maintenance MERCEDES-BENZ SLC 2017 User Guide

ASSYS TP LUS
Service messages The ASSYS TP LU Ss ervic ei nterval display
inform sy ou of th en ex ts ervic ed ue date.
Information on th et yp eofs ervic ea nd servic e
intervals (see th es eparat eM aintenance Book -
let).
You can obtain further information from an
authorize dM ercedes-Benz Cente rora t
http://www.mbusa.co m( US Ao nl y).
i The ASSYS TP LU Ss ervic ei nterval display
does no ts ho wa ny information on th ee ng in e
oil level. Observ et he note sont he engin eo il
level ( Y
page 232).
The multifunction display shows as ervic em es -
sage for several seconds, e.g. :R
Servic eAin..D ay sR
Servic eAD ueR
Servic eAE xceeded by .. Day s
Dependin gont he operating condition soft he
vehicle, th er emaining time or distanc eu ntil th e
next servic ed ue dat eisd isplayed.
The lette r A or B ,p ossibl yinc onnectio nw it ha
number or another letter, shows th et yp eofs er -
vice. A stand sf or am inor servic ea nd B for a
major service.
You can obtain further information from an
authorize dM ercedes-Benz Center.
The ASSYS TP LU Ss ervic ei nterval display does
no tt ak ei nt oa ccoun ta ny periods of time during
whic ht he battery is disconnected.
Maintainin gt he time-dependen ts ervic es ch ed-
ule: X
Not ed own th es ervic ed ue dat ed isplayed in
th em ultifunction display before disconnect -
ing th eb attery.
or X
Afte rr econnecting th eb attery, subtrac tt he
battery disconnection periods from th es er -
vic ed at es hown on th ed isplay.
Hiding as ervice messageX
Press th e v or 8 butto nont he steering
wheel. Displaying service messages X
Switc hont he ignition .X
Press th e Y or e butto nont he steering
whee lt os elect th e Serv. menu.X
Press th e c or d butto ntos elect th e
ASSYST PLU S submen ua nd confirm by press-
ing th e v button.
The servic ed ue dat ea ppear sint he multi-
function display.
Infor ma ti on abou tS ervice
Resetting th eA SSYS TP LUS service
interval display
! If th eA SS YS TP LU Ss ervic ei nterval display
has been inadvertentl yr eset ,t hi ss etting can
be correcte dataq ualified specialist work-
shop.
Hav es ervic ew or kc arrie do ut as described in
th eM aintenance Booklet .T his may otherwise
lead to increased wear and damag etot he
major assemblies or th ev ehicle.
Aq ualified specialist workshop ,e .g .ana uthor-
ized Mercedes-Benz Center, will reset th e
ASSYS TP LU Ss ervic ei nterval display after th e
servic ew or kh as been carrie do ut .Y ou can also
obtain further information on maintenance
work, for example.
Special service requirements The specifie dm aintenance interval takes only
th en orma lo peration of th ev ehicl ei nt o
account. Under arduous operating condition so r
increased load on th ev ehicle, maintenance
wor km us tbec arrie do ut mor ef re quently, for
example: R
regular cit yd rivin gw it hf re quen ti ntermediat e
stops R
if th ev ehicl eisp rimarily used to travel short
distances R
use in mountainous terrain or on poor road
surfaces R
if th ee ng in eiso ften lef ti dlin gf or lon gp eriods
Under these or similar conditions, have, for
example, th ea ir filter, engin eo il and oil filter
replace dorc ha nged mor ef re quently. Under
arduous operating conditions, th et ir es mus tb e
checke dm or eo ften .F urther information can beASSYST PLUS 235
Maintenance and care Z

obtained at aq ualified specialist workshop, e.g.
an authorized Mercedes-Benz Center.
Driving abroad An extensive Mercedes-Benz Service network is
also available in other countries. You can obtain
further information from any authorized
Mercedes-Benz Center.
Care
Notes on care
H Environmental note
Dispose of empty packaging and cleaning
cloths in an environmentally responsible man-
ner.
! For cleaning your vehicle, do not use any of
the following: R
dry, rough or hard cloths R
abrasive cleaning agents R
solvents R
cleaning agents containing solvents
Do not scrub.
Do not touch the surfaces or protective films
with hard objects, e.g. ar ing or ice scraper.
You could otherwise scratc hord amage the
surfaces and protective film.
! Do not park the vehicle for an extended
period straight after cleaning it, particularly
after having cleaned the wheels with wheel
cleaner. Wheel cleaners could cause
increased corrosion of the brake discs and
brake pads/linings. For this reason, you
should drive for af ew minutes after cleaning.
Brakin gh eats the brake discs and the brake
pads/linings, thus drying them. The vehicle
can then be parked.
Regula rc are of your vehicle is ac ondition for
retaining the quality in the long term.
Use care products and cleaning agents recom-
mended and approved by Mercedes-Benz. Washing the vehicle and cleaning the
paintwork
Automatic car wash
G WARNING
Brakin ge fficienc yisr educed after washing
the vehicle. There is ar isk of an accident.
After the vehicle has been washed, brake
carefully while paying attention to the traffic
conditions until full braking power is restored.
! If DISTRONIC PLUS or the HOLD function is
activated, the vehicle brakes automatically in
certain situations.
To prevent damage to the vehicle, deactivate
DISTRONIC PLUS and the HOLD function in
the following or other similar situations: R
when towing the vehicle R
in the car wash
! It is preferable to use car washes with
adjustable high-pressure pre-cleanin gt hat
corresponds to the specification for the Cab-
riolet program. In car washes that use high
water pressures, there is ar isk that as mall
amount of water may leak into the vehicle.
! Designo retractable hardtop: make sure
that the vehicle is not subsequently treated
with hot wax.
! Lock the car if you wash it in an automatic
car wash. Otherwise, the vehicle might be
damaged.
! Never clean your vehicle in aT ouchless
Automatic Car Wash as these use special
cleaning agents. These cleaning agents can
damage the paintwork or plastic parts.
If you have your vehicle cleaned in ah igh-
pressure automatic car wash, small amounts
of water may enter the vehicle.
! Make sure that the automatic transmission
is in position N when washing your vehicle in
at ow-through car wash. The vehicle could be
damaged if the transmission is in another
position.236
Care
Maintenance and care

! Make sure that: R
the side windows and the roof are com-
pletely closed R
the climate control blower is switched off R
the windshiel dw iper switch is at position 0
The vehicle could otherwise be damaged.
You can wash the vehicle in an automatic car
wash from the very start.
If the vehicle is very dirty, pre-wash it before
cleaning it in an automatic car wash.
After using an automatic car wash, wipe off wax
from the windshiel da nd the wiper blades. This
will prevent smears and reduce wiping noises
caused by residue on the windshield.
Washing by hand In some countries, washing by hand is only
allowed at speciall ye quipped washing bays.
Observe the legal requirements in each country. X
Do not use hot water and do not wash the
vehicle in direct sunlight. X
Use as oft sponge to clean.X
Use am ild cleaning agent, such as ac ar
shampoo approved by Mercedes-Benz. X
Thoroughly hose down the vehicle with ag en-
tle jet of water. X
Do not point the water jet directly towards the
air inlet. X
Use plenty of water and rinse out the sponge
frequently. X
Rinse the vehicle with clean water and dry
thoroughly with ac hamois.X
Do not let the cleaning agent dry on the paint-
work.
Carefully remove all deposits of road salt as
soon as possible when driving in winter.
Powe rw ashers
G WARNING
The water jet from ac ircular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
nent sd amage dint his way may fail unexpect-
edly .T here is ar isk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged tires or chassis component sr eplaced imme-
diately.
! Alway sm aintain ad istance of at least
11.8 in (30 cm) between the vehicle and the
power washer nozzle. Information abou tt he
correct distance is available from the equip-
ment manufacturer.
Move the power washer nozzle around when
cleaning your vehicle.
Do not aim directly at any of the following: R
Tires R
Door gaps, roof gaps, joints, etc. R
Soft top (Designo retractable hardtop) R
Electrical components R
Battery R
Connectors R
Lights R
Seals R
Trim R
Ventilation slots
Damaged seals or electrical component sc an
lead to leaks or failures.
! Do not use high-pressure cleaners if the
tank recess is open while you clean it. This
can cause damage to the seals or other com-
ponents.
Cleaning the paintwork
! Do not affix: R
stickers R
films R
magnetic plates or simila ri tems
to painted surfaces. You could otherwise
damage the paintwork.
Scratches, corrosive deposits, areas affected by
corrosion and damage caused by inadequate
care cannot always be completely repaired. In
such cases, visit aq ualified specialist workshop. X
Remove dirt immediately ,w here possible,
while avoiding rubbing too hard. X
Soak insect remains with insect remover and
rinse off the treated areas afterwards. X
Soak bird droppings with water and rinse off
the treated areas afterwards. X
Remove coolant, brake fluid, tree resin, oils,
fuels and greases by rubbing gently with a Care 237
Maintenance and care Z

Do not us ep ower washers with circular jet
nozzles to clean the vehicle. Hav ed amaged
tire sorc hassi sc omponents replaced imme-
diately.
! Do not us ea cidi cw heel cleaning products
to remove brake dust. Thi sc ould damage
whee lb ol ts and brake components.
! Do not park your vehicl ef or al on gp er io do f
time directl ya ft er cleaning, particularly after
cleaning the whee lr im with whee lc leaner.
Whee lc leane rc an lead to the increased cor-
rosio noft he brake discs and pads .T herefore,
drive for af ew minute sa ft er cleaning. By
heating up the brakes ,t he brake discs and
pads dry .T he vehicl ec an the nb ep ar ked for a
long perio doft ime.
Cleanin gt he windows
G WARNING
Yo uc ould become trapped by the windshield
wipers if the ys tart moving whil ec leaning the
windshiel dorw iper blades. There is ar is ko f
injury.
Alway ss wi tch off the windshiel dw iper sa nd
the ignition befor ec leaning the windshiel do r
wipe rb lade s.
! Do not us ed ry cloths, abrasive products,
solvents or cleaning agents containing sol-
vents to clean the insid eoft he windows .D o
not touch the insides of the windows with
hard objects ,e .g .ani ce scrape rorr ing. There
is otherwis ear is kofd amagin gt he windows.
! Clea nt he water drainage channel soft he
windshiel da nd the rea rw in do watr egular
intervals .D eposits such as leaves, petal sa nd
pollen ma yu nder certain circumstances pre-
vent water fro md raining away .T hi sc an lead
to corrosion damage and damage to elec-
troni cc omponents.X
Clea nt he insid ea nd outside of the windows
with ad am pc loth and ac leaning product that
is recommende da nd approved by Mercedes-
Benz. Cleanin gw ip er blades
G WARNING
Yo uc ould become trapped by the windshield
wipers if the ys tart moving whil ec leaning the
windshiel dorw iper blades. There is ar is ko f
injury.
Alway ss wi tch off the windshiel dw iper sa nd
the ignition befor ec leaning the windshiel do r
wipe rb lade s.
! Do not pull the wipe rb lade .O therwise, the
wipe rb lade could be damaged.
! Do not clean wipe rb lade st oo ofte na nd do
not ru bt he mt oo hard. Otherwise, the graph-
ite coating could be damaged. Thi sc ould
cause wipe rn oise.
! Hol dt he wipe ra rm securel yw he nf olding
back. The windshiel dc ould be damage dift he
wipe ra rm smacks against it suddenly. X
Fol dt he windshiel dw iper arms away fro mt he
windshield. X
Carefully clean the wipe rb lade sw it had am p
cloth. X
Fol dt he windshiel dw iper arms back again
befor es wi tching on the ignition.
Cleanin gt he exterior lighting
! Onl yu se cleaning agents or cleaning cloths
which ar es ui tabl ef or plastic light lenses.
Unsuitabl ec leaning agents or cleaning cloths
could scratch or damage the plastic light len-
ses. X
Clea nt he plastic lense soft he exterio rl ig hts
with aw et spong ea nd am il dc leaning agent,
e.g .M er cedes-Benz car shampo oorc leaning
cloths.
Cleanin gt he mirro rt urn signals
! Onl yu se cleaning agents or cleaning cloths
tha ta re suitabl ef or plastic lenses. Unsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lense soft he
mirror tur ns ig nals. X
Clea nt he plastic lense soft he mirror tur ns ig -
nal sint he exterio rm irror housing using aw et
spong ea nd mil dc leaning agent, e.g.Care 239
Maintenance and care Z

Mercedes-Ben zc ar shampoo or cleaning
cloths.
Cleanin gt he sensors
! If you clean the sensors with ap ower
washer, make sure that you keep ad istance
of at least 11.8 in (30 cm) between the vehicle
and the power washer nozzle. Information
about the correct distance is available from
the equipment manufacturer.
X
Clean sensors C of the driving systems with
water, car shampoo and as oft cloth.
Cleanin gt he rear view camera
! Do not clean the camera lens and the area
around the rear view camera with ap ower
washer.
X
Open the camera flap. X
Use clean water and as oft cloth to clean
camera lens C . The camera flap closes: R
if the ignition is switched off R
if the camera system is deactivated R
startin gatv ehicle speeds above 6.2 mph
(10 km/h)
Cleanin gt he exhaust pipe
G WARNING
The exhaust tail pipe and tail pipe trim can
become very hot. If you come into contact
with these parts of the vehicle, you could burn
yourself. There is ar isk of injury.
Always be particularly careful around the
exhaust tail pipe and the tail pipe trim. Allow
these components to cool down before touch-
ing them.
! Do not clean the exhaust pipe with acid-
based cleaning agents, such as bathroom
cleaner or wheel cleaner. X
Clean the exhaust pipe with ac hrome care
product tested and approved by Mercedes-
Benz.
Impurities combined with the effect sofr oad grit
and corrosive environmental factors may cause
flash rust to form on the surface. You can
restore the original shine of the exhaust pipe by
cleaning it regularly ,e specially in winter and
after washing.240
Care
Maintenance and care

Important safety notes
G WARNIN G
Eac ht ir e, includin gt he spar e( if provided),
should be checke datl east once am onth
when cold and inflated to th ep ressur er ec -
ommended by th ev ehicl em anufacturer on
th eT ir ea nd Loading Information placard on
th ed river' sd oor B-pillar or th et ir ep ressur e
label on th ei nside of th ef uel filler flap .Ify our
vehicl eh as tires of ad ifferen ts iz et ha nt he
siz ei ndicated on th eT ir ea nd Loading Infor -
mation placard or th et ir ep ressur el abel, you
should determine th ep roper tire pressur ef or
those tires .
As an added safet yf eature, your vehicl eh as
been equipped wit hat ir ep ressur em onitoring
system (TPMS) that illuminate sal ow tire pres-
sur et el ltale when on eorm or eofy our tires
are significantly underinflated. Accordingly,
when th el ow tire pressur et el ltale illuminates,
you should stop and chec ky our tires as soo n
as possible ,a nd inflat et he mtot he proper
pressure. Drivin gonas ignificantly underin-
flated tire causes th et ir etoo verheat and can
lead to tire failure. Underinflation also
reduce sf uel efficiency and tire tread life ,a nd
may affec tt he vehicle's handlin ga nd stop-
pin ga bility.
Pleas en ot et ha tt he TPM Sisn ot as ubstitut e
for proper tire maintenance ,a nd it is th ed riv -
er'
sr e sponsibilit y t om aintai nc orrect tire
pressure, eve nifu nderinflation has no t
reached th el evel to trigge ri llumination of th e
TPM Sl ow tire pressur et el ltale.
Your vehicl eh as also been equipped wit ha
TPM Sm alfunction indicator to indicat eift he
system is no to perating properly. The TPM S
malfunction indicator is combined wit ht he
low tire pressur et el ltale. When th es ystem
detects am alfunction ,t he warning lamp will
flas hf or approximately am inute and then
remain continuously illuminated. This
sequenc ew ill be repeated every time th ev ehi-
cle is started as lon gast he malfunction
exists. When th em alfunction indicator is illuminated,
th es ystem may no tbea ble to detec tors ignal
low tire pressur easi ntended. TPM Sm alfunc -
tion sm ay occur for av ariet yofr easons,
includin gt he installation of incompatible
replacemen tora lternate tires or wheels on
th ev ehicl et ha tp reven tt he TPM Sf ro mf unc-
tioning properly. Always chec kt he TPM Sm al-
function telltale after replacing on eorm or e
tires or wheels on your vehicl etoe ns ur et ha t
th er eplacemen tora lternate tires and wheels
allow th eT PM Stoc ontin ue to function prop-
erly.
It is th ed river' sr esponsibilit yt os et th et ir e
pressur etot ha tr ecommended for cold tires
whic hiss uitable for th eo perating situation
( Y
page 258). Not et ha tt he correc tt ir ep ressur e
for th ec urren to perating situation must first be
taught-in to th et ir ep ressur em onitor. If there is
as ubstantial loss of pressure, th ew arning
threshold for th ew arning message is aligned to
th er eferenc ev alue st aught-in .R estart th et ir e
pressur em onitor after adjusting th ep ressur eo f
th ec ol dt ir es ( Y
page 264). The curren tp res-
sures are saved as ne wr eferenc ev alues. As a
result ,aw arning message will appear if th et ir e
pressur ed rops sign ifica ntly.
T he tire pressur em onitor does no tw arn you of
an incorrectl ys et tire pressure. Observ et he
note sont he recommended tire pressur e
( Y
page 258).
The tire pressur em onitor is no ta ble to warn you
of as udde nl oss of pressure, e.g. if th et ir ei s
penetrated by af oreign object. In th ee vent of a
sudde nl oss of pressure, brin gt he vehicl etoa
halt by braking carefully. Avoid abrup ts te ering
movements.
The tire pressur em onitor has ay ellow warning
lamp in th ei nstrumen tc luste rf or indicating
pressur el oss or am alfunction .W hether th e
warning lamp flashes or lights up indicates
whether at ir ep ressur eist oo low or th et ir e
pressur em onitor is malfunctioning :R
if th ew arning lamp is lit continuously, th et ir e
pressur eono ne or mor et ir es is significantly
to ol ow. The tire pressur em onitor is no tm al-
functioning . R
if th ew arning lamp flashes for aroun da
minute and then remain sl it constantly, th e
tire pressur em onitor is malfunctioning .Tire pressure 263
Wheels and tires Z

must be positioned vertically, directly under
the jacking point of the vehicle.
! The jack is designed exclusively for jacking
up the vehicl eatt he jacking points. Other-
wise ,y ou rv ehicl ec ould be damaged.
Observe the following when raising the vehicle: R
To rais et he vehicle, only use the vehicle-spe-
cific jack that has been tested and approved
by Mercedes-Benz. If used incorrectly, the
jack could tip over with the vehicl er aised.R
The jack is designed only to rais ea nd hold the
vehicl ef or as hort time while aw hee lisb eing
changed. It must not be used for performing
maintenance work under the vehicle. R
Avoid changing the whee lonu phill and down-
hill slopes. R
Before raising the vehicle, secure it from roll-
ing awa ybya pplying the parking brake and
inserting whee lc hocks. Do not disengage the
parking brake whil et he vehicl eisr aised.R
The jack must be placed on af irm, flat and
non-slip surface. On al oose surface, al arge,
flat, load-bearing underlay must be used .Ona
slippery surface, an on-slip underlay must be
used ,e .g. rubber mats.R
Do not use wooden blocks or similar objects
as aj ack underlay .O therwise, the jack wil ln ot
be abl etoa chieve its load-bearing capacity
due to the restricted height. R
Make sure that the distance betwee nt he
underside of the tires and the ground does not
exceed 1.2 in (3 cm). R
Never place you rh ands and feet under the
raised vehicle. R
Do not lie under the vehicle. R
Do not start the engine when the vehicl ei s
raised. R
Do not open or close ad oor or the trunk lid
when the vehicl eisr aised.R
Make sure that no persons are present in the
vehicl ew hen the vehicl eisr aised. X
Using lug wrench C ,l oose nt he bolts on the
whee ly ou wish to change by abou to ne full
turn. Do not unscrew the bolts completely.
The jacking points are located just behind the
front whee lh ousings and just in front of the rear
whee lh ousings (arrows).
Vehicles with AMG equipment: the vehicle
has covers installed to protect the vehicl eb ody
next to the jacking points on the outer sills.
X
Fold cover D upwards.276
Changing aw heel
Wheel sa nd tires

These tires have been specially adapted for
use with the control systems, such as ABS or
ESP ®
,a nd are marked as follows:R
MO = M ercedes-Benz OriginalR
MOE = M ercedes-Benz Original Extended
(tires featuring run-flat characteristics) R
MO1 = M ercedes-Benz Original (only cer-
tain AMG tires)
Mercedes-Benz Original Extended tires may
only be used on wheels that have been spe-
cifically approved by Mercedes-Benz.
Only use tires, wheels or accessories tested
and approved by Mercedes-Benz .C ertain
characteristics, e.g. handling, vehicle noise
emissions or fuel consumption, may other-
wise be adversely affected. In addition, when
driving with al oad, tire dimension variations
could cause the tires to come into contact
with the bodywork and axle components .T his
could result in damage to the tires or the vehi-
cle.
Mercedes-Benz accepts no liability for dam-
age resulting from the use of tires, wheels or
accessories other than those tested and
approved.
Information on tires, wheels and approved
combinations can be obtained from any quali-
fied specialist workshop.
! Retreaded tires are neither tested nor rec-
ommended by Mercedes-Benz ,s ince previ-
ous damage cannot alway sbed etected on
retreaded tires. As ar esult, Mercedes-Benz
cannot guarantee vehicle safety if retreaded
tires are mounted. Do not mount used tires if
you have no information about their previous
usage.
The recommended pressures for various oper-
ating conditions can be found: R
on the Tire and Loading Information placard
on the B-pillar on the driver's side R
in the tire pressure table in the fuel filler flap
Observe the notes on recommended tire pres-
sures under various operating conditions
( Y
page 258).
Check tire pressures regularly, and only when
the tires are cold. Comply with the maintenance
recommendations of the tire manufacturer in
the vehicle document wallet. Notes on the vehicle equipment –a lway se quip
the vehicle: R
with tires of the same size on ag iven axle (left
and right) R
with the same type of tires at ag iven time
(summer tires, winter tires, MOExtended
tires)
Exception: it is permissible to install ad iffer-
ent type or make in the event of af lat tire.
Observe t he
"MOExtended tires (tires with
run-flat characteristics" section ( Y
page 242).
Vehicles equipped with MOExtended tires are
not equipped with aT IREFIT kit at the factory. It
is therefor er ecommended that you additionally
equip your vehicle with aT IREFIT kit if you mount
tires that do not feature run-flat properties, e.g.
winter tires. AT IREFIT kit may be obtained from
aq ualified specialist workshop.
Emergency spar ew heel
Important safety notes
G WARNING
The wheel or tire size as well as the tire type of
the spare wheel or emergenc ys pare wheel
and the wheel to be replaced may differ.
Mountin gane mergenc ys pare wheel may
severely impair the driving characteristics.
There is ar isk of an accident.
To avoid hazardous situations: R
adapt your driving style accordingly and
drive carefully. R
never mount more than one spare wheel or
emergenc ys pare wheel that differs in size. R
only use as pare wheel or emergenc ys pare
wheel of ad ifferent size briefly. R
do not switch ESP ®
off.R
have as pare wheel or emergenc ys pare
wheel of ad ifferent size replaced at the
nearest qualified specialist workshop.
Observe that the wheel and tire dimensions
as well as the tire type must be correct.
When using an emergenc ys pare wheel or spare
wheel of ad ifferent size, you must not exceed
the maximum speed of 50 mph (80 km/h).Emergency spar ew heel 279
Wheels and tires Z

Filling capacities The followin gv alue sr efer to an oil chang e
includin gt he oil filter.
Model Capacit y
SLC 300
6. 7USq t( 6.3 l)
Mercedes ‑ Benz
SLC 43 AMG 6.9 US qt (6.5 l)
Ad ditives
! Do not us ea ny additive sint he engine oil.
Thi sc ould damag et he engine.
Brake fluid
G WARNING
The brake fluid constantly absorb sm oisture
from the air. Thi sl owers the boiling point of
the brake fluid .Ift he boiling point of the brake
fluid is too low, vapor pockets may form in the
brake system when the brakes are applied
hard. Thi sw ould impai rb raking efficiency.
There is ar is kofana ccident.
Yo us houl dh av et he brake fluid renewe da t
the specified intervals.
Whe nh an dling brake fluid ,o bserve the impor-
tant safety notes on service products
( Y
page 284).
The brake fluid change interval sc an be found in
the Maintenance Booklet.
Only us eb rake fluid approved by Mercedes-
Benz in accordance with MB-Freigab eorM B-
Approva l3 31.0.
Information abou ta pp roved brake fluid can be
obtaine data ny qualified specialist worksho po r
on the Interne ta t
http://bevo.mercedes-benz.co m.
i Have the brake fluid regularly replaced at a
qualified specialist workshop and the replace-
ment confirmed in the Maintenance Booklet. Coolant
Importan ts afety notes
G WARNING
If antifreeze comes into contact with hot com-
ponents in the engine compartment, it may
ignite. There is ar isk of fire and injury.
Let the engine cool dow nb efore yo ua dd anti-
freeze .M ake sur et hat antifreeze is not spilled
next to the filler neck. Thoroughly clea nt he
antifreeze from components before starting
the engine.
! Only ad dc oolant that has bee np remixed
with the desire da ntifreeze protection. You
coul do therwise damag et he engine.
Furthe ri nformatio nonc oolants can be found
in the Mercedes-Benz Specifications for Ser-
vice Products, MB BeVo 310.1, e.g. on the
Internet at http://bevo.mercedes-benz.com.
Or contact aq ualifie ds pecialist workshop.
! Always use as uitabl ec oolant mixture, even
in countries where hig ht emperatures prevail.
Otherwise ,t he engine cooling system is not
sufficiently protected from corrosion and
overheating.
i Have the coolant regularly replaced at a
qualified specialist workshop and the replace-
ment confirmed in the Maintenance Booklet.
Comply with the important safety precautions
for service products whe nh andling coolant
( Y
page 284).
The coolant is am ixture of water and anti-
freeze/corrosion inhibitor. It is responsible for
the following: R
Anti-corrosion protection R
Antifreeze protection R
Raising the boiling point
If the coolant has antifreeze protection dow nt o
-35 ‡( -37 †), the boiling point of the coolant
during operation is approximatel y2 66 ‡
(130 †).Service products and filling capacities 287
Technical data Z