dimensions MERCEDES-BENZ SLR CLASS 2007 Owners Manual

[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2007, Model line: SLR CLASS, Model: MERCEDES-BENZ SLR CLASS 2007
Pages: 425, PDF Size: 6.57 MB

Page 12 of 425

MERCEDES-BENZ SLR CLASS 2007 Owners Manual Contents
Flat tire .............................................. 362
Preparing the vehicle ................... 362
Sealing tires with TIREFIT ............. 362
Batteries ..........................

Page 40 of 425

MERCEDES-BENZ SLR CLASS 2007 Owners Manual 39 Getting started
Unlocking
Press the front part of the door
handle5.
The door swings outwards and
upwards automatically.
Enter the vehicle and insert the
SmartKey in the starter switch.
For mor

Page 288 of 425

MERCEDES-BENZ SLR CLASS 2007 Owners Manual 287 Operation
Tires and wheels
Rotating tires
Tire rotation can be performed on vehicles
with tires of the same dimension all
around. If your vehicle is equipped with
tires of the same dimension al

287 Operation
Tires and wheels
Rotating tires
Tire rotation can be performed on vehicles
with tires of the same dimension all
around. If your vehicle is equipped with
tires of the same dimension all around,
tires can be rotated, observing a
front-to-rear rotation pattern that will
maintain the intended rotation (spinning)
direction of the tire (
page 261).In some cases, such as when your vehicle
is equipped with mixed-size tires (different
tire dimension front vs. rear), tire rotation
is not possible.
If applicable to your vehicle’s tire configu-
ration, tires can be rotated according to
the tire manufacturer’s recommended in-
tervals in the tire manufacturer’s warranty
pamphlet located in your vehicle literature
portfolio. If none is available, tires should
be rotated every 3 000 to 6 000 miles
(5 000 to 10 000 km), or sooner if neces-
sary, according to the degree of tire wear.
The same rotation (spinning) direction
must be maintained (
page 261).
Rotate tires before the characteristic tire
wear pattern becomes visible (shoulder
wear on front tires and tread center wear
on rear tires).
Thoroughly clean the mounting face of
wheels and brake disks, i.e. the inner side
of the wheels/tires, during each rotation.
Check for and ensure proper tire inflation
pressure.For information on wheel change, see the
“Practical hints” section (
page 362).
!A wheel change should only be carried out
at an authorized Mercedes-Benz Center. Other-
wise there is a danger of damaging the vehicle by
jacking it up incorrectly.
Warning!G
Rotate front and rear wheels only if the tires
are of the same dimension.
If your vehicle is equipped with mixed-size
tires (different tire dimensions front vs.
rear), tire rotation is not possible.
Warning!G
Have the tightening torque checked after
changing a wheel. Wheels could become
loose if not tightened with a torque of
95 lb-ft (130 Nm).
Only use Genuine Mercedes-Benz wheel
bolts specified for your vehicle’s rims.