garage door opener MERCEDES-BENZ SLK280 2006 R171 Owner's Manual

Contents
Driving tips ................................... 162
Automatic shift program .............. 163
Gear selector lever one-touch
gearshifting .................................. 164
Steering wheel gearshift control
one-touch gearshifting ................. 165
Manual shift program
SLK 55 AMG................................. 169
Emergency operation
(Limp Home Mode) ...................... 172
Good visibility .................................... 173
Headlamp cleaning system* ........ 173
Rear view mirrors ......................... 173
Sun visors .................................... 176
Rear window defroster ................. 177
Climate control .................................. 178
Switching climate control
system on/off .............................. 181
Setting the temperature ............... 181
Adjusting air distribution .............. 182
Adjusting air volume .................... 183
Basic settings............................... 183
Defrosting windshield .................. 184
Air recirculation mode.................. 185
Air conditioning ............................ 187
Residual engine heat utilization.... 188Automatic climate control* ................ 190
Deactivating the climate
control system .............................. 194
Operating the climate control
system in automatic mode............ 194
Setting the temperature................ 195
Adjusting air distribution............... 196
Adjusting air volume ..................... 197
Defrosting windshield ................... 197
Maximum cooling MAX COOL ....... 199
Air recirculation mode .................. 199
Air conditioning............................. 200
Residual heat and ventilation ........ 202
Audio system ...................................... 203
Audio and telephone*, operation .. 203
Operating safety ........................... 203
Operating and display elements.... 204
Button and soft key operation....... 206
Operation ...................................... 206
Radio operation ............................ 209
Introduction to satellite radio*
(USA only) ..................................... 214
CD mode ....................................... 219
GSM network phones ................... 229
TDMA or CDMA network phones .. 236
Emergency calls “911”.................. 243Power windows .................................. 246
Opening and closing the
windows........................................ 246
Synchronizing power windows ...... 251
Retractable hardtop ........................... 252
Opening and closing the
retractable hardtop....................... 252
Wind screen .................................. 259
Driving systems .................................. 260
Cruise control ............................... 260
Loading .............................................. 265
Roof rack ...................................... 265
Useful features ................................... 266
Storage compartments ................. 266
Shelf behind roll bars .................... 268
Cup holder .................................... 268
Ashtray ......................................... 269
Cigarette lighter ............................ 270
Power outlet ................................. 271
Floormat (driver’s side only) ......... 271
Telephone* ................................... 272
Tele Aid ......................................... 273
Garage door opener* .................... 281
Heated steering wheel*
(SLK 280, SLK 350, Canada only) . 288

30 At a glanceOverhead control panel
Item
Page
1
Interior lighting on/off
117
2
Interior lighting automatic
control switch
119
3
Right reading lamp on/off
117
4
Tele Aid (emergency call
system) button
273
5
Garage door opener*
281
6
Sensor for auto-dimming
mirrors*
174
7
Interior rear view mirror
45,
173
8
Left reading lamp on/off
119

281 Controls in detail
Useful features
Garage door opener*
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as
garage door openers, gate openers, or oth-
er devices compatible with HomeLink
® or
some other systems.
Before the integrated remote control can
be used, it must be programmed to the ga-
rage door opener, gate operator or other
device you wish to operate. See the follow-
ing instructions for programming informa-
tion.
Overhead control panel with integrated re-
mote control1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control but-
ton
Warning!
G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
- signaling the door to stop and reverse -
does not meet current U.S. federal safety
standards.


282 Controls in detailUseful featuresProgramming the integrated remote
control
Step 1:
Switch on the ignition (
page 36).Step 2:

If you have previously programmed an
signal transmitter button and wish to
retain its programming, proceed to
step 3.
If you are programming the integrated
remote control for the first time, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when the indicator lamp1
begins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and be-
gin directly with step 3.Step 3:

Hold the end of the hand-held remote
control5 of the device you wish to
train approximately 2 to 5 in
(5 to12 cm) away from the signal trans-
mitter button (2, 3 or4) to be pro-
grammed, while keeping the indicator
lamp1 in view.
Step 4:

Using both hands, simultaneously
press the hand-held remote control
button6 and the desired signal trans-
mitter button (2, 3 or4). Do not
release the buttons until step 5 is com-
pleted.
The indicator lamp1 will flash, first
slowly and then rapidly.
When programming a garage door opener, it
is advised to park outside the garage.
Do not run the engine while programming
the integrated remote control. Inhalation of
exhaust gas is hazardous to your health. All
exhaust gas contains carbon monoxide, and
inhaling it can cause unconsciousness and
possible death.


283 Controls in detail
Useful features
Step 5:
After the indicator lamp1 changes
from a slow to a rapidly flashing light,
release the hand-held remote control
button and the signal transmitter but-
ton.
Step 6:

Press and hold the just-trained signal
transmitter button (2, 3 or4) and
observe the indicator lamp1.If the indicator lamp1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or4) is pressed and re-
leased.
Step 7:

To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
operator’s manual.
iThe indicator lamp1 flashes immedi-
ately the first time the signal transmit-
ter button is programmed. If this button
has already been programmed, the in-
dicator lamp will only start flashing af-
ter 20 seconds.
iIf the indicator lamp1 flashes rapidly
for about 2 seconds and then turns to a
constant light, continue with
programming steps 8 through 12 as
your garage door opener may be
equipped with the “rolling code”
feature.


284 Controls in detailUseful featuresStep 9:
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:

Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:

Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.Step 12:

Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:

To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.iSome garage door openers (or other
rolling code equipped devices) may
require you to press, hold for 2 seconds
and release the same signal transmit-
ter button a third time to complete the
training process.


285 Controls in detail
Useful features
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
Step 4:
Press and hold the signal transmitter
button (2, 3 or4). Do not release
this button until it has been successful-
ly trained.

While still holding down the signal
transmitter button (2, 3 or4),
“cycle” your hand-held remote control
button6 as follows: Press and hold
button6 for 2 seconds, then release
it for 2 seconds, and again press and
hold it for 2 seconds. Repeat this se-
quence on the hand-held remote con-
trol until the frequency signal has been
learned. Upon successful training, the
indicator lamp1 will flash slowly and
then rapidly after several seconds.

Proceed with programming step 5 and
step 6 to complete.Reprogramming a single signal trans-
mitter button
To program a device using a signal trans-
mitter button previously trained, follow
these steps:

Switch on the ignition (
page 36).

Press and hold the desired signal
transmitter button (2, 3 or4).
Do not release the button.

The indicator lamp1 will begin to
flash after 20 seconds. Without releas-
ing the signal transmitter button, pro-
ceed with programming starting with
step 3.
iUpon completion of programming the
integrated remote control, make sure
you retain the hand-held remote con-
trol that came with the garage door
opener, gate operator or other device.
You may need it for use in other vehi-
cles, for future programming of an
integrated remote control, or simply for
continued use as a hand-held remote
control to operate the respective
device in other situations.

287 Controls in detail
Useful features


While performing step 3, hold the
hand-held remote control6 at differ-
ent lengths and angles from the signal
transmitter button (2, 3 or4) you
are programming. Attempt varying an-
gles at the distance of 2 to 5 inches
(5 to 12 cm) away or the same angle at
varying distances.


If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.


Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
iCertain types of garage door openers
are incompatible with the integrated
remote control. If you should experi-
ence further difficulties with program-
ming the integrated remote control,
contact an authorized Mercedes-Benz
Center, or call Mercedes-Benz
Customer Assistance Center (in the
USA only) at 1-800-FOR-MERCedes, or
Customer Service (in Canada) at
1-800-387-0100.
iUSA only:
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
Any unauthorized modification to this
device could void the user’s authority
to operate the equipment.

469 Index
F
First aid kit 388
Flat tire 408
Inflating collapsible spare tire 417
Lifting vehicle 413
Lowering vehicle 419
Mounting spare wheel 412, 415
TIREFIT kit* 408
Floormat (Driver’s side only) 271
Fog lamps 113, 401
Corner-illuminating front fog
lamps* 115
Footwell lighting* 118
FSS PLUS (Canada vehicles) 459
Control system 350
Fuel
Additives 453
Consumption statistics (Control
system) 149
Filler flap 304
Fuel tank capacity 450
MON 304
Premium unleaded gasoline 304,
452Refueling 304
Reserve warning lamp 365, 366
RON 304
Technical data 449
Fuel filler flap
Localization 25
Fuel gauge (Instrument cluster) 25
Fuse extractor (Vehicle tool kit) 388
Fuses 430
Auxiliary fuse box 432
Main fuse box 431
Spare fuses (Vehicle tool kit) 388G
Garage door opener* 281
Gasoline see Fuel
GAWR 344
Gear range (Automatic
transmission*) 160, 459
Limiting 160
Shifting into optimal 164
Gear selector lever (Automatic
transmission*) 157
Position 157, 159
Global locking/unlocking see SmartKey
Global Positioning System see GPS
Glove box 266
Good visibility 173
GPS 87, 88, 459
Tele Aid system 273
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GSM network phones (Telephone*) 229
GVW 344
GVWR 345

477 Index
Removing wheel 415
Retreads 317
Rims and tires 439
Rotating 347
Run Flat Indicator* 329
Service life 318
Sizes 439
Snow chains 349
Spare wheel 391
Speed rating 298
Storing 319
Supplemental tire inflation pressure
information 304
Temperature 343
Traction 298
Tread depth 319, 348
Treadwear indicators (TWI) 297
Wear pattern 347
Wheel chock (Vehicle tool kit) 388
Winter 348
Tools see Vehicle tool kit
Tow-away alarm see Anti-theft systems
Towing (Vehicle) 426
Traction 163, 346Transmission, display message 372
Transporting the vehicle 89
Traveling abroad 301
Tread 346
Tread depth 319, 348
Treadwear indicators 297, 346
Trip computer menu (Control
system) 149
Trunk 98
Cargo compartment cover 253
Lighting 118
Trunk lid emergency release 100
Trunk lid lock 395
Unlocking with SmartKey 96
Turn signals 55, 401
Additional in mirrors 401
TWI see Treadwear indicatorsU
Uniform Tire Quality Grading
Standards 346
Unlocking 34
Centrally from inside 102
In an emergency 280
With SmartKey 34
Upholstery
Cleaning 360
Useful features
Ashtray 269
Cigarette lighter 270
Cup holder 268
Floormat (Driver’s side only) 271
Garage door opener* 281
Heated steering wheel* 288
Parcel net 267
Power outlet 271
Storage compartments, interior 266
Tele Aid 273
Telephone* 272