garage door opener MERCEDES-BENZ SL550 2008 R230 Owner's Manual

Contents
Power windows .................................. 201
Opening and closing the
windows ....................................... 201
Synchronizing power windows ..... 203
Retractable hardtop ........................... 204
Opening and closing the
retractable hardtop ...................... 204
Driving systems ................................. 214
Cruise control............................... 214
Distronic*..................................... 218
Distance warning function*.......... 229
Active Body Control (ABC) ............ 230
Parktronic system*
(Parking assist)............................. 233
Useful features .................................. 238
Storage compartments................. 238
Cup holders .................................. 243
Ashtray ......................................... 244
Cigarette lighter ........................... 244
Load assist in the trunk ................ 245
Power outlet ................................. 246
Floormat* ..................................... 247
Telephone*................................... 247
Tele Aid ........................................ 250
Garage door opener ..................... 257
Operation......................................... 265
The first 1 000 miles (1 500 km)......... 266
Driving instructions............................ 267
Drive sensibly – save fuel ............. 267
Drinking and driving ..................... 267
Pedals .......................................... 267
Power assistance ......................... 268
Brakes .......................................... 268
Driving off .................................... 270
Parking ......................................... 271
Tires ............................................. 271
Hydroplaning ................................ 272
Tire traction.................................. 273
Tire speed rating .......................... 273
Winter driving instructions ........... 274
Standing water ............................. 275
Passenger compartment .............. 276
Driving abroad.............................. 276
Control and operation of
radio transmitters ........................ 276
Catalytic converter ....................... 277
Emission control .......................... 277
Coolant temperature .................... 278At the gas station .............................. 279
Refueling ...................................... 279
Check regularly and before
a long trip..................................... 280
Engine compartment ......................... 282
Hood ............................................ 282
Engine oil ..................................... 283
Transmission fluid level................ 287
Oil level in the ABC system .......... 287
Coolant ........................................ 288
Windshield washer system and
headlamp cleaning system........... 289
Battery ......................................... 290
Tires and wheels................................ 291
Important guidelines .................... 291
Tire care and maintenance........... 292
Direction of rotation..................... 294
Loading the vehicle ...................... 294
Recommended tire inflation
pressure ....................................... 300
Checking tire inflation pressure ... 302
MOExtended system* .................. 312
Tire labeling ................................. 313
Load identification ....................... 317
DOT, Tire Identification Number
(TIN) ............................................. 317

33 At a glance
Overhead control panel
Overhead control panel
ItemPage
1Left reading lamp on/off138
2Temperature sensor for
automatic climate control188
3Right reading lamp on/off138
4Interior lighting control138
5Interior rear view mirror49, 185
6Reading lamp138
7Garage door opener257
8Tele Aid (emergency call
system) button250
9Microphone for Tele Aid
and telephone*250,
247

257 Controls in detail
Useful features
The Response Center will then unlock your
vehicle with the remote door unlocking
feature.Stolen Vehicle Recovery services
In the event your vehicle was stolen:
Report the incident to the police.
The police will issue a numbered
incident report.
Pass this number on to the
Mercedes-Benz Response Center along
with your password issued to you when
you subscribed to the service.
The Response Center will then attempt
to covertly contact the vehicle’s Tele
Aid system. Once the vehicle is locat-
ed, the Response Center will contact
the local law enforcement and you. The
vehicle’s location will only be provided
to law enforcement.
Garage door opener
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to
replace up to three hand-held remote
controls used to operate devices such as
garage door openers, gate openers, or
other devices compatible with HomeLink
®
or some other systems.
Before the integrated remote control can
be used, it must be programmed to the
garage door opener, gate operator or other
device you wish to operate. See the
following instructions for programming
information.
iThe remote door unlock feature is available
if the relevant cellular phone network is avail-
able.
The SOS button will flash and the message
Call
Connected
will appear in the multifunction dis-
play to indicate receipt of the door unlock com-
mand.
Once the vehicle is unlocked, a Response Center
specialist will attempt to establish voice contact
with the vehicle occupants.
If the trunk recessed handle was pulled for more
than 20 seconds before door unlock authoriza-
tion was received by the Response Center, you
must wait 15 minutes before pulling the trunk re-
cessed handle again.
iIf the anti-theft alarm or the tow-away alarm
stays on for more than 30 seconds, a call to the
Response Center is initiated automatically by the
Tele Aid system provided Tele Aid service was
subscribed to and properly activated, and that
necessary cellular service and GPS coverage are
available. See anti-theft alarm system
(
page 98) and tow away alarm (page 100).

258 Controls in detail
Useful features
Interior rear view mirror with integrated
remote control
1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of
vehicle equipment):
5Hand-held remote control of
garage door opener, gate
operator or other device
6Hand-held remote control
buttonProgramming the integrated remote
control
Step 1:
Switch on the ignition (page 40).
Warning!G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
– signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.
When programming a garage door opener,
park the vehicle outside the garage.
Do not run the engine while programming
the integrated remote control.
Inhalation of exhaust gas is hazardous to
your health. All exhaust gas contains carbon
monoxide (CO), and inhaling it can cause un-
consciousness and possible death.

259 Controls in detail
Useful features
Step 2:
If you have previously programmed an
signal transmitter button and wish to
retain its programming, proceed to
step 3.
If you are programming the integrated
remote control for the first time, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when indicator lamp1
begins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and be-
gin directly with step 3.Step 3:Hold the end of hand-held remote
control5 of the device you wish to
train approximately 2 to 5 in
(5 to12 cm) away from the signal trans-
mitter button (2, 3 or4) to be pro-
grammed, while keeping indicator
lamp1 in view.
Step 4:
Using both hands, simultaneously
press hand-held remote control
button6 and the desired signal trans-
mitter button (2, 3 or4). Do not
release the buttons until step 5 is com-
pleted.
Indicator lamp1 will flash, first slowly
and then rapidly.Step 5:
After indicator lamp1 changes from a
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
Step 6:
Press and hold the just-trained signal
transmitter button (2, 3 or4) and
observe indicator lamp1.
If indicator lamp1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or4) is pressed and re-
leased.
iIndicator lamp1 flashes immediately the
first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start
flashing after 20 seconds.
iIf indicator lamp1 flashes rapidly for about
2 seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.

260 Controls in detail
Useful features
Step 7:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn” or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual. Step 9:
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.Step 12:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
iSome garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.

262 Controls in detail
Useful features
Operation of integrated remote control
Switch on the ignition (page 40).
Select and press the appropriate inte-
grated signal transmitter button (2,
3 or4) to activate the remote con-
trolled device.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.
Erasing the integrated remote control
memory
Switch on the ignition (page 40).
Simultaneously press and hold outer
signal transmitter buttons2 and 4,
for approximately 20 seconds, until the
indicator lamp1 flashes rapidly. Do
not hold for longer than 30 seconds.
The codes of all three channels are
erased.Programming tips
If you are having difficulty programming
the integrated remote control, here are
some helpful tips:

Check the frequency of hand-held re-
mote control5 (typically located on
the reverse side of the remote). The in-
tegrated remote control is compatible
with radio-frequency devices operating
between 280-390 MHz.

Put a new battery in hand-held remote
control5. This will increase the likeli-
hood of the hand-held remote control
sending a faster and more accurate sig-
nal to the integrated remote control.

While performing step 3, hold
hand-held remote control5 at
different lengths and angles from the
signal transmitter button (2, 3 or4)
you are programming. Attempt varying
angles at the distance of
2 to 5 in (5 to 12 cm) away or the
same angle at varying distances.

If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.

Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
iIf you sell your vehicle, erase the codes of all
three channels.
iCertain types of garage door openers are in-
compatible with the integrated remote control. If
you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance
Center (in the USA only) at
1-800-FOR-MERCedes, or Customer Service (in
Canada) at 1-800-387-0100.

473 Index
Front air bags 73
Front lamps see Headlamps
Fuel 279
Additives 462
Capacity, Fuel tank 457
Consumption statistics 167
Filler flap 279
Fuel reserve warning lamp 29, 350
Gasoline additives 462
Gauge 29
Premium unleaded gasoline 280,
459, 461
Refueling 279
Requirements 461
Fuel filler flap, Opening 279
Fuels, coolants, lubricants etc.
Capacities 457
Functions (control system) 145
Fuse box
Passenger compartment 439
Trunk 439
Fuse chart see Vehicle tool kit
Fuses 437G
Garage door opener 257
Gasoline see Fuel
GAWR 323
Gear range
Automatic transmission 176
Indicator 29
Limiting 176
Shifting into optimal 180, 182
Gear selector lever 32, 172
Cleaning 339
Gearshift pattern 172
Lock 53
Position 173, 174
Shifting procedure 173
Gear selector lever one-touch gearshifting
Automatic transmission 179
Global locking/unlocking see Key
Glove box 238
Good visibility 185
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 323
GVWR 323H
Hard plastic trim items, cleaning 339
Hardtop see Retractable hardtop
Hazard warning flasher 137
Head restraints 45
Headlamp switch-off delay see Delayed
switch-off, exterior lamps
Headlamps
Automatic mode 132
Cleaning lenses 336
Cleaning system 185
Manual mode 132
Messages in the multifunction
display 392
Replacing bulbs 409
Switch 57, 131
Headliner, cleaning 340
Head-thorax air bag 74
High beam flasher 57, 136
High beam headlamps 57, 131, 410
Indicator lamp 29
Messages in the multifunction
display 392, 393
Replacing bulbs 409, 412
Switching on 136
High mounted brake lamp 410