fog MERCEDES-BENZ SLK55AMG 2007 R171 Owner's Guide

393 Practical hints
Replacing bulbs
Replacing bulbs
Bulbs
Safe vehicle operation depends on proper
exterior lighting and signaling. It is there-
fore essential that all bulbs and lamp
assemblies are in good working order at
all times.
Correct headlamp adjustment is extremely
important. Have headlamps checked and
readjusted at regular intervals and when a
bulb has been replaced. Contact an
authorized Mercedes-Benz Center for
headlamp adjustment.
Warning!G
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas.
A bulb can explode if you:

touch or move it when hot

drop the bulb

scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
iIf the headlamps are fogged up on the inside
as a result of high humidity, driving the vehicle a
short distance with the lights on should clear up
the fogging.
iBackup bulbs will be brought into use
when lamps malfunction. Read and observe
the messages in the multifunction
display (
page 375).

394 Practical hints
Replacing bulbs
Front lamps
LampType
1Additional turn signal
lampLED
2Turn signal lamp3457 AK
3Halogen headlamp:
Low beam
H7 (55 W)
Bi-Xenon* headlamp:
Low and high beam1
1Vehicles with Bi-Xenon* headlamps: Low beam
and high beam use the same D2S-35W lamp. Do
not replace the Bi-Xenon* bulbs yourself. Contact
an authorized Mercedes-Benz Center.
D2S-35 W
4Front fog lampHB4 (51 W)
Front fog lamp
(vehicles with Sport
Package* and
SLK 55 AMG)H7 (55 W)
Corner illuminating
front fog lamp*H7 (55 W)
LampType
5Parking and standing
lampW5W
6Halogen headlamp:
High beam/high beam
flasher
H7 (55 W)
Bi-Xenon* headlamp:
High beam flasher
H7 (55 W)
7Side marker lampW5W

395 Practical hints
Replacing bulbs
Rear lamps Notes on bulb replacement

Only use 12-volt bulbs of the same type
and with the specified watt rating.

Switch the lights off before replacing a
bulb to prevent short circuits.

Always use a clean lint-free cloth when
handling bulbs.

Your hands should be dry and free of oil
and grease.

If the newly installed bulb does not
come on, contact an authorized
Mercedes-Benz Center.Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:

Additional turn signal lamps in the
exterior rear view mirrors

Bi-Xenon* lamps

Front fog lamps

High mounted brake lamp

Brake lamps

Front and rear side marker lamps

Parking/standing lamps in the tail
lamp assemblies
LampType
8Rear fog lamp (driver’s
side only)P21W
9High mounted brake
lampLED
aTail, parking, standing,
side marker lamp and
brake lampLED
bLicense plate lampsC5W
cBackup lampP21W
dTurn signal lampPY 21 W
!Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the
vehicle. Only have the LEDs replaced by an
authorized Mercedes-Benz Center.

397 Practical hints
Replacing bulbs
Low beam bulb (Halogen headlamps
only)
Turn housing cover1 counterclock-
wise and remove.
Turn bulb socket5 with the bulb
counterclockwise and remove.
Pull the bulb out of bulb socket5.
Press the new bulb into bulb socket5.
Place bulb socket5 back into the
lamp and turn it clockwise.
Reinstall housing cover1.
High beam/high beam flasher bulb
(Halogen headlamps) / High beam
flasher bulb (Bi-Xenon* headlamps)
Turn bulb socket3 with the bulb
counterclockwise and remove.
Pull the bulb out of bulb socket3.
Press the new bulb into bulb socket3.
Place bulb socket3 back into the
lamp and turn it clockwise.Front turn signal bulb
Turn bulb socket2 with the bulb
counterclockwise and remove.
Press gently onto the bulb and turn it
counterclockwise out of bulb
socket2.
Press the new bulb gently into bulb
socket2 and turn it clockwise.
Place bulb socket2 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
Turn bulb socket4 with the bulb
counterclockwise and remove.
Pull the bulb out of bulb socket4.
Press the new bulb into bulb socket4.
Place bulb socket4 back into the
lamp and turn it clockwise.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 109).
Open the trunk lid (page 100).
Tail lamp unit
1Bulb socket for rear fog lamp
(driver’s side only)
2Bulb socket for turn signal lamp
3Bulb socket for backup lamp

454 Index
Combination switch 113
High beam flasher 113
High beam headlamps 55, 113
Low beam headlamps 55
Turn signals 55
Windshield wipers 56
Control system 121
Control system menus 124
AMG 128
AUDIO 133
NAV* 135
Settings 136
Standard display 127
TEL* 149
Trip computer 148
Vehicle status message memory 135Control system submenus
Convenience* 147
Instrument cluster 139
Lighting 143
Time/Date 141
Vehicle 146
Convenience opening/closing*
Power windows 238
Retractable hardtop 244
Coolant 448
Adding water 293
Anticorrosion/antifreeze 449
Checking coolant level 300
Messages in the multifunction
display 368–370
Technical data 444
Temperature 289
Temperature gauge (Multifunction
display) 127Corner-illuminating front fog lamps* 114
Replacing bulbs 393
Cruise control 247
Messages in the multifunction
display 358
Cup holder 254
Curb weight 328
D
Date (Control system) 142
Daytime running lamp mode 111
Setting 143
Deep water see Standing water
Defrosting
Rear window 170
Windshield (Automatic climate
control*) 188
Windshield (Climate control) 177

457 Index
F
First aid kit 382
Flat tire 401
Inflating collapsible spare tire 411
Lifting vehicle 407
Lowering vehicle 413
Mounting spare wheel 407, 409
TIREFIT kit* 401
Floormat 257
Fog lamps 112, 394
Corner-illuminating front fog
lamps* 114
Footwell lighting* 117
FSS PLUS (Canada vehicles) 334
Fuel
Additives 447
Consumption statistics (Control
system) 148
Filler flap 291Fuel tank capacity 444
MON 292, 447
Premium unleaded gasoline 292,
446
Refueling 291
Requirements 292, 447
Reserve warning lamp 353
RON 292, 447
Technical data 443
Fuel filler flap 291
Fuel gauge (Instrument cluster) 27
Fuse extractor (Vehicle tool kit) 382
Fuses 425
Fuse extractor 425
Replacing 425
Spare fuses 425
Spare fuses (Vehicle tool kit) 382G
Garage door opener* 270
Gasoline see Fuel
GAWR 328
Gear range
Automatic transmission 160
Limiting 160
Shifting into optimal 163, 165
Gear selector lever 155
Gearshift pattern 155
Position 156, 157
Shifting procedure 156
Gear selector lever one-touch gearshifting
Automatic transmission 162
Global locking/unlocking see SmartKey
Glove box 252
Good visibility 168
GPS 90, 91
Tele Aid system* 262
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GSM network phones (Telephone*) 219
GVW 328
GVWR 328

459 Index
Language in multifunction display (Control
system) 139
Layout of poly-V-belt drive 432
License plate lamps 395
Light alloy wheels
Cleaning 341
Technical data 434
Lighter see Cigarette lighter
Lighting 109
Combination switch 113
Corner-illuminating front fog
lamps* 114
Daytime running lamp mode 111
Door entry lamps 117
Exterior lamp switch 109
Exterior lamps, cleaning 340
Fog lamps 112
Footwell lighting* 117
Hazard warning flasher 115Headlamp mode,
automatic/manual 110
High beam 113
High beam flasher 113
Individual settings (Control
system) 143
Instrument cluster illumination 118
Interior lighting 116
Low beam headlamps 109
Night security illumination (Control
system) 144
Reading lamps 117
Standing lamps 109
Trunk 116
Limp-home mode 167
Loading 251, 307, 327
Locator lighting (Control system) 144
Locking
And parking 59
Centrally (Control system) 146
Centrally from inside 102Locking knob (Doors) 99
Locking the vehicle 62
Long trip, checking before 292
Loss of
Service and Warranty Booklet 429
SmartKey or mechanical key 98
Low beam headlamps 109, 394
Lubricants, technical data 443
Luggage cover 32, 241
M
Main dimensions 441
Maintenance service indicator (Control
system) 334
Maintenance System 334
Manual seat see Seats
Manual shift program* 165
Deactivating 167