garage door opener MERCEDES-BENZ SLK350 2007 R171 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2007, Model line: SLK350, Model: MERCEDES-BENZ SLK350 2007 R171Pages: 473
Page 7 of 473
Contents
Loading .............................................. 251
Roof rack ...................................... 251
Useful features .................................. 252
Storage compartments................. 252
Shelf behind roll bars ................... 254
Cup holder.................................... 254
Ashtray ......................................... 255
Cigarette lighter ........................... 256
Power outlet ................................. 257
Floormat (driver’s side only) ......... 257
Telephone*................................... 258
Tele Aid* ...................................... 261
Garage door opener* ................... 270
Heated steering wheel*
(SLK 280, SLK 350, Canada only) 276
Operation......................................... 277
The first 1 000 miles (1 500 km)......... 278
Driving instructions............................ 279
Drive sensibly – save fuel ............. 279
Drinking and driving ..................... 279
Pedals .......................................... 279
Power assistance ......................... 280
Brakes .......................................... 280
Driving off .................................... 282
Parking ......................................... 282
Tires ............................................. 283
Hydroplaning ................................ 284
Tire traction.................................. 284
Tire speed rating .......................... 285
Winter driving instructions ........... 286
Standing water ............................. 287
Passenger compartment .............. 287
Driving abroad.............................. 287
Control and operation of radio
transmitter ................................... 287
Catalytic converter ....................... 288
Emission control .......................... 289
Coolant temperature .................... 289At the gas station .............................. 291
Refueling ...................................... 291
Check regularly and before a
long trip ....................................... 292
Engine compartment ......................... 294
Hood ............................................ 294
Engine oil ..................................... 296
Transmission fluid level* .............. 300
Coolant level ................................ 300
Windshield washer system and
headlamp cleaning system*......... 302
Battery ......................................... 303
Tires and wheels................................ 304
Important guidelines .................... 304
Tire care and maintenance........... 305
Direction of rotation..................... 307
Loading the vehicle ...................... 307
Recommended tire inflation
pressure ....................................... 312
Checking tire inflation pressure ... 314
MOExtended system* .................. 317
Tire labeling ................................. 318
Load identification ....................... 322
Page 32 of 473
31 At a glance
Overhead control panel
Overhead control panel
ItemPage
1Interior lighting on/off116
2Interior lighting automatic
control switch116
3Right reading lamp on/off117
4Tele Aid* (emergency call
system) button261
5Garage door opener*270
6Sensor for auto-dimming
rear view mirrors*169
7Interior rear view mirror46,
168
8Microphone for Tele Aid*
and telephone*261,
258
9Left reading lamp on/off117
Page 271 of 473
270 Controls in detail
Useful features
Garage door opener*
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as
garage door openers, gate openers, or oth-
er devices compatible with HomeLink
® or
some other systems.
Before the integrated remote control can
be used, it must be programmed to the
garage door opener, gate operator or other
device you wish to operate. See the
following instructions for programming
information.
Overhead control panel with integrated
remote control
1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of
vehicle equipment):
5Hand-held remote control of
garage door opener, gate
operator or other device
6Hand-held remote control
button
Warning!G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
– signaling the door to stop and reverse –
does not meet current U.S. federal safety
standards.
Page 272 of 473
271 Controls in detail
Useful features
Programming the integrated remote
control
Step 1:
Switch on the ignition (page 37).Step 2:
If you have previously programmed a
signal transmitter button and wish to
retain its programming, proceed to
step 3.
If you are programming the integrated
remote control for the first time, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when indicator lamp1
begins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and
begin directly with step 3.Step 3:Hold the end of hand-held remote
control5 of the device you wish
to train approximately
2 to 5 in (5 to12 cm) away from the
signal transmitter button (2, 3 or4)
to be programmed, while keeping indi-
cator lamp1 in view.
Step 4:
Using both hands, simultaneously
press hand-held remote control
button6 and the desired signal trans-
mitter button (2, 3 or4). Do not
release the buttons until step 5 is com-
pleted.
Indicator lamp1 will flash, first slowly
and then rapidly.
When programming a garage door opener, it
is advised to park outside the garage.
Do not run the engine while programming
the integrated remote control. Inhalation of
exhaust gas is hazardous to your health.
All exhaust gas contains carbon monoxide
(CO), and inhaling it can cause unconscious-
ness and possible death.
iIndicator lamp1 flashes immediately the
first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start
flashing after 20 seconds.
Page 273 of 473
272 Controls in detail
Useful features
Step 5:
After indicator lamp1 changes from a
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
Step 6:
Press and hold the just-trained signal
transmitter button (2, 3 or4) and
observe indicator lamp1.
If indicator lamp1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or4) is pressed and
released.
Step 7:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual. Step 9:
Press the “training” button on the
garage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the
programmed signal transmitter
button (2, 3 or4).
iIf indicator lamp1 flashes rapidly for about
2 seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.
Page 274 of 473
273 Controls in detail
Useful features
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a
second time to complete the training
process.
Step 12:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
Step 4:Press and hold the signal transmitter
button (2, 3 or4). Do not
release this button until it has been
successfully trained.
While still holding down the signal
transmitter button (2, 3 or4),
“cycle” your hand-held remote control
button6 as follows: Press and hold
button6 for 2 seconds, then release
it for 2 seconds, and again press and
hold it for 2 seconds. Repeat this
sequence on the hand-held remote
control until the frequency signal has
been learned. Upon successful train-
ing, indicator lamp1 will flash slowly
and then rapidly after several seconds.
Proceed with programming step 5 and
step 6 to complete.
iSome garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to
complete the training process.
iUpon completion of programming the inte-
grated remote control, make sure you retain the
hand-held remote control that came with the ga-
rage door opener, gate operator or other device.
You may need it for use in other vehicles, for fu-
ture programming of an integrated remote con-
trol, or simply for continued use as a hand-held
remote control to operate the respective device
in other situations.
Page 276 of 473
275 Controls in detail
Useful features
Programming tips
If you are having difficulty programming
the integrated remote control, here are
some helpful tips:
Check the frequency of the hand-held
remote control5 (typically located on
the reverse side of the remote). The in-
tegrated remote control is compatible
with radio-frequency devices operating
between 280-390 MHz.
Put a new battery in hand-held remote
control5. This will increase the likeli-
hood of the hand-held remote control
sending a faster and more accurate sig-
nal to the integrated remote control.
While performing step 3, hold
hand-held remote control5 at
different lengths and angles from the
signal transmitter button (2, 3 or4)
you are programming.
Attempt varying angles at the distance
of 2 to 5 in (5 to 12 cm) away or the
same angle at varying distances.
If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.
Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
iCertain types of garage door openers are
incompatible with the integrated remote control.
If you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance
Center (in the USA only) at
1-800-FOR-MERCedes, or Customer Service
(in Canada) at 1-800-387-0100.
iUSA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
iCanada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
Page 458 of 473
457 Index
F
First aid kit 382
Flat tire 401
Inflating collapsible spare tire 411
Lifting vehicle 407
Lowering vehicle 413
Mounting spare wheel 407, 409
TIREFIT kit* 401
Floormat 257
Fog lamps 112, 394
Corner-illuminating front fog
lamps* 114
Footwell lighting* 117
FSS PLUS (Canada vehicles) 334
Fuel
Additives 447
Consumption statistics (Control
system) 148
Filler flap 291Fuel tank capacity 444
MON 292, 447
Premium unleaded gasoline 292,
446
Refueling 291
Requirements 292, 447
Reserve warning lamp 353
RON 292, 447
Technical data 443
Fuel filler flap 291
Fuel gauge (Instrument cluster) 27
Fuse extractor (Vehicle tool kit) 382
Fuses 425
Fuse extractor 425
Replacing 425
Spare fuses 425
Spare fuses (Vehicle tool kit) 382G
Garage door opener* 270
Gasoline see Fuel
GAWR 328
Gear range
Automatic transmission 160
Limiting 160
Shifting into optimal 163, 165
Gear selector lever 155
Gearshift pattern 155
Position 156, 157
Shifting procedure 156
Gear selector lever one-touch gearshifting
Automatic transmission 162
Global locking/unlocking see SmartKey
Glove box 252
Good visibility 168
GPS 90, 91
Tele Aid system* 262
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GSM network phones (Telephone*) 219
GVW 328
GVWR 328
Page 468 of 473
467 Index
Tread 330
Tread depth 306, 332
Treadwear indicators 283, 330
Trip computer menu (Control
system) 148
Trunk 100
Lighting 116
Luggage cover 241
Trunk lid emergency release 101
Trunk lid lock 388
Turn signals 55, 394
Additional in mirrors 394
TWI see Treadwear indicatorsU
Uniform Tire Quality Grading
Standards 330
Unlocking 36
Centrally from inside 102
In an emergency 269
With SmartKey 36
Upholstery
Cleaning 343
Useful features
Ashtray 255
Cigarette lighter 256
Cup holder 254
Floormat (Driver’s side only) 257
Garage door opener* 270
Heated steering wheel* 276
Parcel net 253
Power outlet 257
Storage compartments, interior 252
Tele Aid* 261V
Valve extractor (Vehicle tool kit) 382
Vehicle
Battery 303, 415
Bulbs 393
Fuses 425
Individual settings (Control
system) 136
Jump starting 419
Lifting with jack 407
Locking 62
Proper use of 16
Towing 421
Unlocking/locking in an
emergency 387
Vehicle capacity weight 330
Vehicle care 337
Vehicle Identification Number see VIN
Vehicle jack 383