sensor MERCEDES-BENZ SL CLASS 2018 Owner's Manual

Display messages
Possible causes/consequences and P Solutions
Tir e Press. Monito r
Currently Unavaila‐
ble Becaus et he re is interferenc ef ro mas tr on gs ource of radi ow aves, no
signals from th et ir ep ressur es ensor sa re detected. The tire pressur e
monitor is temporarily malfunctioning .X
Drive on .
The tire pressur em onitor restarts automatically as soo nast he
problem has been resolved.
TirePress .S en ‐
sor(s) Missin g There is no signal from th et ir ep ressur es ensor of on eors everal
wheels. The pressur eoft he affecte dt ir ed oes no ta ppear in th em ul-
tifunction display. X
Hav et he fault yt ir ep ressur es ensor replace dataq ualified special -
ist workshop .
Tir eP ressure Moni‐
tor Inoperative No
Wheel Sensor s The wheels mounte ddon ot hav eas uitable tire pressur es ensor .T he
tire pressur em onitor is deactivated.X
Moun tw heels wit hs uitable tire pressur es ensors.
The tire pressur em onitor is activated automatically after drivin gf or
af ew minutes.
Tir e Press. Monito r
Inoperative The tire pressur em onitor is faulty.X
Visit aq ualified specialist workshop .
Vehicle Display messages
Possible causes/consequences and P Solutions
Shift to 'P' or 'N'
to Start Engine You hav ea ttempte dtos ta rt th ee ng in ew it ht he transmission in posi-
tion ^ or [ .X
Shift th et ra nsmission to position ] or \\ .
Apply Brake to
Shift fro m' P' You hav ea ttempte dtos hift th et ra nsmission to position [ , ^ or \\
without depressing th eb rak ep edal .X
Depress th eb rak ep edal .
To Shift out of P
or N, Depres s Brake
and Switch on Engine You hav ea ttempte dtos hift th et ra nsmission out of position ] or \\
int oa nother transmission position wit ht he engin es witched off .X
Depress th eb rak ep edal .X
Start th ee ng ine.
Driver's Doo rO pe n
&T ransmission Not
in PR is kofV ehi‐
cle Rollin gA wa y The driver's door is no tf ully closed and th et ra nsmission is in position
^ , \\ or [ .
Aw arning tone also sounds.
G WARNIN G
The vehicl em ay rol la way.
There is ar is kofana ccident.X
Whe np arking th ev ehicle, shift th et ra nsmission to position ] .198
Display messages
On-boar dc omputer an dd isplays

Alway ss wi tch off the windshield wipers and
the ignition before cleaning the windshield.
! Do not pull the wipe rb lade .O therwise, the
wipe rb lade could be damaged.
! Do not clean wipe rb lade st oo ofte na nd do
not ru bt hem too hard. Otherwise, the graph-
ite coating could be damaged .T hi sc ould
cause wipe rn oise.
! Hol dt he wipe ra rm securel yw he nf olding
back. The windshield could be damaged if the
wipe ra rm smacks against it suddenly.X
Fol dt he windshield wipe ra rm sa wa yf rom the
windshield. X
Carefully clean the wipe rb lade sw it had am p
cloth. X
Fol dt he windshield wipe ra rm sb ac ka gain
before switching on the ignition.
Cleanin gt he exterior lighting
! Onl yu se cleaning agents or cleaning cloths
which ar es ui tabl ef or plastic light lenses.
Unsuitabl ec leaning agents or cleaning cloths
could scratch or damage the plastic light len-
ses. X
Clea nt he plastic lenses of the exterio rl ig hts
with aw et sponge and am il dc leaning agent,
e.g .M ercedes-Benz car shampo oorc leaning
cloths.
Cleanin gt he mirro rt urn signals
! Onl yu se cleaning agents or cleaning cloths
tha ta re suitabl ef or plastic lenses .U nsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lenses of the
mirror turn signals. X
Clea nt he plastic lenses of the mirror turn sig-
nal sint he exterio rm irror housing using aw et
sponge and mil dc leaning agent, e.g.
Mercedes-Benz car shampo oorw it hc leaning
cloths.
Cleanin gt he sensors
! If yo uc lean the sensors with ap ower
washer, make sure tha ty ou kee pad is tance
of at leas t1 1.8 in (30 cm )b et ween the vehicle
and the powe rw as he rn ozzle. Information abou tt he correct distance is availabl ef rom
the equipment manufacturer.
X
Clea ns ensors C of the driving system sw it h
water, car shampo oa nd as of tc loth.
Cleanin gt he rear view camera
! Do not clean the camera lens and the area
around the rea rv ie wc amera with ap ower
washer.
X
Ope nt he camera fla p( Y
page 155).X
Use clean water and as of tc loth to clean
camera lens C .
The camera fla pc loses: R
if the ignition is switched off R
if the camera system is deactivated R
starting at vehicl es peed sa bo ve 6.2 mph
(10 km/h)242
Care
Maintenance and care

Important safety notes The tire pressur ew arning system does no tw arn
you of an incorrectl ys et tire pressure. Observ e
th en otes on th er ecommended tire pressur e
( Y
page 263).
The tire pressur el oss warning does no tr eplace
th en ee dtor egularly chec kt he tire pressure. An
eve nl oss of pressur eons everal tires at th e
sam et im ec anno tbed etecte dbyt he tire pres-
sur el oss warning system.
The tire pressur em onitor is no ta ble to warn you
of as udde nl oss of pressure, e.g. if th et ir ei s
penetrated by af oreign object. In th ee vent of a
sudde nl oss of pressure, brin gt he vehicl etoa
halt by braking carefully. Avoid abrup ts te ering
movements.
The function of th et ir ep ressur el oss warning
system is limite dord elaye di f:R
snow chain sa re mounte dony our vehicle's
tires .R
road condition sa re wintry.R
you are driving on san dorg ravel.R
you adopt av er ys port yd riving style (corner-
ing at high speeds or driving wit hh igh rates of
acceleration). R
you driv ew it hah eav yl oad.
Restarting th et ir ep re ssure loss warn-
ing system Restart th et ir ep ressur el oss warning system if
you have :R
changed th et ir ep ressur eR
changed th ew heels or tiresR
mounte dn ew wheels or tiresX
Before restarting ,m ak es ur et ha tt he tire
pressures are set properly on all four tires for
th er espective operating conditions.
The recommended tire pressur ec an be foun d
on th eT ir ea nd Loading Information placard
on th eB -p illar .A dd itionally, at ir ep ressur e
table is attached to th ef uel filler flap .T he tire
pressur el oss warning system can only giv e
reliable warning sify ou have set th ec orrect
tire pressure. If an incorrec tt ir ep ressur ei s
set ,t he se incorrec tv alue sw ill be monitored.X
Als oo bserv et he note sint he section on tire
pressures ( Y
page 263).X
Mak es ur et ha tt he SmartKey is in position H
in th ei gnition loc k( Y
page 116). X
Press th e Y or e butto nont he steering
whee lt os elect th e Serv. menu.X
Press th e c or d butto ntos elect
Tir eP ressure . X
Press th e v button.
The Run Fla tI ndicator Active Press
'OK 'toR estar t message appear sint he
multifunction display.
If you wish to confirm th er estart :X
Press th e v button.
The Tir eP ressure Now OK? message
appear sint he multifunction display. X
Press th e c or d butto ntos elect Yes .X
Press th e v button.
The Run Fla tI ndicator Restarted mes -
sage appear sint he multifunction display.
Afte rat ea ch-in period, th et ir ep ressur el oss
warning system will monitor th es et tire pres-
sures of all four tires .
If you wish to cancel th er estart :X
Press th e 8 button.
or X
If th e Tir eP ressure Now OK? message
appears, use th e c or d butto nt o
select Cancel . X
Press th e v button.
The tire pressur ev alue ss to re datt he last
restar tw ill continue to be monitored.
Tire pressure monitor
General notes If at ir ep ressur em onitor is installed, th ev ehi-
cle's wheels hav es ensor st ha tm onitor th et ir e
pressures in all four tires .T he tire pressur em on -
itor warn sy ou if th ep ressur ed rops in on eo r
mor eoft he tires .T he tire pressur em onitor only
function sift he corresponding sensor sa re
installed in all wheels.
Information on tire pressures is displayed in th e
multifunction display. Afte raf ew minute so f
driving ,t he curren tt ir ep ressur eofe ac ht ir ei s
shown in th e Serv. men uoft he multifunction
display. Tire pressure 267
Wheels and tires Z

The tire pressure monitor has ay ellow warning
lamp in the instrument cluster for indicating
pressure loss or am alfunction. Whether the
warning lamp flashes or lights up indicates
whether at ire pressure is too low or the tire
pressure monitor is malfunctioning: R
if the warning lamp is lit continuously, the tire
pressure on one or more tires is significantly
too low. The tire pressure monitor is not mal-
functioning. R
if the warning lamp flashes for approximately
am inute and then remains lit constantly, the
tire pressure monitor is malfunctioning.
In addition to the warning lamp, am essage
appears in the multifunction display .O bserve
the information on display messages
( Y
page 196).
It may take up to ten minutes for am alfunction
of the tire pressure monitor to be indicated. A
malfunction will be indicated by the tire pres-
sure warning lamp flashing for approximately
one minute and then remaining lit. When the
malfunction has been rectified, the tire pressure
warning lamp goes out after af ew minutes of
driving.
The tire pressure values indicated by the on-
board computer may differ from those meas-
ured at ag as station with ap ressure gage. The
tire pressures shown by the on-board computer
refer to those measured at sea level. At high
altitudes, the tire pressure values indicated by a
pressure gage are higher than those shown by
the on-board computer. In this case, do not
reduce the tire pressures.
The operation of the tire pressure monitor can
be affected by interferenc ef rom radio transmit-
ting equipment (e.g. radio headphones, two-way
radios) that may be being operated in or near the
vehicle.
Checking the tire pressur ee lectroni-
cally X
Make sure that the SmartKey is in position H
( Y
page 116) in the ignition lock. X
Press the Y or e button on the steering
wheel to select the Serv. menu.X
Press the c or d button to select
Tire Pressure .X
Press v .
The current tire pressure of each tire is shown
in the multifunction display. If the vehicle has been parked for over
20 minutes, the Tire pressure will be
displayed after driving af ew minutes
message appears.
After at each-in process, the tire pressure mon-
itor automatically detect sn ew wheels or new
sensors. As long as ac lear allocation of the tire
pressure value to the individual wheels is not
possible, the Tire Pressure Monitor Active
display message is shown instead of the tire
pressure display .T he tire pressures are already
being monitored.
If an emergenc ys pare wheel is mounted, the
system may continue to show the tire pressure
of the wheel that has been removed for af ew
minutes. Be aware that the value displayed for
the position where the emergenc ys pare wheel
is fitted is not the same as the current tire pres-
sure of the emergenc ys pare wheel.
Tire pressur em onitor warning mes-
sages The tire pressure monitor detect sap ressure
loss in one or more tires: R
If the tire pressure monitor detect sap ressure
loss in one or more tires, aw arning message
is shown in the multifunction display .T he yel-
low tire pressure warning lamp then lights up. R
If the Please Correct Tire Pressure
message appears in the multifunction display,
the tire pressure in at least one tire is too low.
The tire pressure must be corrected when the
opportunit ya rises. R
If the Check Tires message appears in the
multifunction display ,t he tire pressure in at
least one tire has dropped significantly. The
tires must be checked. R
If the Warning Tire Malfunction message
appears in the multifunction display ,t he tire
pressure in at least one tire has dropped sud-
denly. The tires must be checked.
Observe the instructions and safety notes in the
display messages in the "Tires" section
( Y
page 196).
If the wheel positions on the vehicle are rotated,
the tire pressures may be displayed for the
wrong positions for as hort time. This is rectified
after af ew minutes of driving, and the tire pres-
sures are displayed for the correc tp ositions.Tir ep re ssure 269
Wheels and tires Z

Information regardin gt echnica ld at a
i The dat as ta te dh er es pecifically refers to a
vehicl ew it hs ta ndard equipment. Consult an
authorize dM ercedes-Ben zC ente rf or th e
dat af or all vehicl ev ariants and trim levels.
Vehicle electronics
Tampering with th ee ngin ee lectron-
ics
! Only hav ew or kc arried out on th ee ng in e
electronics and it sa ssociated parts, suc ha s
control units, sensors, actuating component s
and connecto rl eads ,ataq ualified specialist
workshop. Vehicl ec om ponent sm ay other -
wise wear mor eq uickly and th ev ehicle's
operating permit may be invalidated.
Installing two-way radio sa nd mobile
phones (RF transmitters)
G WARNIN G
The electromagneti cr adiation from two-way
radios can interfere wit ht he vehicl ee lectron -
ics if two-way radios are manipulated or ret -
rofitte di ncorrectly. This could jeopardiz et he
operating safet yoft he vehicle. Ther eisar is k
of an accident.
You should hav ea ll wor kone lectrical and
electronic component sc arried out at aq uali-
fie ds pecialist workshop.
G WARNIN G
If you incorrectl yo perate two-way radios in
th ev ehicle, th ee lectromagneti cr adiation
may interfere wit ht he vehicl ee lectronics ,f or
exampl ei f:R
th et wo-way radi oisn ot connecte dtoa n
exterio ra ntennaR
th ee xter io ra ntenna is no tc orrectly moun -
te dorisn ot low-reflection
This could jeopardiz et he operating safet yo f
th ev ehicle. Ther eisar is kofana ccident. Hav et he low-reflection exterio ra ntenna
installed at aq ualified specialist workshop.
Always connec tt wo-way radios to th el ow-
reflection exterio ra ntenna when operating in
th ev ehicle.
! The operating permit may be invalidated if
th ei nstruction sf or installation and use of
two-way radios are no to bserved.
In particular, th ef ollowin gc onditi on sm ust be
complied with: R
only approve dw avebands may be used R
observ et he maximum permissible output
in these wavebands R
only approve da ntenna position sm ay be
used
Excessiv el evels of electromagneti cr adiation
may caus ed amag etoy our healt ha nd th eh ealt h
of others. Using an exterio ra ntenna takes int o
accoun tc urren ts ci entific discussion sr elating
to th ep ossible healt hh azards that may result
from electromagneti cf ields.
The followin ga ntenna position sm ay be used if
RF transmitters hav eb een properly installed:
Approved antenna position s
C
Rear fender
i On th er ear fenders, it is recommended to
position th ea ntenna on th es ide of th ev ehicl e
closes ttot he center of th er oad .
Use th eT echnical Specification ISO/TS 2160 9
when retrofitting RF transmitters (Road Vehicles
-E MC guidelines for installation of aftermarket
radi of re quency transmitting equipment) .
Observ et he legal requirements for accessory
parts.
If your vehicl eh as installation sf or two-way radi o
equipment, use th ep ower suppl yora ntenna
connection si ntended for use wit ht he basic wir-288
Vehicle electronics
Technical data

The antifreeze/corrosion inhibitor concentra-
tion in the engine cooling system should: R
be at least 50%. This will protec tt he engine
cooling system against freezin gd own to
approximately -35 ‡( -37 †).R
not exceed 55% (antifreez ep rotection down
to -49 ‡[ -45 †]). Otherwise, heat will not be
dissipated as effectively
If the vehicle has lost coolant, add equal
amounts of water and antifreeze/corrosion
inhibitor.
Mercedes-Benz recommends an antifreeze/
corrosion inhibitor concentrate in accordance
with MB Specifications for Servic eP roducts
310.1.
i When the vehicle is first delivered, it is filled
with ac oolant mixture that ensures adequate
antifreeze and anti-corrosion protection.
i The coolant is checked with every mainte-
nanc ei nterval at aq ualified specialist work-
shop.
Fillin gc apacitiesMissing values were not availabl eatt ime of
going to print.
Model Capacity
SLC 300
Approx .8 .5 US qt
(8.0 l)
Mercedes ‑ Benz
SLC 43 AMG Approx .8 .2 US qt
(7.8 l)
Windshield washer system
Important safety notes
G WARNING
Windshield washer concentrate could ignite if
it comes into contact with hot engine compo-
nent sort he exhaust system. There is ar isk of
fire and injury.
Make sure that no windshield washer con-
centrate is spilled next to the filler neck.
! Only use washer fluid that is suitable for
plastic lamp lenses, e.g. MB SummerFit or MB
WinterFit. Unsuitable washer fluid could dam-
age the plastic lenses of the headlamps. ! Only MB SummerFit and MB WinterFit
washer fluid should be mixed together. The
spray nozzles may otherwise become
blocked.
Do not use distilled or de-ionised water. Other-
wise, the level sensor may give af alse reading.
When handling washer fluid, observe the impor-
tant safety notes on service products
( Y
page 290).
At temperatures above freezing: X
Fill the washer fluid reservoir with am ixture of
water and windshield washer fluid, e.g. MB
SummerFit. X
Add 1p art MB SummerFit to 100 parts water.
At temperatures below freezing: X
Fill the washer fluid reservoir with am ixture of
water and washer fluid, e.g. MB WinterFit.
For the correc tm ixing ratio refer to the infor-
mation on the antifreeze reservoir.
i Add windshield washer fluid, e.g. MB Sum-
merFit or MB WinterFit, to the washer fluid all
year round.
Climate control system refrigerant
Important safety notes The climate control system of your vehicle is fil-
led with refrigerant R ‑ 134a.
The instruction label regarding the refrigerant
type used can be found on the radiator cross
member.
! Only the refrigerant R ‑ 134a and the PAG oil
approved by Mercedes-Benz may be used.
The approved PAG oil may not be mixed with
any other PAG oil that is not approved for
R-134a refrigerant .O therwise, the climate
control system may be damaged.
Servic ew ork, such as refilling with refrigerant or
replacing component parts, may only be carried
out by aq ualified specialist workshop. All appli-
cable regulations, as well as SAE standard J639,
must be adhered to.
Always have work on the climate control system
carried out at aq ualified specialist workshop.294
Service products and filling capacities
Technical data