he course of the lane in
which yo ua re driving and pre-emptively con-
trol st he active light function.
Adaptiv eH ighbeam Assist
General notes
Yo uc an us et hi sf unctio ntos et the headlamps
to change between lo wb ea ma nd high beam
automatically. The system recognizes vehicles
with thei rl ig hts on, either approaching from the
opposite direction or traveling in front of yourExterior lighting 97
Lights and windshield wiper s Z

vehicle, and consequently switches the head-
lamp sf rom high bea mtol ow beam.
The system automatically adapts the low-beam
headlamp range depending on the distance to
the other vehicle. Once the system no longer
detects any other vehicles, it reactivates the
high-beam headlamps.
The system' so ptical sensor is located behind
the windshiel dn ear the overhea dc ontrol panel.
Important safety notes
G WARNING
Adaptive Highbeam Assist does not recognize
road users: R
who have no lights, e.g. pedestrians R
who have poor lighting, e.g. cyclists R
whos el ighting is blocked ,e .g. by ab arrier
On very rare occasions, Adaptive Highbeam
Assist may fail to recognize other road users
that have lights, or may recognize them too
late. In this, or in similar situations, the auto-
matic high-beam headlamp sw il ln ot be deac-
tivated or wil lbea ctivated regardless. There is
ar isk of an accident.
Always carefully observe the traffic conditions
and switch off the high-beam headlamp si n
good time.
Adaptive Highbeam Assist cannot take into
account road ,w eather or traffic conditions.
Adaptive Highbeam Assist is only an aid .Y ou are
responsible for adjusting the vehicle's lighting
to the prevailing light, visibility and traffic con-
ditions.
In particular, the detection of obstacles can be
restricted if there is: R
poor visibility, e.g. due to fog, heavy rain or
snow R
dirt on the sensors or the sensors are
obscured Switching Adaptive Highbeam Assist
on/off X
To switch on: turn the light switch to X .X
Press the combination switch beyond the
pressure point in the directio nofa rrow C .
The

Where possible, avoid spinnin gt he drive
wheels when pulling away on slippery roads.
You could otherwise damage the drive train.
Key positions
SmartKey
Z
To remove the SmartKeyG
Power supply for some consumers, such as
the windshield wipersH
Ignition (power supply for all consumers)
and drive positionI
To start the engine
i The SmartKey can be turned in the ignition
lock even if it is not the correct SmartKey for
the vehicle. The ignition is not switched on.
The engine cannot be started.
KEYLESS-GO
General notes Vehicles with KEYLESS-GO are equipped with a
SmartKey featuring an integrated KEYLESS-GO
start function and ad etachable Start/Stop but-
ton.
The Start/Stop button must be inserted in the
ignition lock and the SmartKey must be in the
vehicle.
When you insert the Start/Stop button into the
ignition lock, the system needs approximately
two seconds recognition time. You can then use
the Start/Stop button.
Pressing the Start/Stop button several times in
succession corresponds to the differen tk ey
positions in the ignition lock. This is only the
case if you are not depressing the brake pedal. If you depress the brake pedal and press the
Start/Stop button ,t he engine start si mmedi-
ately.
Ac heck which periodically establishes ar adio
connection between the vehicle and the Smart-
Key determines whether av alid SmartKey is in
the vehicle. This occurs ,f or example, when
starting the engine.
To start the vehicle without actively using the
SmartKey: R
the Start/Stop button must be inserted in the
ignition lock. R
the SmartKey must be in the vehicle. R
the vehicle must not be locked with the
SmartKey or KEYLESS-GO ( Y
page 65).
Do not keep the SmartKey: R
with electronic devices, e.g. am obile phone
or another SmartKey. R
with metallic objects, e.g. coins or metal foil. R
inside metallic objects, e.g. am etal case.
This can impair the functionality of the KEY-
LESS-GO key.
If you lock the vehicle with the SmartKey's
remot ec ontrol or with KEYLESS-GO, after a
short time: R
you will not be able to switch on the ignition
with the Start/Stop button. R
you will not be able to start the engine with the
Start/Stop button until the vehicle is
unlocked again.
The engine can be switched off while the vehicle
is in motion by pressing and holding the Start/
Stop button for three seconds. This function
operates independently of the ECO start/stop
automatic engine switch-off function.
Key positions with KEYLESS-GO
C
Start/Stop button
D
Ignition lock116
Driving
Driving and parking