Radio MERCEDES-BENZ SLK-Class 2008 R171 Comand Manual

38 AudioAudio main menu
Press

.
The Audio main menu appears.If one of the Audio submenus appears: 
Press the
Back
soft key as often as
necessary until the Audio main
menu appears;
or
Press

again.
Various audio sources can be selected in
the Audio main menu.Selectable soft keys
Radio
soft key

Station settings for WB, FM, and AM
wavebands appear
( page
40)
,

CD soft key or
MP3
soft key

The Single CD main menu
( page
50)

or the MP3 main menu
( page
54)
ap
-
pears,

CDC
soft key

The CD changer main menu appears ( page
69)
,

AUX
soft key

Facilitates operation of an external au
-
dio source
( page
76)
.
Calling up the Audio main menu
iThe
CD, MP3
or
CDC
soft key is available
only if a CD is loaded in the appropriate
compartment.
The Satellite Radio menu is accessed
by pressing
5
( page
77)
.

40 AudioRadio operation
Open the Audio main menu ( page
38)
.

Press the
Radio
soft key.
The Radio main menu appears. The sta
-
tion last tuned to will begin to play.
In this example: 
Weather Band

Channel 1
= current station

Press the
FM/AM
soft key in the Radio
main menu.
The main menu for either the FM or AM
waveband appears. The station last
tuned to will begin to play.
The waveband is indicated in the center
of the status bar.In this example: 
FM = FM waveband

1 = selected station is stored on
preset 1
( page
46)
.
Safety instructionsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand
-
still and operate the audio system only when
road, weather and traffic conditions permit.Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate
-
ly 14 m) every second.Switching to Radio mode
Switching wavebands

41 Audio
Radio operation
The following options are available:
Tuning via station search
( page
41)

Tuning via station presets
( page
42)

Tuning via Autostore presets

( page
43)

Tuning via scan search
( page
43)

Manual tuning
( page
44)

Tuning via direct frequency input

( page
44)
Tuning via station search On COMAND control unit
Switch to the desired FM or AM wave
-
band
( page
40)
.

Press
-
or

.
The next receivable ascending frequen
-
cy is tuned in and begins to play;
or

Press
,
or

.
The next receivable descending fre
-
quency is tuned in and begins to play.
On multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Radio display ( page
27)
.

Press
j.
The next receivable ascending frequen
-
cy is tuned in and begins to play;
or
Press
k.
The next receivable descending fre
-
quency is tuned in and begins to play.
iThe wavebands cover different fre
-
quency ranges:FM broadcast band:
FM (VHF = very high frequency)

87.7 - 107.9 MHz

Tuning increments 0.2 MHz
AM broadcast band:
MW (medium wave)

530 - 1710 kHz

Tuning increments 10 kHz
WB waveband:
WB (Weather Band)

162.400 - 162.550 MHz

Tuning increments = 1 channel
Tuning to a FM/AM station
iAudio search function
Freq.
must be
set in the multifunction display
( page
28)
.

42 AudioRadio operationTuning via station presets Ten presets each are available for FM and
AM. On COMAND control unitThe presets are accessed using the num
-
ber keypad, or via the Presets menu.Accessing via number keypad: 
Switch to the desired waveband ( page
40)
.

Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
Accessing via Presets menu:
Switch to the desired waveband ( page
40)
.

Press the
Presets
soft key.
The Presets menu appears.

Use

, 
, 
or

to choose a
preset and press

;
or
Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
On multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Radio display ( page
27)
.

Press
j.
The system tunes to the next station
stored in the station presets;
or
Press
k.
The system tunes to the previous sta
-
tion stored on the station presets.iAudio search function
Memory
must be
set in the multifunction display
( page
28)
.

43 Audio
Radio operation
Tuning via Autostore presets The Autostore function allows placing of
stations into the presets sorted by recep
-
tion quality
( page
46)
.
The system will store the station with the
strongest signal in preset
1.
Ten presets each are available for FM and
AM.
Switch to the desired waveband ( page
40)
.

Press the
Autost.
soft key.
The Autostore preset list appears. It
can take several seconds until all fre
-
quencies are displayed.

Use

, 
, 
or

to choose a
preset and press

;
or
Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
Tuning via scan search Scan search is characterized as follows:
Scan search performs two runs.

During the first run, stations with ex
-
tremely good reception are played.

During the second run, stations with
weaker reception are played.

Scan search plays each receivable sta
-
tion for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
station listened to before the scan
search was started.
Starting scan search 
Switch to the desired waveband ( page
40)
.

Press the
Scan
soft key.
Scanning begins.


44 AudioRadio operationEnding Scan search manually
Press the
Scan
soft key again.
Manual tuning 
Switch to the desired waveband ( page
40)
.

Press
-
or
,
for at least 2
seconds to scroll up or down.
Manual tuning is activated.

Keep the button pressed or release it
and keep tapping
-
or
,
in
quick succession.
The frequency will change by the tuning
increments for the respective wave
-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.

Manual tuning is deactivated if no but
-
ton is pressed for approx. 3 seconds.
Tuning via direct frequency input Entry example:

98.5 MHz in FM waveband
Switch to the FM waveband ( page
40)
.

Press
2
.
The frequency input display appears.
The frequency range of the FM wave
-
band is shown.
iManual tuning is also possible in all
wavebands by pressing

or 
.
The frequency will change by the tuning
increments for the respective wave
-
band each time one of the buttons is
pressed.Frequency increments for manual

tuning:
FM
0.2 MHz

AM
10 kHz

45 Audio
Radio operation

Press the number buttons in
succession:
!
,
, and

.
Each number entered appears in the
display.

The system tunes to the frequency en
-
tered (in this example: 98.5 Mhz) and
switches back to the FM menu.
Seven channels are available on the
Weather Band.

Switch to the WB waveband by press
-
ing the
WB soft key in the Radio main
menu
( page
40)
.
Each time you press the
WB soft key the
system will tune to the strongest re
-
ceivable station.
Tuning via station search On the COMAND control unit
Switch to the WB waveband by press
-
ing the
WB soft key in the Radio main
menu
( page
40)
.
The system will tune to the strongest
receivable station.

Press
-
or
,
.
The search begins descending or as
-
cending.The search stops at the next receivable
station.
On the multifunction steering wheel 
Switch the multifunction display in the
instrument cluster to Audio display ( page
27)
.

Press
j or
k.
The search stops at the next receivable
station.
Tuning via station presets
The seven strongest channels are sort
-
ed in preset 1 to 7 each time you press
the WB soft key. They are accessed us
-
ing the number keypad.

Press one of the number keys

3
- 
.
The system tunes to the station stored
under this number.
iEntries outside the frequency range are
not possible.Within the AM waveband, the input is
restricted to frequencies within the re
-
spective frequency increment, which
is10 kHz.The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.Tuning to a station on Weather Band

46 AudioRadio operationTen presets each are available for the

FM and AM waveband.The following options are available:
Storing manually using number keys

Storing manually using the Presets
menu

Storing using Autostore
( page
46)
Storing manually using the number

keys
3
- "

Tune to the station to be stored ( page
41)
.

Press a number key between
3
and
"
and hold it for more than 2 sec
-
onds.The station is now stored in the respec
-
tive memory location.
Storing manually using the Presets
menu 
Tune to the station to be stored ( page
41)
.

Press the
Presets
soft key.
The Presets menu appears.

Use

, 
, 
or

to select a
preset.

Press

for more than 2 seconds.
The station will be stored in the respec
-
tive memory location.
Storing using Autostore The Autostore function places stations into
the Autostore memory sorted by reception
quality.

The system stores the station with the
strongest signal in preset
1.

Switch to the desired waveband ( page
40)
.

Press the
Autost.
soft key.
The Autostore preset list appears.
Storing FM/AM stations
iThe Autostore feature stores presets in
a separate memory, not in the regular
presets seen under the
Presets
soft
key. As such, the Autostore memory is
only temporary.

47 Audio
Radio operation

Use

to select the

Reprogram
Autostore
header entry.

Press

.
The Autostore search starts. After a de
-
lay the new preset assignment ap
-
pears. The system tunes to the station
stored on preset 1.
To tune-in another station from the
Autostore preset list
( page
43)
.

77
General information
Satellite radio operation
Satellite radio*