display MERCEDES-BENZ SL CLASS 2018 Owner's Manual

Problem
Possible causes/consequences and P Solutions
The engine is not running
smoothly and is misfir-
ing. There is am alfunction in the engine electronics or in am echanical
componen toft he engine management system.X
Only depress the accelerator pedal slightly.
Otherwise, non-combusted fuel may get into the catalytic converter
and damage it. X
Have the cause rectified immediately at aq ualified specialist work-
shop.
The coolant temperature
gauge shows av alue
above 248 ‡( 120 †).
The coolant warning
lamp may also be on and
aw arning tone may
sound. The coolant level is too low. The coolant is too hot and the engine is no
longer being cooled sufficiently. X
Stop as soon as possible and allow the engine and the coolant to
cool down. X
Check the coolant level ( Y
page 235). Observe the warning notes
as you do so and add coolant if necessary.
If the coolant level is correct ,t he engine radiator fan may be faulty. The
coolant is too hot and the engine is no longer being cooled sufficiently. X
At coolant temperatures below 248 ‡( 120 †), drive to the nearest
qualified specialist workshop. X
Avoid heavy loads on the engine as you do so, e.g. driving in moun-
tainou st errai na nd stop-and-go traffic.
DYNAMIC SELEC Tb uttonUse the DYNAMIC SELECT button to change the
drive program. Depending on the drive program
selected the following vehicle characteristics
wil lc hange: R
the drive (engine and transmission manage-
ment) R
the suspensio nort he adaptive adjustable
damping (only on vehicles with AMG RIDE
CONTROL sports suspension) R
the sound of the exhaust system (vehicles
with sports exhaust system) R
the steering R
the availability of the ECO start/stop function
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C is
activated. For further information about starting
the engine, see ( Y
pag e1 17). X
Press DYNAMIC SELECT button C as many
times as necessary until the desired drive
progra miss elected.
The selected drive progra ma ppears in the
multifunction display. After as hort period of
time, the displa yg oes out and the symbol for
the selected drive progra ma ppears.
In addition, the current drive progra ms ettings
are displayed briefly in the multimedi as ystem
display.
i In af ew countries, the ECO start/stop func-
tion is deactivated at the factory due to the
available fuel grade. In this case, the ECO
start/stop function is not available in anyDYNAMI CS ELEC Tb utton 121
Driving and parking Z

drive program, regardless of the display in the
multimedia system display.
In urban traffic and stop-start traffic, drive pro-
gram C is recommended.
Available drive programs:
C Comfort Comfortable and economi-
cal driving characteristics
S Sport Sport yd riving characteris-
tics
S+ Sport Plus Particularly sport yd riving
characteristics
I Individual Individual settings
E Economy Particularly economical
driving characteristics
Additional information for drive programs
( Y
page 125).
Automatic transmission
Important safet yn otes
G WARNING
If the engin es peed is above the idling speed
and you engage transmission position D or R ,
the vehicle could pull away suddenly. There is
ar isk of an accident.
When engaging transmission position D or R ,
always firmly depress the brake pedal and do
not simultaneously accelerate.
G WARNING
The automatic transmission switches to neu-
tral position N when you switch off the engine.
The vehicle may roll away. There is ar isk of an
accident.
After switching off the engine, always switch
to parkin gp osition P .P reven tt he parked vehi-
cle from rolling away by applying the parking
brake. Selector lever
Overview of transmission positions
! If the engin es peed is too high or the vehicle
is in motion ,don ot shift the automatic trans-
mission directly from [ to ^ ,f rom ^ to [
or directly to ] .
Do not open the driver' sd oor while the vehi-
cle is in motion .Atl ow speeds in transmission
position [ or ^ ,o therwise park position ]
is engaged automatically.
The transmission could be damaged.
]
Park position ^
Reverse gear \\
Neutral [
Drive
The selector lever always return stoi ts original
position .T he curren tt ransmission position ] ,
^ , \\ or [ is shown in the transmission posi-
tion display in the multifunction display.
Transmission position and drive pro-
gram display
All vehicles (except for Mercedes-AMG
SLC 43)
C
Transmission position
D
Gear

The current transmission position and drive pro-
gram appear in the multifunction display.
Mercedes-AMG SLC 43
C
Transmission positionD
Drive program
The current transmission position and drive pro-
gram appear in the multifunction display.
Engaging par kp osition P
X
When the vehicle is stationary, depress the
brake pedal. X
Press button C .
Engaging par kp osition Pa utomaticallyPark position ] is automatically engaged if:R
you switch off the engine using the SmartKey
and remove the SmartKey R
you switch off the engine using the SmartKey
or using the Start/Stop button and open the
driver's door or front-passenger door R
you open the driver's door when the vehicle is
stationary or when driving at av ery low speed
and the transmission is in position [ or ^
Under certain conditions, the automatic trans-
mission shifts automatically to transmission
position ] if the HOLD function or Distance
Pilot DISTRONIC is activated. Observe the infor-
mation on the HOLD function ( Y
page 148) and
on Distance Pilot DISTRONIC ( Y
page 144). Engaging reverse gear R
! Only move the automatic transmission to
^ when the vehicle is stationary. X
Depress the brake and keep it pressed. X
Push the selector lever forwards past the first
point of resistance.
The ECO start/sto pf unction is not available
when reverse gear is engaged. Further informa-
tion on the ECO start/sto pf unction
( Y
page 119).
Shifting to neutral N
G WARNING
If children are left unsupervised in the vehicle,
they could: R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they: R
release the parking brake R
shift the automatic transmission out of park
position P R
start the engine
There is ar isk of an accident and injury.
Never leave children or animals unattended in
the vehicle.
When leaving the vehicle, alway st ake the
SmartKey with you and lock the vehicle. This
also applies to mobile phones if the "Digital
Car Key in smartphone" function is activated
via the Mercedes me connect web app. X
When the vehicle is stationary, depress the
brake pedal. X
Push the selector lever forwards or back to
the first point of resistance.
If you switch the engine off with the transmis-
sion in position ^ or [ ,t he automatic trans-
mission shifts to \\ automatically.
With the SmartKey: if you then open the driv-
er's door or the front-passenger door or remove
the SmartKey from the ignition, the automatic
transmission shifts to ] automatically.
With KEYLESS-GO: if you then open the driver's
or front-passenger door, the automatic trans-
mission shifts to ] automatically.Automatic transmission 123
Driving and parking Z

matic transmission protects against engine
damage by not shifting down.
Shift recommendation All vehicles (except for Mercedes-AMG
SLC 43)
The gearshift recommendations assist you in
adopting an economical driving style .T he rec-
ommended gear is shown in the multifunction
display. X
Shift to recommended gear D according to
gearshift recommendation C when shown in
the multifunction display of the instrument
cluster.
Mercedes-AMG SLC 43 The gearshift recommendations assist you in
adopting an economical driving style .T he rec-
ommended gear is shown in the multifunction
display. X
Shift to recommended gear D according to
gearshift recommendation C when shown in
the multifunction display of the instrument
cluster.
Kickdown X
For maximu ma cceleration, depress the
accelerator peda lb eyond the pressure point.
The automatic transmission shifts to al ower
gear depending on the engine speed. X
Shift back up once the desired speed is
reached.
During kickdown, you cannot shift gears using
the steering whee lp addle shifters.
If you apply full throttle, the automatic trans-
mission shifts up to the next gear when the
maximu me ngine speed is reached. This pre-
vents the engine from overrevving.128
Automatic transmission
Driving and parking

! Overfilling the fuel tank could damage the
fuel system.
! Take care not to spill any fuel on painted
surfaces. You could otherwise damage the
paintwork.
! Use af ilter when adding fuel from af uel can.
The fuel lines and/or the fuel injection system
could otherwise be blocked by particles from
the fuel can.
If you overfill the fuel tank, fuel could spray out
when the fuel pump nozzle is removed.
For further information on fuel and fuel quality
( Y
page 291).
Refueling
General information The fuel filler flap is unlocked or locked auto-
matically when you unlock or lock the vehicle
with the SmartKey or using KEYLESS-GO.
The position of the fuel filler cap is displayed

ECO display The ECO display show sy ou how economical
your driving style is. The ECO display assists you
in achievin gt he mos te conomical driving style
for th es electe ds ettings and prevailin gc ondi-
tions .Y our driving style can significantly influ-
enc et he vehicle's consumption.
C
AccelerationD
Coasting

In addition to driving style, the actual consump-
tion is affected by other factors, such as: R
load R
tire pressure R
cold start R
choice of route R
active electrical consumers
These factors are not include dint he ECO dis-
play.
An economical driving style specially requires
driving at moderate engine speeds.
Achieving ah igher valu eint he categories
"Acceleration" and "Constant": R
observe the gearshift recommendations. R
drive the vehicle in drive program C or E .
In urba nt raffic and stop-start traffic, drive pro-
gram C is recommended.
On long journeys at ac onstant speed ,e .g. on the
highway, only the outer area for "constant" will
change.
The ECO display summarizes the driving style
from the start of the journey to its completion.
Therefore, there are more marked changes in
the outer area satt he start of aj ourney. On lon-
ger journeys, there are fewer changes. For more
marked changes, perform am anua lr est
( Y
page 167).
Further information on the ECO display
( Y
page 166).
Braking
Important safety notes
G WARNING
If you shift down on as lippery road surface in
an attempt to increase the engine's braking
effect, the drive wheel sc ould lose their grip.
There is an increased danger of skidding and
accidents.
Do not shift down for additional engine brak-
ing on as lippery road surface.
Downhill gradients
! On long, steep gradients, you must reduce
the load on the brakes. To use engine braking,
shift to al owe rg ear in good time. This helps you to avoid overheating the brakes and wear-
ing them out excessively.
When making use of the engine braking
effect, it is possible that ad rive wheel may not
turn for some time, e.g. in the case of sud-
denly changing or slippery road surface con-
ditions. This could cause damage to the drive
train. This type of damage is not covered by
the Mercedes-Benz warranty.
Change into al owe rg ear in good time on long
and steep downhill gradients. This is especially
important if the vehicle is laden.
This also applies if you have activated cruise
control or Distance Pilo tD ISTRONIC.
Heavy and light loads
G WARNING
If you rest you rf oot on the brake peda lw hile
driving, the braking system can overheat. This
increases the stopping distance and can even
cause the braking system to fail .T here is a
risk of an accident.
Never use the brake peda lasaf ootrest. Never
depres st he brake peda la nd the accelerator
peda latt he same time.
! Depressing the brake peda lc onstantly
results in excessive and premature wea rt o
the brake pads.
If the brakes have been subjected to ah eavy
load ,don ot stop the vehicle immediately ,b ut
drive on for as hort while. This allows the airflow
to cool the brakes more quickly.
Wet roads If you have driven for al ong time in heavy rain
withou tb raking, there may be ad elayed reac-
tion from the brakes when braking for the first
time. This may also occur after the vehicle has
been washed or driven through deep water.
You then have to depres st he brake peda lm ore
firmly .M aintai nag reater distance from the
vehicle in front.
After driving on aw et road or having the vehicle
washed, brake firmly whil ep aying attention to
the traffic conditions. This wil lw arm up the
brake discs, thereby drying them more quickly
and protecting them against corrosion.136
Driving tips
Driving and parking

Limited braking performance on salt-
treated roads If you driv eons alted roads ,al ayer of salt resi-
due may for mont he brak ed isc sa nd brake
pads. This can result in as ignificantly longer
braking distance. R
In orde rtop revent any salt build-up, apply the
brakes occasionally while paying attention to
th et ra ffic conditions.R
Carefully depress th eb rak ep edal and the
beginnin ga nd end of aj ou rney.R
Maintain ag reater distanc etot he vehicle
ahead.
Servicing th eb rakes
! The brak ef luid level may be to ol ow, if:R
if th er ed brak ew arning lamp light supi n
th ei nstrumen tc luster andR
you hear aw arning tone while th ee ngine is
running
Observe additional warning messages in the
multifunction display.
The brak ef luid level may be to ol ow due to
brak ep ad wear or leaking brak el ines.
Hav et he brak es ystem checked immediately.
Consult aq ualifie ds pecialist workshop to
arrange this.
! As th eE SP ®
system operates automatically,
th ee ngine and th ei gnitio nm ust be switched
off (th eS ma rtKey must be in position

Display when Distanc eP ilot DISTRONIC is
activate d
C
Vehicl einf ront ,ifd etecte dD
Specified minimum distanc etot he vehicl e
in front; adjustable

HOLD function
General notes The HOLD function can assist the drive rint he
following situations: R
when pulling away, especially on steep slopes R
when maneuvering on steep slopes R
when waiting in traffic
The vehicl eisk ept stationary without the driver
having to depress the brake pedal.
The braking effect is cancele da nd the HOLD
function deactivated when you depress the
accelerator peda ltop ul la way.
Important safety notes
G WARNING
When leaving the vehicle, it can still roll away
despite being braked by the HOLD function if: R
there is am alfunction in the system or in
the voltag es upply.R
the HOLD function has been deactivated by
pressing the accelerator peda lort he brake
pedal, e.g. by av ehicl eo ccupant.R
the electrical system in the engine com-
partment, the battery or the fuse sh ave
been tampere dw ith.R
the battery is disconnected
There is ar isk of an accident.
If you wis htoe xit the vehicle, alway st urn off
the HOLD function and secure the vehicle
against rolling away.
! When Distance Pilot DISTRONIC or the
HOLD function is activated, the vehicle
brakes automatically in certain situations.
To avoi dd amage to the vehicle, deactivate
Distance Pilot DISTRONIC and the HOLD
function in the following or similar situations: R
when towing the vehicle R
in the car wash
Deactivating the HOLD function ( Y
pag e1 48). Activation conditions You can activate the HOLD function if all of the
following conditions are fulfilled: R
the vehicl eiss tationary. R
the engine is running or if it has been auto-
matically switched off by the ECO start/stop
function. R
the driver's door is closed or you rs eat bel ti s
fastened. R
the electric parking brake is released. R
the transmission is in position [ , ^ or \\ .R
Distance Pilot DISTRONIC is deactivated
Activating the HOLD function X
Make sure that the activation conditions are
met. X
Depress the brake pedal. X
Quickly depress the brake peda lf urther
until C appears in the multifunction display.
The HOLD function is activated. You can
release the brake pedal.
i If depressing the brake peda lt he first time
does not activate the HOLD function, wait
briefly and then try again.
Deactivatin gt he HOLD functionThe HOLD function is deactivated automatically
if: R
you depress the accelerator and the trans-
mission is in position [ or ^ .R
you shift the transmission to position ] .R
you apply the brakes again with ac ertain
amount of pressure until HOLD disappears
from the multifunction display. R
you secure the vehicl eu sing the electric park-
ing brake. R
you activate Distance Pilot DISTRONIC.
i After at ime, the electric parking brake
secure st he vehicl ea nd relieves the service
brake.148
Driving systems
Driving and parking