key MERCEDES-BENZ SLK-Class 2005 R171 Comand Manual

182 Navigation*POIs (Points of Interest)
Press the
Details
soft key if you want to
see details of a selected POI.
The details disappear after
approx. 3 seconds, or when pressing
the
Details
soft key again.

Press .
The Start Route Guidance menu
(page 150) appears.

Press %;
or

In the Destination entry menu
(page 133), press the
Map
soft key.
The full-screen map appears. Symbols
indicate the POIs.
iThe list also includes the distance “as
the crow flies” (as opposed to road dis-
tance), and the direction to the POI.
Selecting a POI using the map
iThe POI symbols to be displayed can be
selected (
page 166).
POI symbols are indicated only if the
map scale is set to 0.05 mi (50 m), 0.1
mi (100 m), 0.2 mi (200 m), or 0.5 mi
(500 m).
To change the map scale (
page 153).

183 Navigation*
POIs (Points of Interest)

If required, use, , , , +
or ( to move the map.

If the soft key displays are hidden,
press any soft key.
The soft key displays appear.

Press the
Symbol
soft key.
A POI is selected and highlighted in col-
or. Its name appears in the status bar.

Press the
Prev.
or
Next
soft key to select
the desired POI.

Press the
Details
soft key if you want to
see details of a selected POI.
The details disappear again after
approx. 3 seconds, or when pressing
the
Details
soft key again.

Press .
You are prompted to confirm the se-
lected POI as the destination.

Use to select the menu item
Yes
.

Press.
The Start Route Guidance menu
(page 150) appears.

190 SystemSystem settings
Press.
The System menu appears.
Selectable soft keys

Time
soft key
For setting the date and time

Lang.
soft key
For setting the language (
page 193)

Tones
soft key
For switching confirmation beeps
and acoustic signals ON and OFF
(
page 193)

Display
soft key
For changing the display settings
(
page 194)

VC tips
soft key
To call up the Voice control settings*
(
page 195)

Reset
soft key
For resetting COMAND to the factory
settings (
page 199)

Press the
Time
soft key.
The Date/Time setting menu appears.
Calling up the System menu
iThis softkey is only available for vehi-
cles with voice control system*.
Setting the date/time

191 System
System settings
The following options are now available:
Setting the time

Setting the date

Setting the date/time format
Setting the time
The UTC time transmitted by the GPS sat-
ellites has to be set to the local time zone.
This enhances:

correct navigation for routes with time-
dependent traffic guidance, and

correct calculation of the estimated
time of arrival.

Use or  to select the hours or
the minutes.

Press or .
Depending on the selection, hours or
minutes are set.
Setting the minutes:
With GPS reception, each time you
press  or  changes the time in in-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.
Setting the hours:
Each time you press  or , the
hours change in increments of 1 hour.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.
iThere is no automatic change from day-
light saving time to standard time.
This has to be changed manually.
When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.

192 SystemSystem settingsSetting the date 
Use or  to select the day, the
month or the year.

Press or .
Depending on the selection, the day,
the month, or the year is set.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.Setting the Date/Time format

Press the
Format
soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
Setting the format:

Use or  to select a format.

Press.
The appropriate format is selected.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.
iThe date can be set only if GPS recep-
tion is available.
iList entry 1-3: Date formats
List entry 4 and 5: Time formats
(Entry 5 is not visible on the display ex-
ample below.)
Solid circle : format set
Empty circle : format not set

193 System
System settings
The language setting changes the display
language as well as the language used for
voice instructions in navigation announce-
ments.
In the System menu (
page 190),
press the
Lang.
soft key.
The language list is displayed.The following options are available:

Instr. cluster settings
:
The system switches to the language
already set in the vehicle instrument
cluster (
Vehicle Operator’s manual);

All other options:
The system switches to the requested
language.

Use or  to select an entry.

Press.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.

In the System menu, press the
(page 190)
Tones
soft key.
The list of available sounds is dis-
played.
Setting the language
Switching confirmation beeps and
acoustic signals ON/OFF

194 SystemSystem settings
Use or  to select an entry.

Press.
The requested sounds are switched ON
or OFF.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.

Open the System menu (
page 190).

Press the
Display
soft key.
The Display Settings menu appears.The following option and soft key are avail-
able:

Switching the display dimming charac-
teristic

Bright.
soft key
Provides access to adjusting the display
brightness
(page 195)
Setting the display dimming
characteristics
You can select from 3 display dimming
modes:

Day mode
:
The display is constantly set to daytime
design.
iThe square next to a list entry shows
the status.
Empty square = sound OFF
Solid square = sound ON
Display settings

195 System
System settings

Night mode
:
The display is constantly set to night-
time design.

Automatic
:
The display will change depending on
the illumination of the instrument clus-
ter.

Use or  to select an entry.

Press.
Adjusting display brightness

In the Display Settings menu, press the Bright.
soft key.
The Brightness display appears.

Press or .
The brightness changes accordingly.

Press the
Back
soft key or wait for the
screen to change.
The new setting is stored.Use this function to:

Start or delete voice control individual-
ization (
page 196)

Activate/deactivate the voice control
help window
Activate/deactivate the help window

Open the System menu (
page 190).

Press the
VC tips
soft key.
The Voice control menu appears.
Voice control settings*

196 SystemSystem settings
Press the  key to select the
Help
Window
menu item.
The status bar shows you whether the
help window is activated or deactivat-
ed.

Press.
The menu to activate or deactivate the
help window appears. The solid circle
shows whether the help window is
activated or deactivated.
In the following display example, the
help window is activated.

Press  or  to select the menu
item with the empty circle .

Press.
This will activate or deactivate the help
window.
Voice control individualization
The individualization function is used to
adapt the voice control to your own voice
and to therefore improve speech recogni-
tion. This does not affect speech recogni-
tion of other users.
Individualization consists of two stages.
The first stage involves training digits,
while the second stage trains specific com-
mands.

197 System
System settings

From the System menu (
page 190),
press the
VC tips
soft key.
The Voice control menu appears.

Press to select menu item Individualization
.

Press.
The Individualization menu appears.Starting individualization

Press to select menu item
Start new
individualization
.

Press.
The individualization process starts.
The system now guides you through
the individualization process using a di-
alog, all operations are voice inputs.After completion of the first stage, the sys-
tem prompts you to save the data of the
first stage.
If you don’t save the first stage:

Individualization is cancelled,

Data from an existing first stage re-
mains unchanged.
If you save the first stage:

Data from an existing first stage is
over-written but is not saved until the
second stage is started.
iYou can only activate the individualiza-
tion function when the car is station-
ary. If the car is moving, the following
message appears:
Individualization
only possible when car is stationary
.