MERCEDES-BENZ SLR CLASS 2007 Owners Manual

140 Controls in detail
Control system
Fuel consumption since last reset
Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
Press button j or k repeatedly
until you see the following message in
the left multifunction display:
From reset.
1Distance driven since last reset
2Average speed since last reset
3Time elapsed since last reset
4Average fuel consumption since last
resetResetting fuel consumption statistics
Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
Press button j or k repeatedly
until you see the reading that you want
to reset in the left multifunction
display.
Press and hold the reset button in the
instrument cluster (
page 114) until
the value is reset to
0.Distance to empty
Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
Press button j or k repeatedly
until you see this message in the left
multifunction display:
Range.
The calculated remaining driving range
based on the current fuel tank level ap-
pears in the right multifunction display.
Your driving style will affect the
accuracy of the calculated range.
iThe fuel consumption statistics reset auto-
matically to
0 when either of the following values
is exceeded:

distance covered: 100 000 miles

time elapsed: 10 000 hours
iIf only very little fuel is left in the tank, a
vehicle at the fuel pump is shown instead of the
range.

141 Controls in detail
Control system
TEL menu
You can use the functions in the
TEL menu
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
Switch on the telephone and the radio.
Press button ÿ or è on the
steering wheel repeatedly until you see
the
TEL menu in the left multifunction
display.Which messages will appear in the right
multifunction display field depends on
whether your telephone is switched on or
off:

If the telephone is off, the message in
the multifunction display is:
TEL OFF.

If the telephone is on:
The telephone will then search for a
network. During this time the right
multifunction display is empty.
As soon as the telephone has found a
network,
READY is indicated in the right
multifunction display.
1Signal strength
This standby message indicates that your
telephone is ready for use and you can
operate it using the control system.
Warning!G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call. If you choose to use the tele-
phone while driving, please use the
hands-free device and only use the tele-
phone when weather, road, and traffic con-
ditions permit.
Some jurisdictions prohibit the driver from
using a mobile telephone while driving a
vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.

142 Controls in detail
Control system
You may carry out the following functions:Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the right multifunction display you will then
see the message, or if available, the caller
ID (name and number):
Press button í.
You have answered the call. In the right
multifunction display you see the
length of the call.Ending a call
Press button ì.
You have ended the call. In the right
multifunction display you will again see
the standby message.FunctionPage
Answering a call142
Ending a call142
Dialling a number from the
phone book143
Redialing144

143 Controls in detail
Control system
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
Press button ÿ or è repeatedly
until you see the
TEL menu in the left
multifunction display.
In the right multifunction display you
will see the standby message.
Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. In the
right multifunction display you will see
this message
Please wait.
When the message
Please wait disap-
pears, the phone book has been
loaded.
Press button j or k repeatedly
until the desired name appears in the
right multifunction display.
The stored names are displayed in
ascending or descending alphabetical
order.
Press button í.
The system dials the selected phone
number.

If the connection is successful and this
feature is supported by your network
provider, the name of the party (if
stored in your phone book) you are
calling and the duration of the call will
appear in the multifunction display.

If no connection is made, the control
system stores the dialed number in the
redial memory.
iIf you press and hold j or k for long-
er than 1 second, the system scrolls rapidly
through the list of names until you release the
button again.
Cancel the quick search mode by pressing ì.

144 Controls in detail
Control system
Redialing
The control system stores the most recent-
ly dialed phone numbers. This eliminates
the need to search through your entire
phone book.
Press button ÿ or è repeatedly
until you see the
TEL menu in the left
multifunction display.
In the right multifunction display you
will see the standby message.
Press button í.
In the right multifunction display you
see the first number in the redial
memory.
Press button j or k repeatedly
until the desired name appears in the
right multifunction display.
Press button í.
The control system dials the selected
phone number.

145 Controls in detail
Audio system
Audio system
Audio and telephone, operation
These instructions are intended to help
you become familiar with your
Mercedes-Benz audio system. They con-
tain useful tips and a detailed description
of the user functions.Operating safetyLocation of the audio system
The audio system control panel is located
behind a cover in the upper part of the cen-
ter console.
1Cover
Briefly press on the lower part of
cover1.
The cover opens automatically.
Warning!G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the system only when road
and traffic conditions permit. Always pay full
attention to traffic conditions first before
operating system controls while driving.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car is cover-
ing a distance of 44 feet (approximately
14 m) every second.
Warning!G
Any alterations made to electronic compo-
nents can cause malfunctions.
The radio, amplifier, CD changer and
telephone are interconnected. When one of
the components is not operational or has
not been removed/replaced properly, the
function of other components may be im-
paired.
This condition might seriously impair the
operating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
by an authorized Mercedes-Benz Center.

146 Controls in detail
Audio system
Operating and display elements

147 Controls in detail
Audio system
ItemPage
1CD mode selector158
2Manual tuning
(radio)151
Fast forward/reverse
(cassette, CD)156, 160
Speed dialing memory
(telephone)165
3Radio mode selector151
4Display panel
Cassette compartment
behind display panel
ItemPage
5Alpha-numeric keypad
Band selection,
station buttons (radio)151
CD selection (CD)160
Telephone number entry,
retrieving speed dialing
memory (telephone)163
6Scanning
(radio, cassette, CD)153,
156,
160
7Function button152
8Light-emitting diode
ItemPage
9Function keys
aCassette eject155
bCassette mode selector154
cTelephone mode selector162
dSeek tuning (radio)152
Track search (cassette, CD)155,
160
Speed dialing memory
(telephone)165
eOn/off148
Volume148

148 Controls in detail
Audio system
Button and soft key operation
In these instructions, the alpha-numeric
keypad (right side of radio panel) and the
function buttons (left side of radio panel)
are referred to as “buttons”. The four keys
below the display panel are referred to as
“soft keys”.Operation
Switching on/off
Switching on:
Turn SmartKey in starter switch to
position1 or2.
or
Press control knoba.
Switching off:
Remove SmartKey from starter switch.
or
Press control knoba.Adjusting the volume
Turn control knoba.
The volume will increase or decrease
depending on the direction turned.
Adjusting audio functions
Press the
AUD key to call up the bass,
treble, balance and fader functions in the
various operating modes. Settings for bass
and treble are stored separately for the AM
and FM frequency bands, cassette mode
and CD mode.
!Do not press directly on the display face.
Otherwise the display will be damaged.
iIf the radio is switched on without the Smart-
Key in the starter switch, it will automatically
switch off again after approximately 30 minutes.
iThe volume setting can be selected
separately for the telephone and audio system.

149 Controls in detail
Audio system
Bass
Regardless of operating mode, press
the
AUD key repeatedly untilBASS
appears on the display.
Press+ or-key to increase or
decrease level.
or
Press both+ and- keys simultaneously
to reset the Bass to its center (flat)
level.Treble
Regardless of operating mode, press
the
AUD key repeatedly until TREBLE
appears on the display.
Press+ or- key to increase or
decrease level.
or
Press both+ and- keys simultaneously
to reset the Treble to its center (flat)
level.Fader
Regardless of operating mode, press
the
AUD key repeatedly untilFADER
appears on the display.
PressF orR key to shift sound accord-
ingly to the front or rear speakers.
or
Press bothF andR keys simultaneously
to reset the Fader to its center level.
iYour vehicle may or may not have the fader
function, depending on the vehicle equipment
and model.