seat memory MERCEDES-BENZ SL500 2003 R230 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2003, Model line: SL500, Model: MERCEDES-BENZ SL500 2003 R230Pages: 376, PDF Size: 6.35 MB
Page 4 of 376
ContentsControls in detail............................... 79
Locking and unlocking ......................... 80
Keys ............................................... 80
KEYLESS-GO card*......................... 84
Opening the doors from the inside . 89
Opening the trunk from the inside.. 89
Trunk lid emergency release .......... 90
Closing the trunk lid ....................... 91
Automatic central locking .............. 91
Locking and unlocking
from the inside ............................... 92
Seats.................................................... 93
Lumbar support .............................. 93
Multicontour backrest* .................. 93
Moving the seats forward and
backward........................................ 95
Seat ventilation* ............................ 96
Seat heater..................................... 97
Memory function.................................. 99
Storing positions into memory ..... 100
Recalling positions from memory . 100
Storing parking position ............... 100
Lighting .............................................. 102
Exterior lamp switch ..................... 102
Combination switch...................... 104Hazard warning flasher ................ 105
Interior lighting............................. 106
Courtesy lighting .......................... 107
Instrument cluster ............................. 108
Instrument cluster illumination .... 108
Coolant temperature gauge ......... 108
Trip odometer .............................. 109
Tachometer .................................. 109
Outside temperature indicator ..... 109
Control system .................................. 110
Multifunction display .................... 110
Multifunction steering wheel ........ 111
Menus .......................................... 113
Standard display menu ................ 115
AUDIO menu ................................ 115
NAVI menu ................................... 117
Distronic* menu........................... 117
Malfunction memory menu .......... 118
Settings menu .............................. 119
Trip computer menu ..................... 131
TEL menu* ................................... 133
Automatic transmission ..................... 137
One-touch gearshifting................. 138
Gear ranges.................................. 139
Gear selector lever position ......... 140
Program mode selector switch..... 141Accelerator position ..................... 142
Steering wheel gearshift control
(Speedshift) and manual shift program
SL 55 AMG................................... 142
Emergency operation (Limp Home
Mode) .......................................... 144
Good visibility .................................... 145
Rear view mirror .......................... 145
Headlamp cleaning system .......... 146
Rear window defroster ................. 146
Sun visors .................................... 146
Automatic climate control ................. 147
Setting the temperature............... 149
Adjusting air volume .................... 150
Adjusting air distribution .............. 151
Maximum cooling MAXCOOL ....... 151
Defrosting .................................... 151
Air recirculation mode.................. 152
Rear window defroster ................. 153
Residual heat and ventilation ....... 154
Deactivating the automatic climate
control system ............................. 154
Air conditioning ............................ 155
Ventilated storage compartments 156
Power windows.................................. 157
Opening and closing the windows 157
Page 26 of 376
26 At a glanceDoor control panel
Door control panel
Item
Page
1
Door handle
89
2
Switches for open-
ing/closing front and rear
side windows
157
3
Memory function (for stor-
ing seat, mirror and steer-
ing wheel settings)
99
4
Seat heater
97
Seat ventilation*
96
5
Seat adjustment
32, 93
6
Remote trunk lid release
switch
90
7
Door pocket
192
Page 34 of 376
34 Getting startedAdjustingHead restraint tilt
Manually adjust the angle of the head
restraint. Push or pull on the lower
edge of the head restraint cushion.
More information can be found in the
“Controls in detail” section (
page 93).
Steering wheelThe stalk is located on the steering column
(lower left).
Make sure that the ignition is switched
on.
All the lights in the instrument cluster
light up.
1Steering column, lengthen or shorten
2Steering column, height
Steering column, lengthen or shorten
Move stalk forward or back in the direc-
tion of arrow1 until a comfortable
steering wheel position is reached with
your arms slightly bent at the elbow.
iThe memory function (
page 99) lets
you store the steering wheel adjust-
ment together with the adjustment for
the seat and the exterior rear view mir-
rors.
Warning!
G
Do not adjust the steering wheel while driv-
ing. Adjusting the steering wheel while driv-
ing could cause the driver to lose control of
the vehicle.
When leaving the vehicle, always remove the
key from the starter switch, and take the
KEYLESS-GO
* card (if so equipped) with
you.
The steering wheel adjustment feature can
also be operated with the driver’s door
open. Do not leave children unattended in
the vehicle, or with access to an unlocked
vehicle. Unsupervised use of vehicle equip-
ment may cause an accident and/or serious
personal injury.
Page 35 of 376
35 Getting started
Adjusting
Steering column, height
Move the stalk up or down in the direc-
tion of arrow2. Make sure that your
legs can move freely and that all the
displays (including malfunction and in-
dicator lamps) on the instrument clus-
ter are clearly visible.
Mirrors
Adjust the inside and exterior rear view
mirrors before driving so that you have a
good view of the road and traffic condi-
tions.
Inside rear view mirror
Manually adjust the inside rear view
mirror.Exterior rear view mirror
The buttons are located on the lower part
of the center console.
1Driver’s side mirror
2Passenger side mirror
3Adjustment button
iThe memory function (
page 99) lets
you store the steering wheel adjust-
ment together with the adjustment for
the seat and the exterior rear view mir-
rors.
Page 36 of 376
36 Getting startedAdjusting
Make sure that the ignition is switched
on.
All the lights in the instrument cluster
light up.
Press button1 for the left mirror or
button2 for the right mirror.
Push adjustment button3 up, down,
left or right according to the setting de-
sired.More information can be found in the
“Controls in detail” section (
page 145).
Warning!
G
Exercise care when using the passenger
side exterior rear view mirror. The mirror
surface is convex (outwardly curved surface
for a wider field of view). Objects in mirror
are closer than they appear. Check your in-
side rear view mirror or glance over your
shoulder before changing lanes. Warning!
G
In case of an accident, liquid electrolyte may
escape the mirror housing if the mirror glass
breaks.
Electrolyte has an irritating effect. Do not al-
low the liquid to come into contact with
eyes, skin, clothing, or respiratory system.
In case it does, immediately flush the affect-
ed area with water, and seek medical help if
necessary.
!Electrolyte drops coming into contact
with the vehicle paint finish can only be
completely removed while in their liq-
uid state and by applying plenty of wa-
ter.iThe memory function (
page 99) lets
you store the steering wheel adjust-
ment together with the adjustment for
the seat and the exterior rear view mir-
rors.
!If an exterior rear view mirror housing
is forcibly pushed forward or rearward,
reposition it by applying firm pressure
until it snaps into place. The mirror
housing is now properly positioned and
you can adjust the mirror normally.
Page 79 of 376
79 Controls in detail
Locking and unlocking
Seats
Memory function
Lighting
Instrument cluster
Control system
Automatic transmission
Good visibility
Automatic climate control
Power windows
Retractable hardtop
Driving systems
Useful features
Page 99 of 376
99 Controls in detail
Memory function
Memory function
With the memory switch you can store up
to three different settings per key and KEY-
LESS-GO* card.
The following settings are saved for each
stored position:
Driver’s seat and backrest position
Steering wheel position
Inside rear view mirror position
Driver’s side exterior rear view mirror
position
Passenger side exterior rear view mir-
ror position
These key dependent memory settings can
be deactivated if desired (
page 130).The memory switch is located on the door.
MMemory button
1, 2, 3Stored positions
Be sure that the ignition is switched on
or one door is open.
All the lamps in the instrument cluster
light up when the ignition is switched
on.
!Prior to operating the vehicle, the driv-
er should check and adjust the seat
height, seat position fore and aft, and
seat backrest angle if necessary, to en-
sure adequate control, reach and com-
fort. The head restraint should also be
adjusted for proper height. Also see air-
bag section (
page 53) for proper seat
positioning.
In addition, adjust the steering wheel to
ensure adequate control, reach, opera-
tion and comfort. Both the inside and
outside rear view mirrors should be ad-
justed for adequate rear vision.
Fasten seat belts. Infants and small
children should be seated in a properly
secured restraint system that complies
with U.S. Federal Motor Vehicle Safety
Standard 213 and Canadian Motor Ve-
hicle Safety Standard 213.
Warning!
G
Do not activate the memory function while
driving. Activating the memory function
while driving could cause the driver to lose
control of the vehicle.
Page 100 of 376
100 Controls in detailMemory functionStoring positions into memory
Adjust the seats, steering wheel and
rear view mirrors to the desired posi-
tion (
page 32).
Press memory buttonM.
Release memory button and press a
stored position button1, 2, or3 within
three seconds.
All the settings are stored at the select-
ed position.
Recalling positions from memory
On memory switch, press and hold
stored position button1, 2 or3 until
the seat, steering wheel and rear view
mirrors have fully moved to the stored
positions.
Storing parking position
For easier parking you can adjust the pas-
senger exterior rear view mirror so that you
can see the right rear wheel as soon as you
engage reverse gearR.
The exterior rear view mirror returns to its
stored driving position:
10 seconds after you put the gear se-
lector lever in positionD
immediately once you exceed a speed
of approx. 6 mph (10 km/h)
immediately when you press the button
for driver’s side mirror
iReleasing the button immediately
stops movement to the stored posi-
tions.
iThe mirror parking position feature
(page 131) must be activated and the
passenger side exterior rear view mirror
(page 35) must be selected at the
time in order for the system to recall the
stored mirror position when reverse
gearR is engaged.
Page 130 of 376
130 Controls in detailControl systemAfter entering the vehicle, the steering
wheel and seat will move into the position
stored in memory when
the driver’s door is closed
you put the key in the starter switch
and
press the appropriate stored position
button on the memory switch
(page 99)
Move the selection marker with button æ
or
ç
to the
Convenience
sub-
menu.
Press button
j
or
k
repeatedly
until you see this message in the left
display:
Easy-entry feature Acti-
vate
.
The selection marker is on the current
setting.
Press
æ
or
ç
to change the
easy-entry/exit setting.
The following settings are available for
the easy-entry/exit feature:
Off
The easy-entry/exit feature is
deactivated
Steer. column
Only the steering column is
moved
Steer.col.+seat
Both the steering column and
the seat are movedSetting key dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each key (
page 99).
Move the selection marker with button æ
or
ç
to the
Convenience
sub-
menu.
Press button
j
or
k
repeatedly
until you see this message in the left
display:
Key-dependent
.
The selection marker is on the current
setting.
Press
æ
or
ç
to set key depen-
dency to
On or
Off
.
iTo cancel seat/steering wheel move-
ment, press one of the following:
the seat adjustment switch
(page 32)
the steering column switch
(page 34)
the memory switch (
page 99)
Page 353 of 376
353 Technical terms
Gear range
Number of gears which are available to
the automatic transmission for shifting.
The automatic gear shifting process
can be adapted to specific operating
conditions using the selector lever.
GPS
(G
lobal P
ositioning S
ystem)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs CD digital maps for
navigation.
Head-thorax airbag
Installed in the doors, these airbags
protect occupants during side impact
collisions exceeding a preset thresh-
old. Unlike normal side airbags,
head-thorax airbags are also designed
to provide protection for the head area.
Instrument cluster
The displays and indicator/warning
lamps in the driver’s field of vision, in-
cluding the tachometer, speedometer,
engine temperature and fuel gauge.KEYLESS-GO*
System for entering and operating the
vehicle without the use of a key.
Kickdown
Depressing the accelerator past the
point of resistance shifts the transmis-
sion down to the lowest possible gear.
This very quickly accelerates the vehi-
cle and should not be used for normal
acceleration needs.
Voice control system*
Voice control system for car phones,
portable cell phones and audio sys-
tems (radio, CD, etc.).
Lock button
Button on the door which indicates
whether the door is locked or un-
locked. Pushing the lock button down
on an individual door from inside will
lock that door.Memory function
Used to store three individual seat,
steering wheel and mirror positions for
each key and, if so equipped,
KEYLESS-GO* feature.
Menu
The control system displays are ar-
ranged in menus. Each menu contains
a number of commands for particular
systems. In the Audio menu, for exam-
ple, you will find the commands Select
radio station or Operate CD player. Us-
ing commands you can directly change
the settings for your vehicle.
MON
The Motor Octane Number for gasoline
as determined by a standardized
method. It is an indication of a gaso-
line's ability to resist undesired detona-
tion (knocking). The average of both
the MON (Motor Octane Number) and
RON (Research Octane Number) is
posted at the pump, also known as AN-
TI-KNOCK INDEX.