wiper blades MERCEDES-BENZ SL600 2004 R230 Owner's Manual

Contents
Practical hints................................. 281
What to do if … .................................. 282
Lamps in instrument cluster ........ 282
AIRBAG OFF indicator lamp ......... 290
Messages in the display ............... 291
Where will I find ...? ........................... 323
First aid kit ................................... 323
Vehicle tool kit, jack, and spare
wheel ........................................... 323
Locking/unlocking in an emergency . 325
Unlocking the vehicle ................... 325
Locking the vehicle ...................... 327
Lowering the load assist manually 327
Replacing batteries in the
SmartKey/SmartKey with
KEYLESS-GO* .............................. 328
Replacing bulbs ................................. 331
Bulbs ............................................ 331
Replacing bulbs for front lamps ... 334
Replacing bulbs for rear lamps..... 335Replacing wiper blades....................... 337
Removing wiper blades ................. 337
Installing wiper blades .................. 338
Flat tire ............................................... 339
Preparing the vehicle .................... 339
Sealing tires with TIREFIT kit 1...... 340
Sealing tires with TIREFIT kit 2...... 345
Mounting the spare wheel ............ 350
Batteries ............................................. 358
Disconnecting the batteries .......... 360
Removing the batteries ................. 361
Charging and reinstalling
batteries ....................................... 361
Reconnecting the batteries ........... 361
Jump starting ...................................... 363
Towing the vehicle .............................. 365
Installing towing eye bolt .............. 368
Fuses .................................................. 369
Main fuse box ............................... 369
Technical data.................................. 371
Spare parts service ............................ 372
Warranty coverage ............................. 373
Loss of Service and Warranty
Information Booklet ...................... 373
Identification labels ............................ 374
Layout of poly-V-belt drive.................. 375
SL 500 .......................................... 375
SL 55 AMG ................................... 375
SL 600 .......................................... 375
Engine ................................................ 376
Rims and tires .................................... 378
Same size tires ............................. 379
Mixed size tires ............................. 380
Spare wheel .................................. 382
Electrical system ................................ 383
Main dimensions ................................ 384
Weights .............................................. 385

48 Getting startedDrivingSwitching on windshield wipers
Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
0Windshield wipers off
IIntermittent wiping (interval depen-
dent on wetness of windshield)
IINormal wiper speed
IIIFast wiper speed (Canada only:
goes to setting II when the car is
standing still)Single wipe

Press switch briefly in the direction of
arrow1.
The windshield wipers wipe one time
without washer fluid.
Wiping with windshield washer fluid

Push switch in the direction of
arrow1 past the resistance point.
The windshield wiper operates with
washer fluid.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
page 261).
iThe intermittent wiping interval is de-
pendent on wetness of windshield.
Wiping will not occur with a door open.
!Do not leave windshield wipers in inter-
mittent setting when vehicle is taken to
an automatic car wash or during wind-
shield cleaning. Wipers will operate in
the presence of water sprayed on the
windshield, and wipers may be dam-
aged as a result.
The switch should not be left in inter-
mittent setting as the wipers will wipe
the windshield once every time the en-
gine is started. Dust that accumulates
on the windshield might scratch the
glass and/or damage the wiper blades
when wiping occurs on a dry wind-
shield.

168 Controls in detailGood visibilityWindshield wipers
For information on windshield wiper opera-
tion, see “Windshield wipers” (
page 47).
A rain sensor automatically controls the
windshield wipers depending on how wet
the windshield is.

Switch on ignition.

Set wiper switch to position I
(page 47).
After the initial wipe, pauses between
wipes are automatically controlled by the
rain sensor.
Headlamp cleaning system
The switch is located on the left side of the
dashboard.
1Headlamp washer switch
Switch on ignition.

Press switch1.
The headlamps are cleaned with a
high-pressure water jet.
For information on filling up the washer flu-
id reservoir, see “Windshield washer sys-
tem and headlamp cleaning system”
(
page 261).
iIntermittent wiping is interrupted when
the vehicle is at a standstill and a door
is opened.
!Do not leave windshield wipers in inter-
mittent setting when vehicle is taken to
an automatic car wash or during wind-
shield cleaning. Wipers will operate in
the presence of water sprayed on the
windshield, and wipers may be dam-
aged as a result.
The switch should not be left in inter-
mittent setting as the wipers will wipe
the windshield once every time the en-
gine is started. Dust that accumulates
on the windshield might scratch the
glass and/or damage the wiper blades
when wiping occurs on a dry wind-
shield.

253 Operation
Engine compartment
Engine compartment
Hood
Opening
1Hood release

Pull lever1 downwards.
The hood is unlocked.
2Lever for opening the hood

Push lever2 on the hood upwards.

Pull up on the hood and then release it.
The hood will be automatically held
open at shoulder height by gas-filled
struts.
Warning!
G
Do not pull the release lever while the vehi-
cle is in motion. Otherwise the hood could
be forced open by passing air flow.
!To avoid damage to the windshield wip-
ers or hood, never open the hood if the
wiper arms are folded forward away
from the windshield.
Warning!
G
To help prevent personal injury, stay clear of
moving parts when the hood is open and the
engine is running. Make sure the hood is
properly closed before driving. When closing
the hood, use extreme caution not to catch
hands or fingers.
The radiator fan may continue to run for ap-
proximately 30 seconds or may even restart
after the engine has been turned off. Stay
clear of fan blades.

277 Operation
Vehicle care
Cleaning the Distronic* system sensor
cover
1Distronic* system sensor cover
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water to clean sen-
sor cover1.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the sensor cover. Do
not attempt to wipe dirty sensors with a
dry cloth or sponge.Cleaning the Parktronic* system
sensors
1Parktronic* system sensors

Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water to clean sen-
sors 1.
When using a steam cleaner or power
washer, aim nozzle only briefly from a min-
imum distance of 4 in (10 cm) at
sensors1.To prevent scratches, never apply strong
force and only use a soft, non-scratchy
cloth when cleaning the sensors. Do not
attempt to wipe dirty sensors with a dry
cloth or sponge.
Wiper blades

Turn on the wipers and place them in a
vertical position.
For information on how to position the wip-
ers in a vertical position, see “Replacing
wiper blades” (
page 337).
!Fold the windshield wiper arms away
from the windshield to a vertical posi-
tion only. They could otherwise dam-
age the hood.


278 OperationVehicle care
Clean the wiper blade inserts with a
clean cloth and detergent solution.Window cleaning

Turn on the wipers and place them in a
vertical position.
For information how to position the wipers
in a vertical position, see “Replacing wiper
blades” (
page 337).

Use a window cleaning solution on all
glass surfaces.
An automotive glass cleaner is recom-
mended.
Warning
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch before
cleaning the wiper blade. Otherwise, the
wiper motor might suddenly turn on and
cause injury.!Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
!Fold the windshield wiper arms away
from the windshield to a vertical posi-
tion only. They could otherwise dam-
age the hood.Warning
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch before
cleaning the wiper blade. Otherwise, the
wiper motor might suddenly turn on and
cause injury.
!Fold the windshield wiper arm back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.


281 Practical hints
What to do if …
Where will I find ...?
Locking/unlocking in an emergency
Replacing bulbs
Replacing wiper blades
Flat tire
Batteries
Jump starting
Towing the vehicle
Fuses

337 Practical hints
Replacing wiper blades
Replacing wiper blades
Removing wiper blades
Turn SmartKey in starter switch to
position1.

Turn combination switch to wiper
settingII (
page 47).

With wiper arms in the vertical position,
turn SmartKey in starter switch to
position0.

Fold the wiper arm forward until it
snaps into place.

Turn wiper blade at a right angle to the
wiper arm.

Slide the wiper blade sideways out of
the retainer.
!To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
Warning!
G
For safety reasons, remove SmartKey from
starter switch before replacing a wiper
blade. Otherwise the motor could suddenly
turn on and cause injury.

338 Practical hintsReplacing wiper bladesInstalling wiper blades
Slide the wiper blade onto the wiper
arm until it locks in place.

Rotate the wiper blade into a position
parallel to the wiper arm.

Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.
!Never open the hood when the wiper
arms are folded forward.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make sure the wiper blades are proper-
ly installed. Improperly installed wiper
blades may cause windshield damage.
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

417 Index
Regular checks 252
Regular driving style 208
Remote Vehicle Diagnostics 400
Replacing
Backup lamp bulbs 335
Brake lamp bulbs 332
Bulbs 331
Front lamp bulbs 334
Front turn signal bulbs 334
Fuses 369
High beam bulbs 334
License plate lamp bulbs 336
Low beam bulbs 334
Rear fog lamp bulb 335
Rear lamp bulbs 332, 335
Rear turn signal bulbs 335
Wiper blades 337
Reset button 23
Resetting
All functions (control system) 137Fuel consumption statistics 151
Service indicator (FSS) 272
Trip odometer 125
Residual heat utilization 178
Restraint systems 58
Airbags 58
Child seat recognition 58
Child seats 58
Emergency Tensioning Device
(ETD) 58, 68
Seat belts 58, 65
Resume function
Cruise control 195
Distronic* 202
Retractable hardtop 401
Closing (SmartKey) 189
Closing (switch) 186
Convenience feature 189
Locking after raising/lowering 187
Message in display 309
Opening (SmartKey) 188Opening (switch) 185
Problems when operating 189
Summer opening feature 188
Roll bar 69, 401
Lowering 70
Messages in display 316
Raising 69
Warning lamp 23
Roll bar buttons 26
RON 251, 401
Roof see Retractable hardtop
Rubber parts
Cleaning 280
S
Satellite-radio* 133
SBC brake system 75, 81, 401
Activation 82
Deactivation 83
Driving hints 83
Messages in display 299, 300