MERCEDES-BENZ SLC 2017 Owners Manual

X
To select ap reset list or station list: press
and briefl yh ol dt he c or d button until
the preset list or statio nl is tint he desired
frequency rang eiss hown.X
To select as tation: briefl yp ress c
or d .
SIRIUS XM satellite radio functions like an ormal
radio.
For more informatio nonr adio operation, see
"Satellite radio "i nt he separate operating
instructions.
Operatin gana udi op layer or audio
media
Audio data from various audi od ev ice sorm edia
can be played ,d epen ding on the equipment
installe dint he vehicle.X
Switch on the multimedia system and select
audi oCDorM P3 mod e( se et he separate
operating instructions). X
Press the Y or e button on the steering
whee ltos elect the Audio menu.X
To select the next/previous track: briefly
press the c or d button.X
To select at rack from the track list (rapid
scrolling): press and hol dt he c or d
button unti ld esir ed track C appears.
If yo up ress and hol dt he c or d button,
the rapid scrolling speed is increased .N ot all
audi od rives or data carriers support thi sf unc-
tion.
If trac ki nformatio ni ss tored on the audio
device or medium, the multifunctio nd is play
will sho wt he numbe ra nd titl eoft he track. Vide oD VD operation X
Switch on the multimedia system and select
video DVD (se et he separate operating
instructions). X
Press the Y or e button on the steering
whee ltos elect the Audio menu.X
To select the next or previous scene:
briefl yp ress the c or d button.X
To select as cene from the scen el is t
(rapi ds cr olling): press and hol dt he c
or d button unti ld esir ed scene C
appears.
Telephone menu
Introduction
G WARNING
If yo uo pe rate informatio ns ys tem sa nd com-
municatio ne quipment integrated in the vehi-
cle whil ed riving ,y ou will be distracted from
traffic conditions. Yo uc ould also lose control
of the vehicle. There is ar is kofana ccident.
Onl yo pe rate the equipment when the traffic
situatio np er mits. If yo ua re not sure tha tt his
is possible, park the vehicl ep ayin ga ttention
to traffic conditions and operate the equip-
ment when the vehicl eiss tationary.
Whe nt elephoning, yo um us to bs erve the legal
requirements for the country in which yo ua re
currentl yd riving. X
Switch on the mobil ep hone (se et he manu-
facturer’ so pe rating instructions). X
Switch on the multimedia system
( Y
page 212). X
Establis haB luetooth ®
connectio ntot he mul-
timedi as ys tem ( Y
page 214).X
Press the Y or e button on the steering
whee ltos elect the Tel menu.Menus and submenus 169
On-board computer and displays Z

You will see one of the followin gd isplay mes-
sages in the multifunction display: R
Phon eR EADY or the name of the network
provider: the mobile phon eh as foun dan et-
work and is ready to receive. R
Phon eNoS ervice :t here is no network
available or the mobile phon eiss earching for
an etwork.
Accepting ac allIf someone calls you when you are in the Tel
menu, ad isplay messag ea ppears in the multi-
function display.
You can accept ac all at any tim er egardless of
the men us elected.X
Press the a button on the steerin gw heel
to accept an incomin gc all.
Rejecting or ending ac allX
Press the v button on the steerin gw heel
to reject or end ac all.
Selecting an entr yint he phone bookX
Press the Y or e button on the steering
wheel to select the Tel menu.X
Press the c , d or v button to
switc htot he phon eb ook.X
Authoriz ea ccess to the phon eb ook on the
phone. X
Press d or c to select the names one
afte rt he other.
or X
To start rapid scrolling: press and hold
the d or c button for longe rt han one
second.
The names in the phon eb ook are displayed
quickly one afte rt he other.
Rapid scrolling stops when you release the
button or reach the end of the list. X
If only one telephone number is stored for
an ame: press the a or v button to
star td ialing.
or X
If there is mor et ha no ne number for a
particula rn ame: press the a or v
button to display the numbers. X
Press the c or d button to select the
numbe ry ou want to dial. X
Press the a or v button to star td ialing.
or X
To exit th et elephone book: press the v
or 8 button.
Redialing The on-board computer saves the last names or
numbers dialed in the redial memory. X
Press the Y or e button on the steering
wheel to selec tt he Tel menu.X
Press the a button to switc htot he redial
memory. X
Press the c or d button to selec tt he
desired name or number. X
Press the a or v button to star td ialing.
or X
To exit th er edial memory: press the v
or 8 button.
Assistance menu
Introduction Depending on your vehicle's equipment, in the
DriveAssist menu, you have the following
options: R
Displayin gt he assistanc eg raphic
( Y
page 171) R
Activatin gord eactivatin gA ct iv eB rak eA ssist
( Y
page 171) R
Activating/deactivatin gA TTENTIO NA SS IST
( Y
page 171) R
Activating/deactivatin gB lin dS pot Assist
( Y
page 171) R
Activating/deactivatin gL ane Keepin gA ssist
( Y
page 171)170
Menus and submenus
On-board computer and displays

Displaying th ea ss istance graphicX
Press th e Y or e butto nont he steerin g
whee lt os elec tt he DriveAssist menu.X
Press c or d to selec t Assist .
Graphi c .X
Press v to confirm your selection .
The multifunction display shows th eD istance
Pilo tD ISTR ONIC distanc ed isplay in th ea ssis-
tanc eg ra phic.
The assistanc eg ra phi cs hows you th es tatu s
of and/o ri nformati on from other drivin gs ys -
tems or drivin gs afet ys ystems :R
Distanc eP ilo tD ISTR ONIC ( Y
page 140)R
Active Brak eA ss is t( Y
page 56)R
ATTENTION ASSIST ( Y
page 158)R
Lan eK eepin gA ss is t( Y
page 160)
Activating/deactivating Active Brak e
Assist You can use this function to activat eord eacti -
vat eA ctiv eB rake Assist.X
Press th e Y or e butto nont he steerin g
whee lt os elec tt he DriveAssist. menu.X
Press th e c or d butto ntos elec t
Brake Assist .X
Press v to confirm .
The curren ts election appears .X
To activate/deactivate : press th e v but -
to na gain .
If Active Brak eA ss is tisd eactivated, th e

Service menu Depending on the equipment installed in the
vehicle, you have the following options in the
Serv. menu:R
Calling up display messages ( Y
page 178)R
Restarting the tire pressure loss warning sys-
tem ( Y
page 262)R
Checking the tire pressure electronically
( Y
page 262)R
Calling up the service due date
( Y
page 235)
Settings menu
Introduction Depending on the equipment installed in the
vehicle, in the Sett. menu you have the follow-
ing options: R
Changing the instrumen tc luster settings
( Y
page 172)R
Changing the light settings ( Y
page 172)R
Changing the vehicle settings ( Y
page 173)R
Changing the convenience settings
( Y
page 174)R
Restoring the factory settings ( Y
page 175)
Instrument cluster
Selecting the distance unit The Display Unit Speed-/Odometer: func-
tion allow sy ou to choose whether certain dis-
play sa ppear in kilometers or miles in the mul-
tifunction display. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Instrument Cluster submenu.X
Press v to confirm.X
Press the d or c button to select the
Display Unit Speed-/Odometer function.
The current setting km or miles appears.X
Press the v button to save the setting.
The selected unit of measurement for distance
applie st o:R
the digital speedometer in the Trip menuR
the odometer and trip odometer R
the trip computer R
the current consumption and the range R
navigation instructions in the Navi menuR
cruise control R
Distanc eP ilot DISTRONIC R
ASSYST PLUS service interval display
Selecting permanent display The Permanent Display: function allow sy ou
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Instrument Cluster submenu.X
Press v to confirm. X
Press the d or c button to select the
Permanent Display: function.
The current setting, Outside Temperature
or Speedometer [km/h] or Speedometer
[mph] ,a ppears. X
To change the setting: press v again.
Lights
Setting the daytime running lights This function is not available in Canada. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Light submenu. X
Press v to confirm. X
Press the d or c button to select the
Daytime Running Lights function.
If the Daytime Running Lights function has
been switched on, the cone of light and the

X
Press v to confirm.X
Press the d or c button to select the
Amb. Light +/- function.
The curren ts etting appears.X
Press v to confirm.X
Press the d or c button to adjust the
brightness to any level from Off to Level 5
(bright). X
Press the v or 8 button to save the
setting.
Setting the ambient lighting color X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Light submenu.X
Press v to confirm.X
Press the d or c button to select the
Amb. Light Col. function.X
Press v to confirm.X
Press the d or c button to set the color
to SOLAR , SOLAR Orange or SOLAR Red .X
Press the v or 8 button to save the
setting.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Light submenu.X
Press v to confirm.X
Press d or c to select the Surround
Lighting function.
If the Surround Lighting function is activa-
ted, the multifunction display shows the light
cone and the area around the vehicle in
orange. X
Press the v button to save the setting.
Deactivating delayed switch-off of the exterior
lighting temporarily: X
Before leaving the vehicle, turn the SmartKey
to position 0 in the ignition lock.X
Turn the SmartKey to position 2 in the ignition
lock.
The exterior lighting delayed switch-off is
deactivated.
Delayed switch-off of the exterior lighting is
reactivated the next time you start the engine. If you have activated the Surround lighting
function and you turn the light switch to X ,
the following functions are activated when it is
dark: R
surround lighting: the exterior lighting
remains lit for 40 seconds after unlocking
with the SmartKey. If you start the engine, the
surround lighting is switched off and auto-
matic headlamp mode is activated
( Y
page 93). R
exterior lighting delayed switch-off: the
exterior lighting remains lit for 60 seconds
after the engine is switched off. If you close all
the doors and the trunk lid, the exterior light-
ing goes off after 15 seconds.
Dependin gony our vehicle's equipment, when
the surround lighting and delayed switch-off
exterior lighting are on, the following light up: R
Parking lamps R
Low-beam headlamps R
Daytime runnin gl amps R
Side marker lamps R
Surround lighting in the exterior mirrors
Activating/deactivating the interior light-
ing delayed switch-off If you activat et he Interior Lighting Delay
function, the interior lighting remains on for
20 seconds after you remove the SmartKey from
the ignition lock. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Light submenu. X
Press v to confirm. X
Press the d or c button to select the
Interior Lighting Delay function.
When the Interior Lighting Delay func-
tion is activated, the vehicle interior is dis-
played in orange in the multifunction display. X
Press the v button to save the setting.
Vehicle
Activating/deactivating the automatic
door locking mechanism
If you activat et he Automatic Door Lock func-
tion, the vehicle is centrally locked above a
speed of approximately 9m ph (15 km/h).Menus and submenus 173
On-board computer and displays Z

X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Vehicle submenu.X
Press v to confirm.X
Press the d or c button to select the
Automatic Door Lock function.
When the Automatic Door Lock function is
activated, the multifunction display shows the
left-hand vehicle door in orange. X
Press the v button to save the setting.
For further information on the automatic locking
feature, see ( Y
page 69).
Activating/deactivating the acoustic
locking verification signal If you switch on the Acoustic Lock function, an
acoustic signal sounds when you lock the vehi-
cle. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Vehicle submenu.X
Press v to confirm.X
Press the d or c button to select the
Acoustic Lock function.
If the Acoustic Lock function is activated,
the 7 symbol in the multifunction display
lights up orange. X
Press the v button to save the setting.
Convenience
Activating/deactivating the EASY-
ENTRY/EXI Tf eature
G WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steerin gw heel, you and other vehicle
occupant s–p articularly children –c ould
become trapped. There is ar isk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel. If somebody becomes trapped: R
press one of the memory function position
buttons, or R
move the switch for steerin gw heel adjust-
ment in the opposite direction to that in
which the steerin gw heel is moving.
The adjustmen tp rocess is stopped. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Using d or c ,s elect the Easy Entry/
Exit function.
If the Easy Entry/Exit function is activated,
the multifunction display shows the steering
wheel in orange. X
Press the v button to save the setting.
Further information on the EASY-ENTRY/EXIT
feature ( Y
page 87).
Switching the belt adjustment on/off X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Press the d or c button to select the
Belt Adjustment function.
When the Belt Adjustment function is acti-
vated, the seat belt is displayed in orange in
the multifunction display. X
Press the v button to save the setting.
For further information on belt adjustment, see
( Y
page 41).
Switching the fold-in mirrors when lock-
ing feature on/off
This function is only availabl ew hen the vehicle is
equipped with the electrical fold-in function.
This function is only availabl einC anada.
When you activat et he Auto. Mirror Folding
function, the exterior mirrors are folded in when
the vehicle is locked.
If you have switched on the Auto. Mirror
Folding function and you fold in the exterior
mirrors using the button on the door
( Y
page 89), they will not fold out automatically.174
Menus and submenus
On-board computer and displays

The exterior mirrors can then only be folded out
using the button on the door. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu.X
Press v to confirm.X
Press the d or c button to select the
Auto. Mirror Folding function.
If the Auto. Mirror Folding function is
switched on, the multifunction display shows
the exterior mirror in orange. X
Press the v button to save the setting.
Restoring the factor ys ettingsX
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Factory Setting submenu.X
Press v to confirm.
The Reset All Settings? function
appears. X
Press the d or c button to select No or
Yes .X
Press the v button to confirm the selec-
tion.
If you have selected Yes
and confirmed, the
multifunction display shows ac onfirmation
message.
For safety reasons, the Daytime Running
Lights function in the Light submenu is only
reset if the vehicle is stationary.
AMG menu (Mercedes-Benz SLC 43
AMG)
Warm-up
C
Digital speedometer
D
Gear indicator

RACETIMER Displaying and startin gR ACETIMERThe RACETIMER is only intended for us eona
closed race circuit. Do not us et he function on
public roads.
C
LapD
RACETIMER
Yo uc an star tt he RACETIMER when the engine is
running or if the SmartKey is in position 2 in the
ignition lock. X
Press the Y or e button on the steering
wheel to select the AMG menu.X
Press the c button repeatedl yu nti lt he
RACETIMER appears. X
To start: press the v button to star tt he
RACETIMER.
Displaying the intermediate time
X
Press the Y or e button to select
Interm. Time .X
Press v to confirm.
The intermediate time appears for five sec-
onds. Startin gan ew lap
C
RACETIMER D
Fastest la pt ime (best lap)

If you switch off the engine, the RACETIMER is
reset to "0" after 30 seconds. All lap sa re
deleted.
You cannot delete individual stored laps. If you
have stopped 16 laps, the current lap does not
have to be reset. X
Rese tt he current lap.X
Press v to confirm Reset .
Reset Race-Timer? appears in the multi-
function display. X
Press the d button to select Yes and press
the v button to confirm.
All lap sa re deleted.
Overall statistics
C
RACETIMER overal le valuationD
Total time driven

Display messages
Introduction
General notes Display messages appear in th em ultifunction display.
Display messages wit hg ra phi cd isplays may be shown in simplified form in th eO perator's Manual
and may therefore diffe rf ro mt he multifunction display.
Please respon dina ccordance wit ht he display messages and follow th ea dditional note sint hi s
Operator's Manual.
Certain display messages are accompanied by an audible warnin gt on eora continuous tone .
Whe ny ou stop and par kt he vehicle, please observ et he note so n:R
HOLD function ( Y
page 148)R
Parking ( Y
page 131)
Hiding display messages X
Press th e v or 8 butto nont he steerin gw heel.
The multifunction display hide st he display message.
High-priorit yd isplay messages are shown in red in th em ultifunction display. Some high-priorit y
display messages canno tbeh idden .
The multifunction display shows these messages continuously until th ec auses fo rt he messages
hav eb ee nr emedied.
Message memory The on-boar dc om pute rs aves certain display messages in th e message memory .Y ou can cal lu p
th ed isplay messages: X
Press th e Y or e butto nont he steerin gw hee lt os elec tt he Serv. menu.
If there are display messages, th em ultifunction display shows 2M essages ,f or example.X
Press th e c or d butto ntos elec tt he entry, e.g. 2M essages .X
Press v to confirm .X
Press th e c or d butto ntos crol lt hrou gh th ed isplay messages.
Whe nt he ignition is switched off, all display messages are deleted, apar tf ro ms om eh igh-priorit y
display messages. Once th ec auses of th eh igh-priorit yd isplay messages hav eb ee nr ectified, th e
correspondin gd isplay messages are also deleted.178
Display messages
On-boar dc omputer an dd isplays