tire pressure reset MERCEDES-BENZ SLK55AMG 2007 R171 Owner's Manual

Contents
DOT, Tire Identification
Number (TIN) ............................... 322
Maximum tire load ....................... 324
Maximum tire inflation pressure .. 324
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 325
Tire ply material ........................... 327
Tire and loading terminology ........ 327
Rotating tires ............................... 330
Winter driving .................................... 332
Winter tires .................................. 332
Snow chains................................. 333
Maintenance ...................................... 334
Maintenance service indicator
message....................................... 334
Clearing the maintenance
service indicator message............ 335
Maintenance service term
exceeded ..................................... 335
Calling up the maintenance
service indicator display............... 335
Resetting the maintenance
service indicator........................... 336
Vehicle care ....................................... 337
Cleaning and care of vehicle ........ 337
Practical hints.................................. 345
What to do if … ................................... 346
Lamps in instrument cluster ......... 346
Lamp in center console................. 354
Vehicle status messages in the
multifunction display..................... 356
Where will I find...? ............................. 382
First aid kit .................................... 382
Vehicle tool kit, vehicle jack ......... 382
Spare wheel with collapsible tire .. 385
Spare wheel bolts ......................... 386
Unlocking/locking in an emergency... 387
Unlocking the vehicle.................... 387
Locking the vehicle ....................... 388
Manually unlocking the gear
selector lever
(automatic transmission*) ............ 389
Opening/closing in an emergency ..... 390
Raising retractable hardtop
manually ....................................... 390
Replacing SmartKey batteries ............ 391
SmartKey ...................................... 391Replacing bulbs .................................. 393
Bulbs............................................. 393
Replacing bulbs for front lamps .... 396
Replacing bulbs for rear lamps ..... 397
Replacing wiper blades ...................... 399
Placing wiper arms in vertical
position......................................... 399
Removing wiper blades ................. 400
Installing wiper blades .................. 400
Flat tire............................................... 401
Preparing the vehicle .................... 401
Sealing tires with TIREFIT ............. 401
Mounting the spare wheel ............ 407
MOExtended system* ................... 414
Battery ............................................... 415
Disconnecting the battery ............ 416
Removing the battery ................... 417
Charging and reinstalling battery .. 417
Reconnecting the battery ............. 418
Jump starting...................................... 419
Towing the vehicle.............................. 421
Installing towing eye bolt .............. 422
Fuses.................................................. 425
Fuse box in passenger
compartment ................................ 425
Fuse box in engine compartment . 426

316 Operation
Tires and wheels
Reactivating the Run Flat Indicator
The tire inflation pressure monitor must be
restarted in the following situations:

If you have changed the tire inflation
pressure

If you have replaced the wheels or tires

If you have installed new wheels or
tires
Using the Tire and Loading Information
placard on the driver’s door B-pillar or,
if available, the tire inflation pressure
label on the inside of the fuel filler flap,
make sure the tire inflation pressure of
all four tires is correct.
Switch on the ignition (page 37).
The standard display menu appears in
the multifunction display (
page 127).
Press buttonk orj repeatedly
until the following message appears in
the multifunction display:
Run Flat Indicator
active
Menu: R-Button
Press reset buttonJ (page 26).
The following message will appear in
the multifunction display:
Restart
Run Flat Indicator? If you wish to confirm activation:
Press buttonæ.
The following message will appear in
the multifunction display:
Run Flat Indicator
restarted
After a certain “learning phase”, the Run
Flat Indicator checks the set pressure val-
ues for all four tires.
If you wish to cancel activation:
Press buttonç.
or
Wait until the message
Restart
Run Flat Indicator?
disappears.Warning!G
The Run Flat Indicator can only warn you in
a reliable manner if you have set the correct
tire inflation pressures for each tire.
If an incorrect tire inflation pressure was
set, the system will monitor the pressure
according to the incorrect value.