lights MERCEDES-BENZ SLC 2017 Owner's Guide
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2017, Model line: SLC, Model: MERCEDES-BENZ SLC 2017Pages: 294, PDF Size: 9.12 MB
Page 174 of 294
Service menu Depending on the equipment installed in the
vehicle, you have the following options in the
Serv. menu:R
Calling up display messages ( Y
page 178)R
Restarting the tire pressure loss warning sys-
tem ( Y
page 262)R
Checking the tire pressure electronically
( Y
page 262)R
Calling up the service due date
( Y
page 235)
Settings menu
Introduction Depending on the equipment installed in the
vehicle, in the Sett. menu you have the follow-
ing options: R
Changing the instrumen tc luster settings
( Y
page 172)R
Changing the light settings ( Y
page 172)R
Changing the vehicle settings ( Y
page 173)R
Changing the convenience settings
( Y
page 174)R
Restoring the factory settings ( Y
page 175)
Instrument cluster
Selecting the distance unit The Display Unit Speed-/Odometer: func-
tion allow sy ou to choose whether certain dis-
play sa ppear in kilometers or miles in the mul-
tifunction display. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Instrument Cluster submenu.X
Press v to confirm.X
Press the d or c button to select the
Display Unit Speed-/Odometer function.
The current setting km or miles appears.X
Press the v button to save the setting.
The selected unit of measurement for distance
applie st o:R
the digital speedometer in the Trip menuR
the odometer and trip odometer R
the trip computer R
the current consumption and the range R
navigation instructions in the Navi menuR
cruise control R
Distanc eP ilot DISTRONIC R
ASSYST PLUS service interval display
Selecting permanent display The Permanent Display: function allow sy ou
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Instrument Cluster submenu.X
Press v to confirm. X
Press the d or c button to select the
Permanent Display: function.
The current setting, Outside Temperature
or Speedometer [km/h] or Speedometer
[mph] ,a ppears. X
To change the setting: press v again.
Lights
Setting the daytime running lights This function is not available in Canada. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Light submenu. X
Press v to confirm. X
Press the d or c button to select the
Daytime Running Lights function.
If the Daytime Running Lights function has
been switched on, the cone of light and the
Page 176 of 294
X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Vehicle submenu.X
Press v to confirm.X
Press the d or c button to select the
Automatic Door Lock function.
When the Automatic Door Lock function is
activated, the multifunction display shows the
left-hand vehicle door in orange. X
Press the v button to save the setting.
For further information on the automatic locking
feature, see ( Y
page 69).
Activating/deactivating the acoustic
locking verification signal If you switch on the Acoustic Lock function, an
acoustic signal sounds when you lock the vehi-
cle. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Vehicle submenu.X
Press v to confirm.X
Press the d or c button to select the
Acoustic Lock function.
If the Acoustic Lock function is activated,
the 7 symbol in the multifunction display
lights up orange. X
Press the v button to save the setting.
Convenience
Activating/deactivating the EASY-
ENTRY/EXI Tf eature
G WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steerin gw heel, you and other vehicle
occupant s–p articularly children –c ould
become trapped. There is ar isk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel. If somebody becomes trapped: R
press one of the memory function position
buttons, or R
move the switch for steerin gw heel adjust-
ment in the opposite direction to that in
which the steerin gw heel is moving.
The adjustmen tp rocess is stopped. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Using d or c ,s elect the Easy Entry/
Exit function.
If the Easy Entry/Exit function is activated,
the multifunction display shows the steering
wheel in orange. X
Press the v button to save the setting.
Further information on the EASY-ENTRY/EXIT
feature ( Y
page 87).
Switching the belt adjustment on/off X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Press the d or c button to select the
Belt Adjustment function.
When the Belt Adjustment function is acti-
vated, the seat belt is displayed in orange in
the multifunction display. X
Press the v button to save the setting.
For further information on belt adjustment, see
( Y
page 41).
Switching the fold-in mirrors when lock-
ing feature on/off
This function is only availabl ew hen the vehicle is
equipped with the electrical fold-in function.
This function is only availabl einC anada.
When you activat et he Auto. Mirror Folding
function, the exterior mirrors are folded in when
the vehicle is locked.
If you have switched on the Auto. Mirror
Folding function and you fold in the exterior
mirrors using the button on the door
( Y
page 89), they will not fold out automatically.174
Menus and submenus
On-board computer and displays
Page 177 of 294
The exterior mirrors can then only be folded out
using the button on the door. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu.X
Press v to confirm.X
Press the d or c button to select the
Auto. Mirror Folding function.
If the Auto. Mirror Folding function is
switched on, the multifunction display shows
the exterior mirror in orange. X
Press the v button to save the setting.
Restoring the factor ys ettingsX
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Factory Setting submenu.X
Press v to confirm.
The Reset All Settings? function
appears. X
Press the d or c button to select No or
Yes .X
Press the v button to confirm the selec-
tion.
If you have selected Yes
and confirmed, the
multifunction display shows ac onfirmation
message.
For safety reasons, the Daytime Running
Lights function in the Light submenu is only
reset if the vehicle is stationary.
AMG menu (Mercedes-Benz SLC 43
AMG)
Warm-up
C
Digital speedometer
D
Gear indicator
Page 184 of 294
Display messages
Possible causes/consequences and P Solutions
The yellow $ warning lamp and th er ed I (US Ao nl y) or $
(Canada only) indicator lamp ligh tu p.
The electric parking brak eism alfunctioning .
To release: X
Switc ho ff th ei gnition and tur nitb ac ko n.X
Releas et he electric parking brak em anually.
or X
Releas et he electric parking brak ea utomatically ( Y
page 132).
If th ee lectric parking brak es ti ll canno tber eleased:X
Do no td rive on .X
Consult aq ualified specialist workshop .
The red I (US Ao nl y) or $ (Canada only) indicator lamp flashes
and th ey ellow $ warning lamp lights up.
The electric parking brak eism alfunctioning .
To release: X
Switc ho ff th ei gnition and tur nitb ac ko n.X
Releas et he electric parking brak em anually.
To apply : X
Switc ho ff th ei gnition and tur nitb ac ko n.X
Apply th ee lectric parking brak em anually.
If th er ed I (US Ao nl y) or $ (Canada only) indicator lamp con-
tinue stof lash: X
Do no td rive on .X
Secur et he vehicl ea gainst rollin ga way ( Y
page 275).X
Shift th et ra nsmission to position P .X
Turn th ef ront wheels toward st he curb.X
Consult aq ualified specialist workshop .182
Display messages
On-boar dc omputer an dd isplays
Page 185 of 294
Display messages
Possible causes/consequences and P Solutions
The yellow $ warning lamp lights up. The red I (US Ao nl y)
or $ (Canada only) indicator lamp flashes for about te ns econds
after th ee lectric parking brak eh as been applie dorr eleased. It then
goe so ut or remain sl it .
The electric parking brak eism alfunctioning .X
Switc ho ff th ei gnition and tur nitb ac ko n.X
Apply th ee lectric parking brake.
If it is no tp ossibl etoe ng age th ee lectric parking brake:X
Shift th et ra nsmission to position P .X
Visit aq ualified specialist workshop .
If it is no tp ossibl etor elease th ee lectric parking brake:X
Releas et he electric parking brak ea utomatically ( Y
page 132).
If th ee lectric parking brak es ti ll canno tber eleased:X
Consult aq ualified specialist workshop .
The yellow $ warning lamp lights up. If you manually apply or
release th ee lectric parking brake, th er ed I (US Ao nl y) or $
(Canada only) indicator lamp flashes .
The electric parking brak eism alfunctioning .Itisn ot possibl etoa pply
th ee lectric parking brak em anually.X
Shift th es elector lever to P ,ast he electric parking brak eisn ot
applie da utomatically. X
Visit aq ualified specialist workshop .
I (USA
only)
$ (C anada
only)
Parkin gB rake Inop‐
erativ e The yellow $ warning lamp lights up. The red I (US Ao nl y)
or $ (Canada only) indicator lamp flashes for about te ns econds
after th ee lectric parking brak eh as been applie dorr eleased. It then
goe so ut or remain sl it .
The electric parking brak eism alfunctioning ,e .g .b ecause of over-
voltag eoru ndervoltage. X
Remove th ec aus ef or th eo vervoltage or undervoltage, e.g. by
charging th eb attery or restarting th ee ng ine.X
Engage or release th ee lectric parking brake.
If it remain si mpossible to apply or release th ee lectric parking brake:X
Switc ho ff th ei gnition and tur nitb ac ko n.X
Engage or release th ee lectric parking brake.
If th ee lectric parking brak es ti ll canno tber eleased:X
Consult aq ualified specialist workshop .
If th ee lectric parking brak es ti ll canno tbea pplied:X
Visit aq ualified specialist workshop .Display messages 18 3
On-boar dc omputer an dd isplays Z
Page 186 of 294
Display messages
Possible causes/consequences and P Solutions
The yellow $ warning lamp lights up and th er ed I (US Ao nl y)
or $ (Canada only) indicator lamp flashes .
It is no tp ossibl etoa pply th ee lectric parking brak em anually.X
Shift th et ra nsmission to position P .X
Visit aq ualified specialist workshop .
' (USA
only)
M (C anada
only)
Check Brake Fluid
Level There is no te no ugh brak ef luid in th eb rak ef luid reservoir .
In addition ,t he ' (US Ao nl y) or M (Canada only) warning lamp
lights up in th ei nstrumen tc luste ra nd aw arning tone sounds.
G WARNIN G
The braking effec tm ay be impaired.
There is ar is kofana ccident.X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions. Do no tc ontinue drivin g
under any circumstances. X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Consult aq ualified specialist workshop .X
Do no ta dd brak ef luid .T his does no tc orrect th em alfunction .
& Check Brake Pad Wea r The brak ep ads/linings hav er eached their wear limit.X
Visit aq ualified specialist workshop .
S Inoperative On eorm or em ain features of th em brace system are malfunctioning .X
Hav et he mbrace system checke dataq ualified specialist work-
shop.
PRE-SAFE Inopera‐
tiv e See Operator' s
Manual Importan tf unction sofP RE-SAF E ®
hav ef ailed. Al lo th er occupant
safet ys ystems ,e .g .a ir bags ,r emain available.X
Visit aq ualified specialist workshop immediately.
Active Brake Assist
Functions Currently
Limite dS ee Opera‐
tor's Manual Active Brake Assis tist em porarily inoperative.
Possibl ec auses are: R
th er adar sensor system is temporarily inoperative, e.g. due to elec -
tromagneti cr adiation emitted by nearby TV or radi os ta tion so r
other source sofe lectromagneti cr adiationR
th es ystem is outside th eo perating temperature rangeR
th eo n-bo ar dv oltag eist oo low.
Whe nt he causes state da bov enol onger apply, th ed isplay message
disappears.
Active Brake Assis tiso perational again .
If th ed isplay message does no td isappear :X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions.X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Restart th ee ng ine.184
Display messages
On-boar dc omputer an dd isplays
Page 187 of 294
Display messages
Possible causes/consequences and P Solutions
Active Brake Assist
Functions Limite d
See Operator' sM an ‐
ual Active Brake Assis tisu navailable due to am alfunction .X
Visit aq ualified specialist workshop .
Radar Sensor s Dirty
See Operator' sM an ‐
ual The radar sensor system is malfunctioning .
Possibl ec auses are: R
Dirt on sensor sR
Heavy rain or snow R
Whe nd rivin goni nter-urban roads without traffic or infrastructure,
e.g. in desert-like area s
At least on ed rivin gs ystem or drivin gs afet ys ystem is malfunctioning
or is temporarily unavailable :R
Active Brake Assis tR
Distanc eP ilo tD ISTR ONI C
Once th ec aus eoft he problem is no longer present, th ed rivin ga nd
drive safet ys ystems will be available again .T he display message dis-
appears.
If th ed isplay message does no td isappear :X
Pull ove ra nd stop th ev ehicl es afely as soo nasp ossible, payin g
attention to roa da nd traffic conditions.X
Secur et he vehicl ea gainst rollin ga way ( Y
page 131).X
Switc ho ff th ee ng ine.X
Clean all sensor s( Y
page 240).X
Restart th ee ng ine.
The display message disappears.
u SRS Malfunction Ser ‐
vic eR equired The restrain ts ystem is malfunctioning .T he u warning lamp also
lights up in th ei nstrumen tc luster.
G WARNIN G
The air bags or Emergency Tensioning Devices may either be triggered
unintentionally or, in th ee vent of an accident, may no tbet ri ggered .
There is an increased ris kofi njury.X
Visit aq ualified specialist workshop immediately.
Fo rf urther information about th er estrain ts ystem, see ( Y
page 37) .
u Front Lef tM alfunc‐
tio nS ervic e
Required or Fr on t
Right Malfunction
Servic eR equired The restrain ts ystem has malfunctioned at th ef ront on th el ef torr ight .
The u warning lamp also lights up in th ei nstrumen tc luster.
G WARNIN G
The air bags or Emergency Tensioning Devices may either be triggered
unintentionally or, in th ee vent of an accident, may no tbet ri ggered .
There is an increased ris kofi njury.X
Visit aq ualified specialist workshop immediately. Display messages 18 5
On-boar dc omputer an dd isplays Z
Page 188 of 294
Display messages
Possible causes/consequences and P Solutions
u Lef tS id eC urtai n
Airbag Malfunction
Servic e
Required or Ri gh t
Sid e Curtai n Airbag
Malfunction Servic e
Required There is am alfunction in th el eft-han da nd/o rr ight-hand head bag.
The u warning lamp also lights up in th ei nstrumen tc luster.
G WARNIN G
The lef torr ight head bag may either be triggered unintentionally or, in
th ee vent of an accident, may no tbet ri ggered .
There is an increased ris kofi njury.X
Visit aq ualified specialist workshop immediately.186
Display messages
On-boar dc omputer an dd isplays
Page 191 of 294
Display messages
Possible causes/consequences and P Solutions
lamp remain sl it or goe so ut depend sonh ow OCS classifies th eo cc u-
pant.
If th ec onditi on sa re no tf ulfilled ,t he system is no to perating correctly.X
Visit aq ualified specialist workshop immediately.
Observ et he additional information on OCS ( Y
page 45).
Lights Display messages
Possible causes/consequences and P Solutions
I Check Lef t Low Bea m
(Example) The correspondin gb ulb is faulty.X
Visit aq ualified specialist workshop .
or X
Chec kw hether you are permitte dtor eplace th eb ulb yourself
( Y
page 97).
LE Dl igh ts ources: th ed isplay message for th ec orre spondin gl amp
only appear sw hen all th eL ED sint he lamp hav ef ailed.
I Active Headlamps
Inoperative The active ligh tf unction is faulty.X
Visit aq ualified specialist workshop .
I Malfunction See
Operator' sM anual The exterio rl ighting is malfunctioning .X
Visit aq ualified specialist workshop .
I Aut oL am pF unction
Inoperative The ligh ts ensor is defective. X
Visit aq ualified specialist workshop .
I Switch Off Lights The lights are still switched on when you leav et he vehicle. Aw arning
tone also sounds. X
Turn th el igh ts witch to position X .
Adaptive Highbeam
Assist Currently
Unavailable See
Operator' sM anual Adaptive Highbea mA ss is tisd eactivated and temporarily inoperative.
Possibl ec auses are: R
th ew indshield in th ec amera' sf ield of vision is dirtyR
visibilit yisi mpaire dd ue to heav yr ain ,s no worf ogX
Clean th ew indshield.
If th es ystem detects that th ec amera is full yo perational again ,t he
Adaptive Highbeam Assist Now Available message is displayed.
Adaptive Highbea mA ss is tiso perational again .
Adaptive Highbeam
Assist Inoperative Adaptive Highbea mA ss is tisf aulty.X
Visit aq ualified specialist workshop .Display messages 18 9
On-boar dc omputer an dd isplays Z
Page 213 of 294
General notes The multimedia system section in this manual
describes the basi cp rinciples for operation.
More information can be found in the Digital
Operator's Manual.
Important safety notes
G WARNING
If you operate information systems and com-
municatio ne quipment integrated in the vehi-
cle whil ed riving, you wil lbed istracted from
traffic conditions. You could also lose control
of the vehicle .T here is ar isk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the lega lr equirements for the
country in which you are currently driving when
operating the multimedia system.
The multimedia system calculates the route to
the destination withou tt aking the following into
account, for example: R
traffic lights R
stop and yield signs R
parking or stopping restrictions R
road narrowing R
other road and traffic rule sa nd regulations
The multimedia system may give incorrect nav-
igation recommendations if the actual street/
traffic situation does not correspond with the
digital map's data.
For example: R
ad iverted route R
the road layout or the direction of ao ne-way
street has been changed
For this reason, you must alway so bserve road
and traffic rule sa nd regulations during your
journey. Roa da nd traffic rule sa nd regulations
alway sh ave priority over multimedia system
driving recommendations.
Navigation announcements are intended to
direct you whil ed riving withou td iverting your
attention from the road and driving. Please alway su se this feature instead of con-
sulting the map display for directions. Looking
at the icons or map display can distract you from
traffic conditions and driving, and increase the
risk of an accident.
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled equip-
ment and meets the FCC radi of requency (RF)
Exposure Guidelines in Supplement CtoO ET65.
This equipment has very low level sofRFe nergy
that is deeme dtoc omply withou tm aximum
permissive exposure evaluation (MPE). How-
ever, it is recommended to insta ll it at ad ista
nce
of at least 8i nches (approx. 20 cm) betwee nt he
radiation source and ap erson's body (not
including limb ss uch as hands, wrists, feet and
legs).
G WARNING
Modifications to electronic components, their
software as wel lasw iring can impair their
function and/or the function of other net-
worked components. In particular, systems
relevant to safety could also be affected. As a
result, these may no longer function as inten-
ded and/or jeopardize the operating safety of
the vehicle .T here is an increase dr isk of an
accident and injury.
Never tamper with the wiring as wel lase lec-
tronic components or their software .Y ou
shoul dh ave all work to electrica la nd elec-
tronic equipment carried out at aq ualified
specialist workshop.
If you make any changes to the vehicle elec-
tronics, the general operating permit is ren-
dered invalid.
Function restrictions
For safety reasons, some functions are restric-
ted or unavailable whil et he vehicle is in motion.
You wil ln otice this, for example, because either
you wil ln ot be abl etos elect certain menu items
or am essag ew il la ppear to this effect.Function restrictions 211
Multimedia system Z