jump cable MERCEDES-BENZ SLC-Class 2017 R172 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2017, Model line: SLC-Class, Model: MERCEDES-BENZ SLC-Class 2017 R172Pages: 294, PDF Size: 7.28 MB
Page 248 of 294
XPull the tire sealant bottle out of the tire infla-
tion compressor.
The filler hose remains attached to the tire
sealant bottle.
XDrive to the nearest qualified specialist work-
shop and have the tire changed there.
XHave the tire sealant bottle and the filler hosereplaced as soon as possible at aqualified
specialist workshop.
XHave the tire sealant bottle replaced every
four years at aqualified specialist workshop.
Battery (vehicle)
Important safety notes
Special tools and expert knowledge are required
when working on the battery, e.g. removal and
installation .You should therefore have all work
involvin gthe battery carried out at aqualified
specialist workshop.
GWARNING
Work carried out incorrectly on the battery
can lead, for example, to ashort circuit and
thus damage the vehicle electronics. This can
lead to function restriction sapplying to
safety-relevant systems, e.g the lighting sys-
tem, the ABS (anti-loc kbraking system) or the
ESP
®(Electronic Stability Program). The oper-
ating safety of your vehicle may be restricted.
You could lose control of the vehicle, for
example:
Rwhen braking
Rin the event of abrupt steerin gmaneuvers
and/or when the vehicle's speed is not
adapted to the road conditions
There is arisk of an accident.
In the event of ashort circuit or asimilar inci-
dent, contact aqualified specialist workshop
immediately. Do not drive any further .You
should have all work involvin gthe battery car-
ried out at aqualified specialist workshop.
For further information about ABS and ESP
®,
see (Ypage 55) and (Ypage 58).
GWARNING
Electrostatic build-up can lead to the creation of sparks, which could ignite the highly explo-
sive gases of abattery. There is arisk of an
explosion.
Before handling the battery, touch the vehicle
body to remove any existin gelectrostatic
build-up.
The highly flammable gas mixture forms when
charging the battery as well as when jump-start-
ing.
Always make sure that neither you nor the bat-
tery is electrostatically charged. Abuild-up of
electrostatic charge can be caused, for exam-
ple:
Rby wearing clothin gmade from synthetic
fibers
Rdue to friction between clothin gand seats
Rif you push or pull the battery across the car-
pet or other synthetic materials
Rif you wipe the battery with acloth
GWARNING
During the charging process, abattery produ-
ces hydrogen gas. If ashort circuit occurs or
sparks are created, the hydrogen gas can
ignite. There is arisk of an explosion.
RMake sure that the positive terminal of a
connected battery does not come into con-
tact with vehicle parts.
RNever place metal object sortools on abat-
tery.
RIt is importan tthat you observe the descri-
bed order of the battery terminals when
connectin gand disconnectin gabattery.
RWhen jump-starting, make sure that the
battery poles with identical polarity are
connected.
RIt is particularly importan ttoobserve the
described order when connectin gand dis-
connectin gthe jumper cables.
RNever connect or disconnect the battery
terminals while the engine is running.
GWARNING
Battery acid is caustic. There is arisk of injury.
246Battery (vehicle)
Breakdown assistance
Page 251 of 294
Jump-starting
For the jump-starting procedure, use only the jump-starting connection point in the engine com-
partment,consisting of apositive terminal and aground point.
GWARNING
Battery acid is caustic. There is arisk of injury.
Avoid contact with skin, eyes or clothing. Do not inhale any battery gases. Do not lean over the
battery. Keep children away from batteries. Wash away battery acid immediately with plenty of
clean water and seek medical attention.
GWARNING
During charging and jump-starting, explosive gases can escape from the battery. There is arisk
of an explosion.
Particularly avoid fire, open flames, creating sparks and smoking. Ensure there is sufficient ven-
tilation while charging and jump-starting. Do not lean over abattery.
GWARNING
During the charging process, abattery produces hydrogen gas. If ashort circuit occurs or sparks
are created, the hydrogen gas can ignite. There is arisk of an explosion.
RMake sure that the positive terminal of aconnected battery does not come into contact with
vehicle parts.
RNever place metal objects or tools on abattery.
RIt is important that you observe the described order of the battery terminals when connecting
and disconnecting abattery.
RWhen jump-starting, make sure that the battery poles with identical polarity are connected.
RIt is particularly important to observe the described order when connecting and disconnecting
the jumper cables.
RNever connect or disconnectt he battery terminals while the engine is running.
GWARNING
Ad ischarged battery can freeze at temperatures below freezing point. When jump-starting the
vehicle or charging the battery, gases can escape from the battery. There is arisk of an explosion.
Allow the frozen battery to thaw out before charging it or jump-starting.
!Avoid repeated and lengthy starting attempts. Otherwise, the catalytic converter could be
damaged by the non-combusted fuel.
If the indicator/warning lamps do not light up at low temperatures, it is very likely that the dis-
charged battery has frozen.Int his case, you may neither charge the battery nor jump-start the
vehicle. The service life of athawed-out battery may be shorter. The starting characteristicsc an be
impaired, particularly at low temperatures. Have the thawed-out battery checked at aqualified
specialist workshop.
Jump-starting249
Breakdown assistance
Z
Page 252 of 294
Do not start the vehicleusing arapid charging device. If your vehicle's battery is discharged, the
engine can be jump-started froma nothervehicleorf romas econd battery using jumpe rcables.
Observe the following points:
RThe battery is not accessible in al lvehicles. If the othe rvehicle's battery is not accessible ,jump-
start the vehicl eusing asecond battery or ajump-starting device.
RYo um ayonl yjump-star tthe vehicl ewhent he engine and exhaust system ar ecold.
RDo not start the engine if the battery is frozen. Let the battery thawf irst.
ROnlyjump-star tfromb atteries with a12Vvoltagerating.
ROnlyu sejumpe rcable swhich have asufficient cross-sectio nand insulate dtermina lclamps.
RIf the battery is full ydischarged, leav ethe battery thati sbeing used to jump-star tconnected for
af ew minute sbefor ea ttempting to start. Thi scharge sthe battery slightly.
RMake sure thatt he two vehicles do not touch.
Make sure that:
RThe jumpe rcable sarenot damaged.
RBar eparts of the termina lclamp do not come into contact with othe rmeta lparts whil ethe jumper
cable sareconnected to the battery.
RThe jumpe rcable scanno tcome into contact with parts which can mov ewhent he engine is
running ,suc hast he V-bel tpulle yort he fan.
XSecure the vehicl ebyapplyingthe electri cparkin gb rake.
XShift the transmission to position P.
XMake sure thatt he ignition is switched off .All indicator lamps in the instrument cluster must be
off .W henu sing the SmartKey, tur nthe SmartKeytop osition0in the ignition lock and remove it
(
Ypage 115).
XSwitch off al lelectrical consumers ,e.g.r ea rw indo wd efroster ,lighting, etc.
XOpen the hood.
Positio nnumber Bidentifie sthe charge dbattery of the othe rvehicl eorane quivalen tjump-starting
device.
XSlide cover :of positive terminal ;in the direction of the arrow.
XConnect positive terminal ;on your vehicl etopositive terminal =of donor battery Busing the
jumpe rcable ,alway sbegin with positive terminal ;on your ow nvehicl efirst.
XStar tthe engine of the donor vehicl eand runitati dlingspeed.
250Jump-starting
Breakdow nassistance
Page 253 of 294
XConnect negative terminal?of donor battery Bto ground point Aof your vehicle usingt he
jumper cable, connecting th ejumper cabl etobattery of other vehicle Bfirst.
XStart th eengine.
XBefore disconnecting th ejumper cables, let th eenginer un for several minutes.
XFirst,r emove th ejumper cables from ground point Aand negative terminal ?,thenf romp os-
itive clamp ;and positiv etermi nal=.B egineach tim eatthecontact sonyour own vehicle first.
XClose cover :of positiv etermi nal;after rem ovingthe jumper cables.
XHav ethe battery checked at aqualified specialist workshop.
Jump-starting isno tc onsid ered to beanorma loperatin gcondition.
iJumpe rcables and further informatio nregardin gjump-startin gcan be obtaine datanyqualif ied
specialist workshop.
Towingand tow-starting
Important safety notes
GWAR NING
When to wingor tow-startin ganother veh icle
and its weightisg reatertha nt he permis sible
gross weightofy our vehicle,the :
Rthet ow ing eye could detach itself
Rthev ehicle/t railercom binatio ncouldroll-
over.
Thereisar iskofana cciden t.
When to wingor tow-startin ganother veh icle,
its weights hould notbegreatertha nt he per-
mis sible gross weightofy our vehicle.
Detail sonthepermis siblegross veh icleweight
of your veh iclecan befoun dont heveh icle iden -
tification plate(
Ypage 283).
!When Activ eBrake Assist,D istance Pilot
DI ST RONICort heHOLD function are activa-
te d, thev ehicle brakes automaticall yincer-
tain situations.
To avoid damag etotheveh icle,deactivate
these systems inthef ollowin gors imilar sit-
uations:
Rwhen towing th evehicle
Rinthec ar wash
!Only secure th etow ropeort owbar at the
to wing eyes. Otherwise, th evehicle could be
damaged.
!Do no tuse th etow ing eye for recovery, th is
could damag ethe veh icle.Ifind oubt,recover
th ev ehicle withac rane.
!When to wing,pull away slowlya nd
smoothly. Ifth et ractive power is to ohigh,t he
vehicle scould be damaged.
!Do no ttow withsling-type equipment. This
could damag ethe vehicle.
!When to wingvehicle swithK EYLESS-GO,
use th ekeyins tead of th eStart/S topb utton.
Otherwise, th eautomat ictransmission may
shifttop ositionPwhen th edriver' sorf ront-
passenger door are opened, whichcould lead
to damag etothetransmission.
!Makes ure that th eelectr icparking brakei s
released. If th eelectr icparking brak eisfaulty,
vis itaq ualified specialist workshop.
!The vehicle can betowed amaximum of
30 mile s(50km). The towing speedof30m ph
(50 km/h) must no tbeexceeded.
If th evehicle has to be towed mor ethan
30 mile s(50km) ,the entire vehicl emustb e
raised and transported.
!If you to wortow-star tanother vehicle ,its
weightm ust notexceed th emaximum per-
missible gross vehicle weightofy our vehicle.
It is bette rtohave th evehicle transported than
to have it towed away.
The automatic transmission must be in position
N when th evehicle is beingt owed.
The battery must be connecte dand charged.
Otherwise, you:
Rcanno tturnt he SmartKey to position 2in the
ignition lock.
Rcanno tshiftt heautomatic transmission to
position N.
Disarm th eautomatic lockin gfeature before the
vehicle is towed (
Ypage 173). You coul dother-
Towing and tow-starting251
Breakdown assistance
Z
Page 255 of 294
!Vehicles with automatic transmission must
not be towed with the rear axle raised. The
vehicle/trailer combination may otherwise
swerve or even roll over.
Transporting the vehicle
Vehiclesw ith automatic transmission
!When the vehicle is loadedf or transport, the
front and rear axles must be stationary and on
the same transportation vehicle. Positioning
over the connection point of the transport
vehicle is not permitted. The drive train may
otherwise be damaged.
All vehicles
!You may only secure the vehicle by the
wheels, not by parts of the vehicle such as
axle or steering components. Otherwise, the
vehicle could be damaged.
The towing eye can be used to pull the vehicle
onto atrailer or transporter for transporting pur-
poses.
XTurn the SmartKey to position 2in the ignition
lock.
XShift the transmission to position N.
As soon as the vehicleh as been loaded:
XPrevent the vehicle from rolling awayb y
applying the electric parking brake.
XShift the transmission to position P.
XTurn the SmartKey in the ignition lock to posi-
tion0and remove the SmartKey from the
ignition lock.
XSecure the vehicle.
Tow-starting (emergencye ngine
starting)
!
Vehicles with automatic transmission must
not be tow-started. You could otherwise dam-
age the automatic transmission.
You can find information on "Jump-starting" at
(
Ypage 249).
Fuses
Important safety notes
GWARNING
If you manipulate or bridge afaulty fuse or if
you replace it with afuse with ahigher amper-
age, the electric cables could be overloaded.
This could result in afire. There is arisk of an
accident and injury.
Alwaysr eplace faulty fuses with the specified
new fuses having the correct amperage.
Blown fuses must be replaced with fuses of the
same rating, which you can recognize by the
color and value.T he fuse ratings are listed in the
fuse allocation chart.
The fuse allocation chart is located in the vehicle
tool kit in the stowage compartment under the
trunk floor (
Ypage 241).
If an ewly inserted fuse also blows, have the
cause traced and rectified at aqualified special-
ist workshop, e.g. an authorized Mercedes-Benz
Center.
!Only use fuses that have been approved for
Mercedes-Benz vehicles and which have the
correct fuse rating for the system concerned.
Otherwise, componentsors ystems could be
damaged.
!Make sure that no moisture can enter the
fuse box when the cover is open.
!When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses.
The fuses in your vehicle serve to close down
faulty circuits. If afuse blows, all the compo-
nentsont he circuit and their functions stop
operating.
Fuses253
Breakdown assistance
Z