lock MERCEDES-BENZ SLK-Class 2008 R171 Comand Manual

ContentsSatellite radio*. . . . . . . . . . . . . . . . . . 77General information . . . . . . . . . . . . . . .
78
Introduction to satellite radio . . . . .
78
Satellite radio operation . . . . . . . . . . . .
79
Switching to Satellite radio mode . .
79
SAT main menu . . . . . . . . . . . . . . . .
80
Selecting a station . . . . . . . . . . . . .
80
Obtaining additional text

information . . . . . . . . . . . . . . . . . . .
83
Storing stations . . . . . . . . . . . . . . .
84
Calling the Sirius Service Center . .
84
Telephone*. . . . . . . . . . . . . . . . . . . . .
85
Important notes . . . . . . . . . . . . . . . . . .
86
Safety instructions . . . . . . . . . . . . .
86
Tips on telephone operation . . . . . .
86
Telephone operation. . . . . . . . . . . . . . .
89
Switching the phone ON/OFF . . . .
89
911 emergency call . . . . . . . . . . . .
89
Entering the PIN (only GSM) . . . . .
91
Entering the unlock code . . . . . . . .
91
Switching to telephone mode . . . .
92
Telephone main menu . . . . . . . . . .
92
Answering an incoming call . . . . . .
94
Placing an outgoing call . . . . . . . . .
95
Accepted and missed calls . . . . . . .
96
Dialed calls . . . . . . . . . . . . . . . . . . .
97
Speed dial . . . . . . . . . . . . . . . . . . .
98
Active call . . . . . . . . . . . . . . . . . . . .
99
Phone book . . . . . . . . . . . . . . . . . . . .
101
Opening the phone book. . . . . . . .
101
Phone Book menu . . . . . . . . . . . . .
101
Selecting a phone book entry

and establishing a connection . . .
102
Deleting a phone book entry . . . .
103
SMS (Mail) . . . . . . . . . . . . . . . . . . . . .
104
SMS inbox . . . . . . . . . . . . . . . . . . .
104
Reading a message . . . . . . . . . . . .
105
Deleting a message . . . . . . . . . . .
106
Exiting from the SMS menu . . . . .
106
Navigation*. . . . . . . . . . . . . . . . . . . .
107
Important notes . . . . . . . . . . . . . . . . .
108
Safety instructions . . . . . . . . . . . .
108
Tips on the navigation DVD. . . . . .
109
Loading/ejecting the DVD . . . . . .
109
Travelling abroad. . . . . . . . . . . . . .
109
Route guidance with GPS . . . . . . .
110
Determination of location after

vehicle transport . . . . . . . . . . . . .
110
Trip interruption during

route guidance . . . . . . . . . . . . . . .
110
Selection lists . . . . . . . . . . . . . . . .
111
Navigation main menu . . . . . . . . . . . .
112
Calling up the Navigation

main menu . . . . . . . . . . . . . . . . . .
112
Avoiding certain road types . . . . .
113
Adjusting the acoustics for

navigation announcements . . . . . .
113
Destination entry . . . . . . . . . . . . . . . .
115
Entering data. . . . . . . . . . . . . . . . .
115
Entering a home address . . . . . . .
116
Destination entry menu. . . . . . . . .
118
Entering a destination . . . . . . . . . .
118
Selecting the region . . . . . . . . . . .
119
Entering a city . . . . . . . . . . . . . . . .
119
Narrowing of the destination

after selecting a city . . . . . . . . . . .
121
Entering a city center . . . . . . . . . .
121
Entering a street in the

destination city . . . . . . . . . . . . . . .
122
Narrowing of the destination

after selecting a street . . . . . . . . .
124
Entering an intersection . . . . . . . .
124

23 At a glance
Telephone* operating elements
Function
Page
1


Telephone main menuSwitching the telephone
ONSwitching the telephone
OFF
928989
2
Soft keys

(multifunction buttons)
Function
Page
3
3
- "
Entering PINEntering unlock codeEntering phone numberSpeed dial
91919598
4

, 
, 
, 
Selection buttons
5


Confirmation
Function
Page
6
0

Answering callsStarting connectionRedialing
949995
7
/

Ending or refusing a call
94
8
.

Switching COMAND

ON/OFF
31
9
4Volume adjustment
31

31 At a glance
Quick reference COMAND


Quick reference COMAND
Switching ON
Turn the key in the steering lock to po
-
sition 1 or 2,
or

Press
.
.
COMAND switches on the last active
system and displays the corresponding
menu.
Switching OFF 
Turn the key in the steering lock to po
-
sition 0 and remove it,
or
Press
.
.
Different volume settings are possible for
Navigation* or Telephone*.A common volume setting is provided for
Radio, Single CD, MP3, CD changer*, AUX
and Satellite radio* operating modes.When setting the volume, the system auto
-
matically stores the setting for the current
-
ly active operating mode. The volume of
navigation announcements can be
changed only during an actual announce
-
ment.Setting the volume 
Turn the rotary control
4
located on
the COMAND control unit,
or
iThe system can be operated as follows:
from COMAND itself, or

from the multifunction steering
wheel
This operating manual describes oper
-
ation from COMAND and from the mul
-
tifunction steering wheel.

Unless otherwise specified, the de
-
scriptions and the displays illustrated
relate to the COMAND control unit.Switching COMAND ON/OFF
iWithout the key in position 1 or 2 of the
steering lock, the system automatically
switches OFF again after approx. 30
minutes of inactivity.iIf a telephone call is in progress (hands
-
free) you cannot switch the COMAND
OFF,
.
is disabled.
Volume


87 Telephone*
Important notes

Please read chapter “Telephone*” be
-
fore attempting to operate your tele
-
phone.

Always drive with extreme caution
when operating the telephone hands-
free.

For safety reasons, the mobile tele
-
phone handset should not be used to
place or receive a call while driving.

If the signal is very weak (display in the
status bar):

Wait until reception improves before
placing a call.

Close the windows and reduce all ex
-
ternal noise as much as possible when
using hands-free operation.

Make sure that the air vents are not
pointed in the direction of the micro
-
phones located in the overhead control
panel near the rear view mirror. Adjust
air vents and/or reduce blower speed
if necessary.

A brief disconnection from the cellular
network is not a malfunction, as this
can occur when the network switches
areas. The phone automatically at
-
tempts to again sign on with a network.

If the message
Enter
unlock
code
is
displayed, enter the unlock code
( page
91)
. Only then will you be able
to use all the telephone functions. You will still be able to make 911 emer
-
gency calls
( page
89)
if the tele
-
phone is locked.
iThis Operator's Manual describes op
-
eration of the telephone using the
COMAND control unit and the multi
-
function steering wheel. Unless other
-
wise specified, the descriptions and
the illustrated displays refer to the
COMAND control unit. Operation of the cellular phone is ex
-
plained in a separate operation guide.!Radio transmitters, such as a portable
telephone or a citizens band unit,
should only be used inside the vehicle if
they are connected to a separate exte
-
rior antenna approved by Mercedes-
Benz.

88 Telephone*Important notesThe telephone cannot, or not yet, be used
in the following situations: 
The telephone is already unlocked, but
it is not yet registered with the net
-
work. The message
NO SERV.
appears in the
status bar. The telephone automatical
-
ly attempts to register with a network.
If there is no network available, “911”
emergency calls can NOT be placed.

If you try to place an outgoing call, the
message
Call
not
possible
is dis
-
played temporarily.

If the message
Telephone
being
activated,
please
wait
is dis
-
played,

If the message
Please
insert
phone
is displayed.
Insert the cell phone into the tele
-
phone cradle*.
Notes about COMAND telephone fea
-
tures using a Bluetooth® connectionMany of the Mercedes-Benz approved mo
-
bile phones, cradles and adaptors avail
-
able for use in your vehicle utilize
Bluetooth® technology to communicate
with each other and the vehicle. Depend
-
ing on your phone brand and model, the
number of in-vehicle or on-display CO
-
MAND telephone features supported via
Bluetooth® communication, and thus
available for your use, may vary. The descriptions and illustrations in this
section are based on the use of fully com
-
patible Mercedes-Benz approved mobile
phones and cradles that do not utilize Blue
-
tooth® technology to communicate with
e a c h o t h e r . I f y o u r v ehicle is equipped with
integrated Bluetooth® functionality, a
Bluetooth® capable mobile phone, head
-
set, Laptop, PDA, etc. is required to utilize
those features.
For additional information about Mer
-
cedes-Benz approved Bluetooth® mobile
phones and related accessories please
contact the Mercedes-Benz Customer As
-
sistance Center at 1-800-FOR-MERCedes
or your nearest authorized Mercedes-Benz
Center.

90 Telephone*Telephone operationThe 911 emergency call will also function if
the telephone is locked.Placing an emergency call An emergency call can be placed using the
cell phone or the COMAND control unit.Using the cell phone ( Telephone Operation Guide).
Using the COMAND control unit before
PIN or unlock code entry 
Press the
911
soft key.
The system opens an inquiry menu
prompting you if you want to dial a
911 call.

If necessary, press

to select
Yes
.

Press

to confirm
Yes
if you want to
place the 911 emergency call.
The telephone establishes the connec
-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.
If you do not want to place the emergency
call:
Press

to select
No when the inquiry
menu appears.

Press

to confirm
No.
Using the COMAND control unit after
PIN and unlock code entry 
Press

repeatedly until the Tele
-
phone main menu appears.
iIf you cannot make an emergeny call,
you will have to initiate rescue mea
-
sures yourself.

91 Telephone*
Telephone operation
In succession, press the number keys
!
,
3
and
3
.

Press
0
.
The telephone establishes the connec
-
tion, the ringing tone is audible.

Wait until the emergency call center
answers, then describe the emergency.
The PIN protects the telephone against un
-
authorized use. Your PIN is found in the
telephone service provider's documenta
-
tion.Commit your PIN to memory.

Most telephone functions are not available
before entering the PIN.

Press the corresponding number key 3
- "
for each digit.
In case of erroneous entry, you can de
-
lete the last or more digits.
Press the
Delete
soft key as often
as required.

Once all digits have been entered,
press the
OK soft key.
If the input is correct, the telephone
will log itself into the network.
If the input is incorrect, message

Wrong PIN number
will appear briefly.

Re-enter the PIN.
After three incorrect entries, the SIM
card is blocked. Message
SIM
card
blocked
will appear briefly.

The PUK has to be entered.
( Telephone Operation Guide)
The unlock code protects the telephone
against unauthorized use. To activate the
unlock code (
 Telephone Operation
Guide).
Commit your unlock code to memory.

Most telephone functions are not available
before entering the unlock code.
Entering the PIN (only GSM) iThe PIN may be entered on the cell
phone itself (
 Telephone Operation
Guide).
iThe telephone cannot be used before it
is logged-in.Entering the unlock code

92 Telephone*Telephone operationExample: unlock code 2307
In sequence, press the number
keys

, 
,"
and

.
In case of erroneous entry, you can de
-
lete the last or more digits.
Press the
Delete
soft key as often
as required.

After entering all digits, press

or the
OK soft key.All telephone functions are available if
the correct number has been entered.After registering, information referring
to the telephone signal appears at the
right end of the status bar.The unlock code has to be entered
again if the entry was incorrect.
When COMAND is switched ON, switching
to telephone mode from any other mode is
done as follows:On the COMAND control unit
Press

.
This also opens the Telephone main
menu.
On the multifunction steering wheel
See
( page
27)
1 Observe all legal requirements
iThe screen switches back to the last
active mode if the unlock code is not
entered within 8 seconds after you are
prompted to do so.
Switching to telephone mode
Telephone main menuWarning
G
Some jurisdictions prohibit the driver from
using a cellular telephone while driving.
Whether or not prohibited by law, for safety
reasons, the driver should not use the cellu
-
lar telephone while the vehicle is in motion.
Stop the vehicle in a safe location before
placing or answering a call.If you nonetheless choose to use the cellular
phone while driving, please use the hands-
free device and be sure to pay attention to
the traffic situation at all times. Use the cel
-
lular phone
1 only when road, weather and
traffic conditions permit.

93 Telephone*
Telephone operation

Press

.
The Telephone main menu appears.
Telephone status information is displayed
on the right end of the status bar.
The following displays are possible:
READY
= telephone is logged into your
mobile communcations home network
and ready for use,

ROAMING
= telephone is logged into a
mobile communications network out
-
side your home network,

NO SERV.
= no network available,

= telephone signal strength,

= call active
( page
99)
.
Other messages could also appear:
If the message

Please
insert
phone
,
Phone
not
installed
or
Please
insert SIM card

appears, see chapter “Switching the
phone ON / OFF”
( page
89)
.

If the message

Please
Enter
PIN:
appears, see “En
-
tering the PIN”
( page
91)
.

If the message

Enter
unlock
code:
appears, see “En
-
tering unlock code”
( page
91)
.
Selectable soft keys and options
soft key

Opens the phone book
( page
101)
,

Recvd.#
soft key

Opens the accepted and missed calls
list
( page
96)
,

Dialed
# soft key

Opens dialed calls list
( page
97)
,

SMS
soft key

Provides access to the SMS menu ( page
104)
,

Entry of a phone number
( page
95)
.
iThe information is also displayed in
Navigation* mode (only in map dis
-
plays).


140 Navigation*During route guidance1Estimated time of arrival2Remaining driving time in hours and
minutes3Remaining journey (distance)1, 2 and 3 refer to the stop-over desti
-
nation. You'll only see the details for the fi
-
nal destination when you arrive at your
stopover and the system has calculated
the route to the main destination.
Selectable soft keys
Route
soft key:

Provides access to the display of the
route on the map,

Mode
soft key:

Provides access to the setting of the
route mode
( page
113)
.

In the Info menu, press the
Route
soft
key.
The map appears. The route remaining
is highlighted in blue. The destination is marked with a flag , any stop-over destination is marked with a flag

. The current vehicle posi
-
tion is identified with the
symbol.

Depending on the distance to the des
-
tination, it may take some time before
the route display appears.
iThe estimated time of arrival does not
refer to the time zone of destination,
but always refers to the time zone of
the vehicle's current location. For a
correct calculation, make sure that the
system clock is set correctly ( page
166)
.
Displaying the route on the map
s