mirror MERCEDES-BENZ SLC 2018 User Guide

Using the memory button
You can set the front-passenger side exterior
mirror such that you can see the rear wheel on
that side as soon as you engage reverse gear.
This setting can be stored using memor yb utton
M

via the Mercede smec onnect web app .N ever
leave children unsupervise dint he vehicle.
The memory function can be activated at any
time, e.g. even when the SmartKey is not in the
ignitio nl ock.
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as as ingle
memory preset: R
position of the seat, backrest and head
restraint R
driver' ss ide :s teering whee lp ositionR
driver' ss ide :p osition of the exterior mirrors
on the driver' sa nd front-passenge rs ides
X
Adjust the seat electrically ( Y
pag e8 6).X
On the driver' ss ide ,a djust the steering wheel
( Y
pag e8 9) and the exterior mirrors
( Y
pag e9 1).X
Press memory button M and one of the stor-
age position buttons 1 , 2 or 3 withi nt hree
seconds.
The settings are stored in the selected preset
position. At one sounds when the settings
have been completed. Calling up as tored setting X
Press and hold the relevant storage position
button 1 , 2 or 3 until the seat, steering wheel
and exterior mirrors are in the stored position.
i The setting procedure is interrupted as soon
as you release the storage position button.94
Memory function
Seats, steering wheel and mirrors

Depending on your distance fro mt he parking
space ,t he Please Drive Backward mes-
sage will appear in the multifunctio nd isplay .X
If necessary ,r evers et owards the parking
space .T hi sisi ndicated by an arrow pointing
backwards.
Continu eb ac king up unti ly ou hear at one.
Stop –t he stop positio nh as been reached.
The arrow is white.
The Please Steer Wheel to the Right or
Please Steer Wheel to the Left mes-
sage appear sint he multifunctio nd isplay .
Backin gupi nt ot he parking space
X
Whil et he vehicl eiss tationary, tur nt he steer-
ing whee lint he specifie dd ir ection unti lt he
arrow is white and aw ar ning tone sounds.X
To bac kupi nt oap arking space: maintain
the steerin gw heel angle and back up care-
fully. X
Stop as soo na sy ou hear aw ar ning tone,
The vehicl eh as reache dt he positio ninw hi ch
yo un ee dtoc ountersteer.
The Please Steer Wheel to the Right or
Please Steer Wheel to the Left mes-
sage appear sint he multifunctio nd isplay .X
To countersteer: whil et he vehicl eiss tation-
ary, tur nt he steerin gw heel in the specified
direction unti lt he arrow is white and aw ar n-
ing tone sounds. X
To bac kupi nt oap arking space: maintain
the steerin gw heel angle and back up care-
fully. X
Stop as soo na sy ou hear aw ar ning tone ,S top
as soo na sP ar kin gA ssist PARKTRONIC
sounds the continuous warning tone ,ifn ot
before.
The Parking Guidance Finished message
appear sint he multifunctio nd isplay and a
tone sounds .Y ou ma ybea sk ed to stee rina different direction and the nc hange gear .I n
thi sc ase, furthe rd isplay sint he multifunction
displa yw il ld ir ect yo utot he fina lp osit ion.X
Maneuver if necessary. X
Alway so bs erve the warning message sd is -
played by Parkin gA ssist PARKTRONIC
( Y
page 151).
Cancelin gP arking Guidance X
Press the PARKTRONI Cb ut ton on the center
consol e( Y
page 151).
Parkin gG uida nce is immediatel yc anceled
and Parkin gA ssist PARKTRONI Ciss wi tched
off.
Parkin gG uida nce is canceled automaticall yifi t
is no longe rp os sibl etog uide yo ui nto the park-
ing space ,orifam al functio no ccurs.
The parkin gs pa ce symbo lg oe so ut and aw ar n-
ing tone sounds.
Rea rv ie wc am era
General notes
Rear vie wc amera C is an optica lp ar kin ga nd
maneuvering aid. It shows the area behind your
vehicl ew it hg uide lines in the multimedia sys-
tem.
The area behind the vehicl eisd isplayed as a
mirror image ,asint he rea rv ie wm irror.
i The text shown in the multimedia system
displa yd epen ds on the languag es etting. The
following ar ee xamples of rea rv ie wc amera
displays in the multimedia system.154
Driving system s
Dr ivi ng an dp arking

Use the guidelines only for orientation.
Approach objects no further than the bottom-
most guideline.
C
Yello wg uide line at ad istance of approx-
imately 13 ft (4.0 m) from the rear of the
vehicleD
White guide line without steering input –
vehicle width including the exterior mirrors
(static)

Blind Spot Assist monitors the are aupto10f t
(3.0 m) behind your vehicle and directly nex tt o
your vehicle, as shown in the diagram. For this
purpose, Blind Spot Assist uses radar sensor si n
the rear bumper.
If the lanes are narrow, vehicles driving in the
lane beyond the lane nex ttoy our vehicle may be
indicated, especially if the vehicles are not driv-
ing in the middle of their lane. This may be the
case if ther ea re vehicles driving at the inner
edge of their lanes.
Due to the natur eoft he system:R
warning sm ay be issued in error when driving
close to crash barriers or similar solid lane
borders. R
warning sm ay be interrupted when driving
alongside long vehicles, e.g. trucks, for ap ro-
longed time.
Indicator and warning display
C
Yellow indicator lamp/red warning lamp Blind Spot Assist is not activ eats peeds below
approximately 20 mph (30 km/h). Vehicles in
the monitoring range are then not indicated.
When Blind Spot Assist is activated, indicator
lamp C in the exterior mirror sl ights up yellow
at speeds of up to 20 mph (3 0k m/ h) .Ats peeds
above 20 mph (30 km/h), the indicator lamp
goe so ut and Blind Spot Assist is operational.
If av ehicl eisd etected within the blind spot
monitoring rang eats peeds above 20 mph
(30 km/h), warning lamp C on the correspond-
ing sid el ig hts up red .T hi sw ar ning is always
emitted when av ehicl ee nter st he blind spot
monitoring rang ef rom behind or from the side.
Whe ny ou overtake av ehicle, the warning only
occurs if the difference in speed is less than
7m ph (12 km/h).
The yellow indicator lamp goe so ut if reverse
gea rise ngaged .Int his event, Blind Spot Assist
is no longer active.
The brightness of the indicator/warning lamps
is adjuste da ut omaticall ya ccording to the ambi-
ent light.
Collisio nw arningIf av ehicl eisd etected in the monitoring rang eo f
Blind Spot Assist and yo us witch on the corre-
sponding turn signal ,ad oubl ew ar ning tone
sounds. Re dw ar ning lamp C flashes. If the turn
signal remains on, vehicles detected are indica-
ted by the flashing of red warning lamp C .
There are no further warning tones.
Switchin gonB lind Spo tA ssis tX
Make sure that Blind Spot Assist
( Y
page 171 )i sa ctivate dint he on-board
computer. X
Turn the SmartKey to position H in the igni-
tion lock.
Warning lamps C in the exterio rm irrors light
up red for approximately 1.5 seconds and
then turn yellow.160
Driving systems
Driving and parking

X
Press the d or c button to select the
Automatic Door Lock function.
When the Automatic Door Lock function is
activated, the multifunction display shows the
left-hand vehicle door in orange. X
Press the v button to save the setting.
For further information on the automatic locking
feature, see ( Y
page 71).
Activating/deactivating the acoustic
locking verification signal If you switch on the Acoustic Lock function, an
acoustic signal sounds when you lock the vehi-
cle. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Vehicle submenu.X
Press v to confirm.X
Press the d or c button to select the
Acoustic Lock function.
If the Acoustic Lock function is activated,
the 7 symbol in the multifunction display
lights up orange. X
Press the v button to save the setting.
Comfort
Activating/deactivating the EASY-
ENTRY/EXI Tf eature
G WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steerin gw heel, you and other vehicle
occupant s–p articularly children –c ould
become trapped. There is ar isk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel.
If somebody becomes trapped: R
press one of the memory function position
buttons, or R
move the switch for steerin gw heel adjust-
ment in the opposite direction to that in
which the steerin gw heel is moving.
The adjustmen tp rocess is stopped. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Using d or c ,s elect the Easy Entry/
Exit function.
If the Easy Entry/Exit function is activated,
the multifunction display shows the steering
wheel in orange. X
Press the v button to save the setting.
Further information on the EASY-ENTRY/EXIT
feature ( Y
page 89).
Switching the seat belt adjustment on/off X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Press the d or c button to select the
Belt Adjustment function.
When the Belt Adjustment function is acti-
vated, the seat belt is displayed in orange in
the multifunction display. X
Press the v button to save the setting.
For further information on belt adjustment, see
( Y
page 42).
Switching the fold-in mirrors when lock-
ing feature on/off This function is only availabl ew hen the vehicle is
equipped with the electrical fold-in function.
This function is only availabl einC anada.
When you activat et he Auto. Mirror Folding
function, the exterior mirrors are folded in when
the vehicle is locked.
If you have switched on the Auto. Mirror
Folding function and you fold in the exterior
mirrors using the button on the door
( Y
page 91), they will not fold out automatically.
The exterior mirrors can then only be folded out
using the button on the door. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm.174
Menus and submenus
On-board computer and displays

X
Press the d or c button to select the
Auto. Mirror Folding function.
If the Auto. Mirror Folding function is
switched on, the multifunction display shows
the exterior mirror in orange. X
Press the v button to save the setting.
Restoring the factor ys ettingsX
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Factory Setting submenu.X
Press v to confirm.
The Reset All Settings? function
appears. X
Press the d or c button to select No or
Yes .X
Press the v button to confirm the selec-
tion.
If you have selected Yes
and confirmed, the
multifunction display shows ac onfirmation
message.
For safety reasons, the Daytime Running
Lights function in the Lights submenu is only
reset if the vehicle is stationary.
AMG menu (Mercedes-AMG SLC 43)
Warm-up
C
Digital speedometer
D
Gear indicator

sage appears, follow the customer service
representative's instructions.
The message in the displa yd isappears.
If you select Cancel the remote malfunction
diagnosis is canceled completely.
The vehicle operating state check begins. You
will see the Vehicle diagnosis activated
message.
When the diagnosis is completed, the Trans‐
fer vehicle diagnostics data (Voice
connection may be interrupted during
data transfer) message appears. The vehicle
data can now be sent to the Customer Assis-
tance center. X
Press OK to confirm the message.
The voice connection with the Customer
Assistance Center is terminated.
You will see the Vehicle diagnosis:
Transferring data... message.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice connec-
tion is re-established after the transfer is com-
plete. If necessary, you will be contacted at a
later time by another means, e.g. by e-mail or
phone.
Another function of the Vehicle Health Check is
the transfer of service data to the Customer
Assistance Center. If as ervice is overdue, the
COMAND displa ys hows am essage about vari-
ous special offers at your workshop.
USA only: this information can also be called up
under "Owners Online" at http://
www.mbusa.com.
Information on the data stored in the vehicle
( Y
page 28).
Information on Roadside Assistance
( Y
page 25).
Garage door opener
General notes
The HomeLink ®
garage door opener integrated
in the rear-view mirror allow sy ou to operate up
to three different door and gate systems.
Use the integrated garage door opener only on
garage doors that: R
have safety stop and reverse features and R
meet current U.S. federal safety standards Once programed, the integrated garage door
opener in the rear-view mirror will assume the
function of the garage door system's remote
control. Please also read the operating instruc-
tions for the garage door system.
When programming ag arage door opener, park
the vehicle outside the garage. Do not run the
engine while programming.
Certain garage door drives are incompatible
with the integrated garage door opener. If you
have difficulty programing the integrated garage
door opener, contact an authorized Mercedes-
Benz Center.
Alternatively, you can call the following tele-
phone assistance services: R
USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes R
Canada: Customer Service at
1-800-387-0100 R
HomeLink ®
hotline 1-800-355-3515 (free of
charge)
More information on HomeLink ®
and/or com-
patible products is also available online at
http://www.homelink.com.
Notes on the declaration of conformity
( Y
page 26).
USA: FCC ID: CB2HMIHL4
Canada :I C: 279B-HMIHL4
Important safety notes
G WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is ar isk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G WARNING
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
these exhaust gases leads to poisoning. There
is ar isk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.228
Features
Stowage and features

Alway ss wi tch off the windshield wipers and
the ignition before cleaning the windshield.
! Do not pull the wipe rb lade .O therwise, the
wipe rb lade could be damaged.
! Do not clean wipe rb lade st oo ofte na nd do
not ru bt hem too hard. Otherwise, the graph-
ite coating could be damaged .T hi sc ould
cause wipe rn oise.
! Hol dt he wipe ra rm securel yw he nf olding
back. The windshield could be damaged if the
wipe ra rm smacks against it suddenly.X
Fol dt he windshield wipe ra rm sa wa yf rom the
windshield. X
Carefully clean the wipe rb lade sw it had am p
cloth. X
Fol dt he windshield wipe ra rm sb ac ka gain
before switching on the ignition.
Cleanin gt he exterior lighting
! Onl yu se cleaning agents or cleaning cloths
which ar es ui tabl ef or plastic light lenses.
Unsuitabl ec leaning agents or cleaning cloths
could scratch or damage the plastic light len-
ses. X
Clea nt he plastic lenses of the exterio rl ig hts
with aw et sponge and am il dc leaning agent,
e.g .M ercedes-Benz car shampo oorc leaning
cloths.
Cleanin gt he mirro rt urn signals
! Onl yu se cleaning agents or cleaning cloths
tha ta re suitabl ef or plastic lenses .U nsuitable
cleaning agents or cleaning cloths could
scratch or damage the plastic lenses of the
mirror turn signals. X
Clea nt he plastic lenses of the mirror turn sig-
nal sint he exterio rm irror housing using aw et
sponge and mil dc leaning agent, e.g.
Mercedes-Benz car shampo oorw it hc leaning
cloths.
Cleanin gt he sensors
! If yo uc lean the sensors with ap ower
washer, make sure tha ty ou kee pad is tance
of at leas t1 1.8 in (30 cm )b et ween the vehicle
and the powe rw as he rn ozzle. Information abou tt he correct distance is availabl ef rom
the equipment manufacturer.
X
Clea ns ensors C of the driving system sw it h
water, car shampo oa nd as of tc loth.
Cleanin gt he rear view camera
! Do not clean the camera lens and the area
around the rea rv ie wc amera with ap ower
washer.
X
Ope nt he camera fla p( Y
page 155).X
Use clean water and as of tc loth to clean
camera lens C .
The camera fla pc loses: R
if the ignition is switched off R
if the camera system is deactivated R
starting at vehicl es peed sa bo ve 6.2 mph
(10 km/h)242
Care
Maintenance and care

rubbish. They must be col-
lected separately and dis-
posed of in an environmen-
tall yr esponsible recycling
system.
Dispose of batterie sina n
environmentally responsi-
ble manner. Take dis-
charge db atterie stoaq uali-
fied specialist workshop or
to ac ollection point for
used batteries.
! Have the battery checked regularl yata
qualified specialist workshop.
Observe the service interval sint he Mainte-
nance Booklet or contact aq ualified specialist
workshop for more information.
! Always have work on batterie sc arrie do ut at
aq ualified specialist workshop.
Shoul di t, in exceptiona lc ircumstances, be
absolutel yn ecessary to disconnect the 12-
volt battery yourself, please observe the fol-
lowing: R
Secure the vehicl etop revent it from rolling
away. R
Switch off the ignition. R
Disconnect the negative terminal first and
then the positive terminal.
The transmission is locked in position ]
after disconnecting the battery.
After the work has been done, install the bat-
tery and replace the cover of the positive ter-
minal clamp firmly.
Comply with safety precautions and take pro-
tective measures when handling batteries.
Ris kofe xplosion.
Fire, open flame sa nd smoking are
prohibited when handling the bat-
tery. Avoid creating sparks.
Battery acid is caustic. Avoid contact
with skin, eye sorc lothing.
Wea rs uitable protective clothing,
especially gloves, apro na nd face-
guard. Rinse any acid spills immediately
with clea rw ater. Contact ap hysician
if necessary.
Wea re ye protection.
Keep children away.
Observe this Operator's Manual.
For safety reasons, Mercedes-Benz recom-
mends that you only use batterie sw hich have
been tested and approved for you rv ehicl eb y
Mercedes-Benz. These batterie sp rovide
increase di mpact protection to prevent vehicle
occupants from suffering acid burns should the
battery be damaged in the event of an accident.
In order for the battery to achieve the maximum
possible service life ,itm ust alway sbes uffi-
ciently charged.
Like other batteries, the vehicl eb attery may
discharge over time if you do not use the vehicle.
In this case, have the battery disconnected at a
qualified specialist workshop .Y ou can also
charge the battery with ac harge rr ecommended
by Mercedes-Benz. Contact aq ualified special-
ist workshop for further information.
Have the battery condition of charge checked
more frequently if you use the vehicl em ainl yf or
short trips or if you leave it standing idl ef or a
lengthy period. Consult aq ualified specialist
workshop if you wis htol eave you rv ehicle
parked for al ong perio doft ime.
Remove the SmartKey if you park the vehicle
and do not require any electrica lc onsumers.
The vehicl ew il lt hen use very little energy ,t hus
conserving battery power.
If the powe rs upply has been interrupted ,e .g. if
you reconnect the battery ,y ou wil lh ave to:R
reset the function for automatically folding
the exterior mirrors in/out by folding the mir-
rors out once ( Y
pag e9 1)R
set the clock
On vehicles with am ultimedia system, the
time is set automatically.252
Battery (vehicle)
Breakdown assistance