wheel alignment MERCEDES-BENZ SLK 230 KOMPRESSOR 2003 R170 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2003, Model line: SLK 230 KOMPRESSOR, Model: MERCEDES-BENZ SLK 230 KOMPRESSOR 2003 R170Pages: 304, PDF Size: 6.04 MB
Page 206 of 304
206 Practical hintsWhere will I find ...?
Where will I find ...?First aid kit
The first aid kit is located on the left side of
the trunk.
1First aid kit
Loosen the fastening strap.
Remove first aid kit1.
Vehicle tool kit
The following is included:
Vehicle tool kit
Towing eye bolt
Wheel wrench
Alignment bolt
Vehicle jack
Wheel bolts
Special fuse puller
The jack is exclusively designed for lifting
the vehicle during a wheel change. Always
lower the vehicle on sufficient capacity
jackstands before working under the
vehicle.
iCheck expiration dates and contents
for completeness at least once a year
and replace missing/expired items.
Warning!
G
The jack is designed exclusively for jacking
up the vehicle at the jack tubes built into ei-
ther side of the vehicle. To help avoid per-
sonal injury, use the jack only to lift the
vehicle during a wheel change. Never get
beneath the vehicle while it is supported by
the jack. Keep hands and feet away from the
area under the lifted vehicle. Always firmly
set parking brake and block wheels before
raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface. Be sure that the jack arm is
fully inserted in the jack tube. Always lower
the vehicle onto sufficient capacity jack-
stands before working under the vehicle.
Page 240 of 304
240 Practical hintsFlat tire3Jacking pin
4Jack support tube hole
5Crank
6Small platform
7Large platform
Fold out jacking pin3 in direction of
arrowA until it snaps into place.
The green marking on the jacking pin
should now form one line with the
marking on the jack.
Insert jacking pin3 in direction of
arrowB fully into jack support tube
hole4.
Keeping jack in this position, turn
crank5 clockwise until the jack’s small
platform6 meets the ground. Make
sure that the jack is always vertical
(plumb line).
Jack the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the
ground.
The jack is now standing on large
platform7.
Never start engine while vehicle is
raised.Removing the wheel
1Alignment bolt
Unscrew upper-most wheel bolt and re-
move.
Replace this wheel bolt with alignment
bolt1 supplied in the tool kit.
Remove the remaining bolts.
Warning!
G
Insert the jack arm fully into the jack sup-
port tube hole up to the stop. Otherwise the
vehicle may fall from the jack and cause per-
sonal injury or damage to the vehicle.
!Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
Page 242 of 304
242 Practical hintsFlat tire
Unscrew the alignment bolt, install last
wheel bolt and tighten slightly.
Lowering the vehicle
Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.
Pull the jack out of the jack support
tube.
Remove jack tube cover.1-5Wheel bolts
Tighten the five wheel bolts evenly, fol-
lowing the diagonal sequence illustrat-
ed (1to5), until all bolts are tight.
Observe a tightening torque of 80 ft lb
(110 Nm).
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
Incorrect mounting bolts or improperly
tightened mounting bolts can cause the
wheel to come off. This could cause an acci-
dent. Be sure to use the correct mounting
bolts.
Warning!
G
Use only genuine equipment
Mercedes-Benz wheel bolts. They are identi-
fied by the Mercedes star. Other wheel bolts
may come loose.
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
tip over.
Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
80 ft lb (110 Nm).
Page 279 of 304
279 Technical terms
ABS
(A
ntilock B
rake S
ystem)
Prevents the wheels from locking up
during braking so that the vehicle can
continue to be steered.
Alignment bolt
Metal pin with thread. The centering
pin is an aid used when changing a tire
to align the wheel with the wheel hub.
BabySmart
TM
airbag deactivation
system
This system detects if a special system
compatible child restraint seat is in-
stalled on the passenger seat. The sys-
tem will automatically deactivate the
passenger front airbag when such a
seat is properly installed (indicator
lamp
7
in the center console lights
up). See your authorized
Mercedes-Benz Center for availability.BabySmart
TM
compatible child seats
Special restraint system for children.
The sensor system for the passenger
seat prevents deployment of the pas-
senger front airbag if a BabySmart
TM
compatible child seat is installed.
BAS
(B
rake A
ssist S
ystem)
System for potentially reducing braking
distances in emergency braking situa-
tions. The system is activated when it
senses an emergency based on how
fast the brake is applied.
CAC
(C
ustomer A
ssistance C
enter)
Mercedes-Benz customer service cen-
ter, which can help you with any ques-
tions about your vehicle and provide
assistance in the event of a break-
down.CAN system
(C
ontroller A
rea N
etwork)
Data bus network serving to control ve-
hicle functions such as door locking or
windshield wiping.
Cockpit
All instruments, switches, buttons and
indicator/warning lamps in the passen-
ger compartment needed for vehicle
operation and monitoring.
Collapsible tire
An especially compact spare tire that
must be inflated with a provided air
pump before using. It should only be
used to bring the vehicle to the nearest
service station.
Cruise control
Driving convenience system for auto-
matically maintaining the vehicle speed
set by the driver.
Page 300 of 304
300 IndexTrunk lid emergency release 78
Trunk see Cargo compartment 77
Turn signal lamps
Replacing bulbs 221, 222
Turn signals 43
Additional in mirrors 221
Cleaning lenses 189
Front bulbs 221, 224
Indicator lamps 21
Rear bulbs 222, 225
Turning off
Engine 48
U
Unlocking 28, 74
Centrally from inside 80
Driver’s door in an emergency 210
Fuel filler flap 169
Global 75
In an emergency 210
Selective settings 75
Transmission selector lever
manually 214
Trunk in an emergency 210
Vehicle in an emergency 151
With the remote control 28
Upgrade signalsTele Aid 150
Uphill driving
Cruise control 137
Upshifting 94
Useful features 139
Ashtray 142
Cigarette lighter 143
Garage door opener 152
Interior storage spaces 139
Tele Aid 144
Telephone* 143
V
Vehicle
Battery 245
Locking 23
Lowering 242
Proper use of 14
Towing 249, 251, 252
Unlocking 23
Unlocking in an emergency 210
Vehicle battery 245
Vehicle care 187
Cloth upholstery 192
Cup holder 191
Engine cleaning 189
Gear selector lever 191Hard plastic trim items 191
Headlamps 189
Instrument cluster 191
Leather upholstery 192
Light alloy wheels 191
Ornamental moldings 189
Paintwork 188
Plastic and rubber parts 192
Power washer 188
Rear window cleaning 190
Seat belts 192
Steering wheel 191
Tail lamps 189
Tar stains 188
Turn signals 189
Vehicle washing 189
Window cleaning 190
Wiper blades 190
Vehicle Identification Number (VIN) 258
Vehicle lighting
Checking 170
Vehicle tool kit 206
Alignment bolt 206
Spare fuses 206
Special fuse puller 206
Towing eye bolt 206