wiper blades MERCEDES-BENZ SL500 2005 R230 Owner's Manual

Contents
Practical hints................................. 323
What to do if … .................................. 324
Lamps in the instrument cluster .. 324
AIRBAG OFF indicator lamp ......... 334
Vehicle status messages in the
multifunction display .................... 335
Where will I find ...? ........................... 372
First aid kit ................................... 372
Vehicle tool kit, jack, and
spare wheel.................................. 372
Locking/unlocking in an emergency . 374
Unlocking the vehicle ................... 374
Locking the vehicle ...................... 376
Lowering the load assist manually 376
Replacing batteries in the
SmartKey/SmartKey with
KEYLESS-GO* .............................. 377
Replacing bulbs ................................. 380
Bulbs ............................................ 380
Replacing bulbs for front lamps ... 383
Replacing bulbs for rear lamps..... 385Replacing wiper blades....................... 386
Removing wiper blades ................. 386
Installing wiper blades .................. 387
Flat tire ............................................... 388
Preparing the vehicle .................... 388
Sealing tires with TIREFIT.............. 388
Mounting the spare wheel ............ 393
Batteries ............................................. 401
Disconnecting the batteries .......... 403
Removing the batteries ................. 404
Charging and reinstalling
batteries ....................................... 404
Reconnecting the batteries ........... 405
Jump starting ...................................... 406
Towing the vehicle .............................. 408
Installing towing eye bolt .............. 411
Fuses .................................................. 412
Main fuse box ............................... 412
Technical data.................................. 415
Parts service ...................................... 416
Warranty coverage ............................. 417
Loss of Service and Warranty
Information Booklet ...................... 417
Identification labels ............................ 418
Layout of poly-V-belt drive.................. 419
SL 500 .......................................... 419
SL 55 AMG ................................... 419
SL 600, SL 65 AMG ...................... 419
Engine ................................................ 420
Rims and tires .................................... 422
Same size tires ............................. 423
Mixed size tires ............................. 425
Spare wheel .................................. 427
Electrical system ................................ 428
Main dimensions ................................ 429
Weights .............................................. 430

53 Getting started
Driving
Windshield wipers
The combination switch is located on the
left of the steering column.Combination switch1Single wipe
2Switching on windshield wipers
Switch on the ignition (
page 36).Switching on windshield wipers

Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
0Windshield wipers off
IIntermittent wiping
IINormal wiper speed
IIIFast wiper speed
Intermittent wiping

Set the combination switch to
positionI.
iThe intermittent wiping interval is de-
pendent on the wetness of the wind-
shield. After the initial wipe, pauses
between wipes are controlled by the
rain sensor.
Wiping will not occur with a door open.
!Do not leave windshield wipers in inter-
mittent setting when vehicle is taken to
an automatic car wash or during wind-
shield cleaning. Wipers will operate in
the presence of water sprayed on the
windshield, and wipers may be dam-
aged as a result.
The combination switch should not be
left in intermittent setting as the wipers
will wipe the windshield once every
time the engine is started. Dust that ac-
cumulates on the windshield might
scratch the glass and/or damage the
wiper blades when wiping occurs on a
dry windshield.iIntermittent wiping is suspended when
the vehicle is at a standstill and a door
is opened.

270 OperationEngine compartmentHood
Opening
1Hood release

Pull lever1 downwards.
The hood is unlocked.
2Lever for opening the hood

Push lever2 on the hood upwards.

Pull up on the hood and then release it.
The hood will be automatically held
open at shoulder height by gas-filled
struts.
Warning!
G
Do not pull the release lever while the vehi-
cle is in motion. Otherwise the hood could
be forced open by passing air flow.
!To avoid damage to the windshield wip-
ers or hood, never open the hood if the
wiper arms are folded forward away
from the windshield.
Warning!
G
To help prevent personal injury, stay clear of
moving parts when the hood is open and the
engine is running. Make sure the hood is
properly closed before driving. When closing
the hood, use extreme caution not to catch
hands or fingers.
The radiator fan may continue to run for ap-
proximately 30 seconds or may even restart
after the engine has been turned off. Stay
clear of fan blades.

318 OperationVehicle careCleaning the Distronic* system sensor
cover
1Distronic* system sensor cover
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water to clean sen-
sor cover1.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the sensor cover. Do
not attempt to wipe dirty sensors with a
dry cloth or sponge.Cleaning the Parktronic system*
sensors
1Parktronic system* sensors in front
bumper

Clean sensors 1 on the bumpers us-
ing a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratchy cloth.
When using a steam cleaner or power
washer, aim nozzle only briefly from a min-
imum distance of 12 in (30 cm) at
sensors1.Wiper blades

Turn on the wipers and place them in a
vertical position.
For information on how to position the wip-
ers in a vertical position, see “Replacing
wiper blades” (
page 386).
!Do not apply strong pressure to the
sensor covers. Applying strong pres-
sure may damage the sensor covers.!To prevent scratches, never apply
strong force and only use a soft,
non-scratchy cloth when cleaning the
sensors. Do not attempt to wipe dirty
sensors with a dry cloth or sponge.!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.

319 Operation
Vehicle care

Clean the wiper blade inserts with a
clean cloth and detergent solution.Window cleaning

Turn on the wipers and place them in a
vertical position.
For information how to position the wipers
in a vertical position, see “Replacing wiper
blades” (
page 386).

Use a window cleaning solution on all
glass surfaces.
An automotive glass cleaner is recom-
mended.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before cleaning the wiper blades.
Otherwise the wiper motor could suddenly
turn on and cause injury. !Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before cleaning the windshield.
Otherwise the wiper motor could suddenly
turn on and cause injury.
!Fold the windshield wiper arm back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.

323 Practical hints
What to do if …
Where will I find ...?
Locking/unlocking in an emergency
Replacing bulbs
Replacing wiper blades
Flat tire
Batteries
Jump starting
Towing the vehicle
Fuses

386 Practical hintsReplacing wiper blades
Removing wiper blades
Turn SmartKey in starter switch to
position1.

Turn combination switch to wiper
settingII (
page 53).

With wiper arms in the vertical position,
turn SmartKey in starter switch to
position0.

Fold the wiper arm forward until it
snaps into place.

Turn wiper blade at a right angle to the
wiper arm.

Slide the wiper blade sideways out of
the retainer.
!To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before replacing a wiper blade.
Otherwise the wiper motor could suddenly
turn on and cause injury.

387 Practical hints
Replacing wiper blades
Installing wiper blades
Slide the wiper blade onto the wiper
arm until it locks in place.

Rotate the wiper blade into a position
parallel to the wiper arm.

Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!Never open the hood when the wiper
arms are folded forward.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make sure the wiper blades are proper-
ly installed. Improperly installed wiper
blades may cause windshield damage.
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

459 Index
Power train 442
Power window
Closing with KEYLESS-GO* 195
Power windows 193
Side windows 193
Synchronizing 195
Problems while driving 55
Production options weight 306
Program mode selector switch 443
Automatic transmission 30, 170
PSI 306
PULSE function (Massage function) 116
Q
Quick search
Phone book* 163
R
Radio
Satellite* 140
Select station 140Radio transmitters
Control and operation 264
Range (distance to empty)
Calling up 161
Reading lamp 31
Rear lamps see Tail lamps
Rear luggage compartment 232
Rear view mirrors see Mirrors
Rear window defroster 178, 189
Recommended inflation pressure 306
Redial memory 163
Refuelling 267
Regular checks 269
Regular driving style 220
Replacing
Backup lamp bulbs 385
Brake lamp bulbs 381
Bulbs 380
Front lamp bulbs 383
Front turn signal bulbs 383
Fuses 412High beam bulbs 383
License plate lamp bulbs 385
Low beam bulbs 383
Rear fog lamp bulb 385
Rear lamp bulbs 381, 385
Rear turn signal bulbs 385
Wiper blades 386
Reset button 25
Resetting
All functions (control system) 145
Fuel consumption statistics 160
Maintenance service indicator
(FSS) 314
Trip odometer 132
Residual heat utilization 190
Restraint systems 62
Airbags 62
Child seat recognition 62
Child seats 62
Emergency Tensioning Device
(ETD) 62, 72
Seat belts 62, 69

467 Index
W
Warning lamps see Lamps, indicator and
warning
Warning sounds
Distance warning function* 216
Distronic* 211
Drivers seat belts 69
Warranty coverage 417
Washing the vehicle 317
Wear pattern (tires) 308
Wheel bolts
Tightening torque 399
Wheel change 393
Tightening torque 399
Wheel wrench 373
Wheels
Tires and wheels 279
Wind screen 202, 444
Installing 202
Removing 203Windows see Side windows
Windshield
Defrosting 187
Refilling washer fluid 278
Washer fluid 54, 278
Washer system 278
Windshield and headlamp washer
system 438
Windshield washer and headlamp cleaning
system 269
Windshield washer fluid 54
Filler neck 278
Messages in display 371
Mixing ratio 438
Refilling 278
Windshield wipers 23, 53
Fast wiper speed 53
Intermittent wiping 53
Replacing wiper blades 386
Wiping with windshield washer
fluid 54Winter driving
Snow chains 310
Tires 309
Winter driving instructions 262
Winter tires 309
Wood trims
Cleaning 321
Wrench, wheel (vehicle tool kit) 373
X
Xenon headlamps 444